SparkFun Qwiic Ecosystem
The SparkFun Qwiic connector system makes I2C wiring simple — just plug in a cable and start reading sensors. No soldering, no jumper wires, no address headaches. Browse our range of Qwiic-compatible boards, environmental sensors, gas sensors, cables, and adapters.
Ideal for rapid prototyping, STEM education, and maker projects across Australia. Qwiic's daisy-chainable design lets hobbyists and professionals build complex sensor networks in minutes. We ship from Australia with fast local delivery.
GNSS Timing Breakout - ZED-F9T-20B (Qwiic)
SKU: SF-GPS-30975 | Brand: SparkFun
Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring e...
Delivered by Fri 28 Aug
AS7343 Qwiic Spectral Sensor
SKU: SF-SEN-23220 | Brand: SparkFun
Measure visible and near-infrared light with a compact Qwiic breakout based on the AS7343 multi-spectral sensor. It covers approximately 380nm to 1000nm and is suited to reflected, emitted and transmitted light measur...
Delivered by Fri 28 Aug
INA237 Qwiic Current Sensor
SKU: SF-SEN-31437 | Brand: SparkFun
Monitor DC current and power over I2C with this Qwiic breakout based on the Texas Instruments INA237 digital power monitor. It measures current, bus voltage, internal temperature and power for an in-line DC input usin...
Delivered by Fri 28 Aug
INA228 Qwiic Current Sensor Breakout
SKU: SF-SEN-31438 | Brand: SparkFun
This compact Qwiic breakout uses the Texas Instruments INA228 digital power monitor to measure DC current and power with high precision over I2C. The onboard 20-bit delta-sigma ADC supports readings for current, volta...
Delivered by Fri 28 Aug
SparkFun VR IMU Breakout - BNO086 (Qwiic)
SKU: SF-SEN-22857 | Brand: SparkFun
Virtual reality is in, but you shouldn't have to drop hundreds of dollars to gain access to the technology behind it. Luckily, that's where the SparkFun VR IMU Breakout comes in. At its heart is CEVA’s BNO086, a combi...
Out of stock
SparkFun 6DoF IMU Breakout - BMI270 (Qwiic)
SKU: SF-SEN-22397 | Brand: SparkFun
The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope wit...
Out of stock
SparkFun 9DoF IMU Breakout - ISM330DHCX, MMC5983MA (Qwiic)
SKU: SF-SEN-19895 | Brand: SparkFun
The SparkFun 9DoF IMU Breakout combines the high-performance ISM330DHCX 3D accelerometer and gyroscope from STMicroelectronics with the MMC5983MA triple-axis magnetometer from MEMSIC, delivering nine degrees of freedo...
Out of stock
SparkFun Mini Tristimulus Color Sensor - OPT4048DTSR (Qwiic)
SKU: SF-SEN-22639 | Brand: SparkFun
The SparkFun Qwiic Mini Tristimulus Colour Sensor features the OPT4048DTSR from Texas Instruments — a high-speed, high-precision four-channel colour sensor with spectral responses closely matching the CIE 1931 tristim...
Out of stock
SparkFun 6DoF IMU Breakout - ISM330DHCX (Qwiic)
SKU: SF-SEN-19764 | Brand: SparkFun
A Qwiic-compatible breakout board for the STMicroelectronics ISM330DHCX — a high-performance 3D accelerometer and 3D gyroscope designed for industrial applications. The 1" × 1" board communicates over I2C via the Qwii...
Out of stock
RFID Qwiic Reader for ID Innovations Modules
SKU: SF-SEN-15191 | Brand: SparkFun
This Qwiic RFID reader breakout makes it much easier to add low-frequency 125kHz RFID scanning to a project. It is designed for ID Innovations ID-3LA, ID-12LA and ID-20LA reader modules, converting the module output i...
Out of stock
STC31 CO2 Sensor (Qwiic)
SKU: SF-SEN-29260 | Brand: SparkFun
Measure high concentrations of carbon dioxide with a Qwiic breakout built around Sensirion’s STC31 sensor. It is designed for CO2 measurements up to 100% volume, using a thermal conductivity measurement principle and ...
Out of stock
Qwiic Alphanumeric Display - Red
SKU: SF-COM-16916 | Brand: SparkFun
Add letters, numbers and symbols to your project with red fourteen-segment digits that are much more flexible than a basic seven-segment display. This Qwiic display connects over I2C, so you can plug it in without sol...
Out of stock
Qwiic Power Switch
SKU: SF-PRT-26784 | Brand: SparkFun
This compact Qwiic board lets you switch power to downstream Qwiic devices so high-current modules can be turned off when they are not needed. That can help conserve energy in battery-powered builds using GNSS and oth...
Out of stock
Qwiic OLED Display - 1.5in 128x128
SKU: SF-LCD-29530 | Brand: SparkFun
This compact OLED board gives your project a crisp monochrome white-on-black interface in a 1.5-inch square form factor. With 128x128 pixels and a 1:1 aspect ratio, it suits custom graphics, menus, status screens and ...
Out of stock
Qwiic Relay - 1x1A DPDT
SKU: SF-COM-30416 | Brand: SparkFun
Control higher-power loads from a microcontroller over I2C with this Qwiic relay board. It is built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw relay, letting a low-voltage logic system switch loads up to 1A at...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
