Prototyping

SKU: AF-5099 | Brand: Adafruit

A bulk pack of 100 surface-mount 1N4148 signal diodes in SOD-123 package. These are the same fast-switching 1N4148 diodes used in through-hole projects, but in a compact SMT form factor — particularly popular for cust...

SKU: LB-LR0589-BLACK | Brand: Little Bird

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in black. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the pan...

SKU: LB-LR0589-RED | Brand: Little Bird

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in red. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel...

SKU: AF-4873 | Brand: Adafruit

A matching pair of 3-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, relia...

SKU: AF-4720 | Brand: Adafruit

This matching pair of 1.25 mm pitch 2-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set. At 40 cm long, these cables offer plenty of reach for inte...

SKU: LB-LS2238 | Brand: Little Bird

This 520-piece connector kit contains everything you need to make custom 2.54mm (0.1″) Dupont-style jumper wires and harnesses. It includes a comprehensive selection of single-row and dual-row housings from 1-pin to 2...

SKU: AF-935 | Brand: Adafruit

The MCP4725 breakout board provides a 12-bit digital-to-analogue converter (DAC) over I2C. Send a digital value and the VOUT pin outputs the corresponding analogue voltage — ideal for generating waveforms, adjustable ...

SKU: AF-1442 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in red LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired in...

SKU: LB-LS0305 | Brand: Little Bird

Soldering Solder Iron Tip Cleaner Steel Cleaning Wire Sponge BallIn order to reduce the temperature decreasing of soldering tip, you should not clean it with water.After you using the Sponge, it should be cleaned out ...

SKU: AF-1769 | Brand: Adafruit

This JST PH 2-pin SMT right-angle connector is a surface-mount header designed to accept standard JST PH 2-pin plugs. It's commonly used as a battery connector on microcontroller boards, LiPo chargers, and small elect...

SKU: AF-1683 | Brand: Adafruit

This latching pushbutton toggle switch provides a simple push on / push off action — press once to turn on, press again to turn off. It delivers a satisfying tactile click and can reliably handle up to 500 mA at up to...

SKU: DF-FIT0301 | Brand: DFRobot

 INTRODUCTIONThese are 7.8"(20cm) long jumper wires terminated as male to female. Use these to jumper from any female header on any board such as Arduino processor. Multiple jumpers can be connected next to one a...

SKU: SF-PRT-08023 | Brand: SparkFun

Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SKU: AF-149 | Brand: Adafruit

A 1.5 m (5 ft) spool of desoldering wick (braid) for removing excess solder and cleaning up solder joints. Particularly useful for surface-mount (SMT) rework — press the wick against the joint with a hot iron, and the...

SKU: SF-PRT-10651 | Brand: SparkFun

These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which...

SKU: SF-PRT-14493 | Brand: SparkFun

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make excellent pull-ups, pull-downs and current limite...

SKU: SF-PRT-16763 | Brand: SparkFun

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs th...

SKU: AF-4336 | Brand: Adafruit

A 100 mm (4″) cable fitted with JST-PH 3-pin connectors on both ends. The latching connectors provide a secure, compact connection that won't come apart easily. Colour-coded wiring makes hookup straightforward: red fo...

SKU: AF-3922 | Brand: Adafruit

A 200 mm Molex PicoBlade 2-pin cable with 1.25 mm pitch connectors. The ultra-slim PicoBlade format takes up minimal PCB space while providing a secure friction-lock connection — ideal when standard 0.1" or JST PH con...

SKU: LB-LS0153B | Brand: Little Bird

Black Wire Wrap Wire on Spool 250m 30AWG Wire Wrapping Wire, 30 AWG External Material :PVC PVC insulation, Tinned copper conductor Diameter: 0.5 mm Inner diameter:0.25 mm Length:250 meters Heat-resistant: 80 degree...