Prototyping

SKU: SF-TOL-12878 | Brand: SparkFun

This is 50g of high quality, Lead-Free Solder Paste, the perfect amount to keep around for prototyping and hobby projects that require a bit of SMD soldering. Solder Paste Stenciling is the easiest and quickest way t...

SKU: AF-3342 | Brand: Adafruit

This 2×40 right-angle edge connector fits directly onto the bottom edge contacts of the BBC micro:bit, providing access to all GPIO pins, power, and ground connections. The right-angle design is ideal for mounting on ...

SKU: AF-590 | Brand: Adafruit

A value pack of three Adafruit Perma-Proto Full-Sized Breadboard PCBs. Each board mirrors the layout of a standard full-size solderless breadboard with 60 rows of 5-hole connected pads, four power bus rails, and clear...

SKU: AF-591 | Brand: Adafruit

The Adafruit Perma-Proto Super Pack includes 9 high-quality prototyping PCBs — three of each size — so you always have the right board for whatever you're working on. Each board features through-plated, gold-finished ...

SKU: AF-1873 | Brand: Adafruit

A 16 MHz ceramic resonator with built-in load capacitors, providing a simple clock source for microcontrollers. The 3-pin package has 0.1" (2.54 mm) pin spacing for direct breadboard use — connect the two outer pins t...

SKU: SF-PRT-12791 | Brand: SparkFun

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each oth...

SKU: SF-PRT-10370 | Brand: SparkFun

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway header...

SKU: SF-PRT-10364 | Brand: SparkFun

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway header...

SKU: SF-PRT-10369 | Brand: SparkFun

A 6" (15 cm) four-wire jumper cable with 4-pin JST RE connectors on both ends, designed for board-to-board connections on standard 0.1" (2.54 mm) pitch headers. Specifications Wires – 4 Connector – 4-pin JST RE on...

SKU: SF-PRT-10368 | Brand: SparkFun

A simple 3-pin jumper wire with JST RE connectors on both ends, designed for standard 0.1" (2.54 mm) breakaway headers. Ideal for board-to-board connections, sensor hookups, and general prototyping. Specifications ...

SKU: SF-PRT-10367 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers...

SKU: DF-FIT0455-G | Brand: DFRobot

INTRODUCTION Comes in your choice of red, green, blue, yellow or white. This button locks and lights up when pushed. It's perfect for DIY projects which require a button and it's easy to mou...

SKU: AF-1814 | Brand: Adafruit

A 10-segment LED bar graph display in pure green — a vivid, true green that's much closer to blue than typical "yellow green" LEDs. At just 1" (25mm) long, it's compact enough to plug directly into a breadboard while ...

SKU: SF-PRT-10365 | Brand: SparkFun

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway hea...

SKU: SF-PRT-10366 | Brand: SparkFun

A simple 6-pin jumper wire cable with JST RE connectors on both ends. Perfect for board-to-board connections using standard 0.1" (2.54mm) breakaway headers. At 4" (100mm) long, it keeps wiring tidy in compact builds. ...

SKU: SF-PRT-10362 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway head...

SKU: SF-PRT-10359 | Brand: SparkFun

This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on ...

SKU: SF-PRT-12769 | Brand: SparkFun

Add SD card storage to your next project with this simple, through-hole SD/MMC socket. SD and MMC cards communicate over an SPI serial bus (as well as a 4-bit proprietary bus), making them easy to interface with micro...

SKU: AF-1817 | Brand: Adafruit

This 1.2″ 8×8 LED Matrix features 64 blue LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0.1...

SKU: AF-1818 | Brand: Adafruit

This 1.2″ 8×8 LED Matrix features 64 amber LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard with 0....