Prototyping

SKU: EC-WAW19001A | Brand: Elecrow

A compact quad-band GSM antenna for cellular communication projects. Compatible with 800/900/1800/1900 MHz GSM networks, making it suitable for use with GSM/GPRS modules and IoT devices that require cellular connectiv...

SKU: EF-EF04064 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: EC-CCH01065C | Brand: Elecrow

A 1×6 female stackable header with extra-long pins, designed for stacking Arduino shields. The extended legs pass through one shield's PCB and connect into the board below, allowing multiple shields to be stacked on t...

SKU: EC-DTS01559G | Brand: Elecrow

This is a GPIO expansion board for Micro: bit, it’s convenient to operate. It can be inserted the expansion board directly into the Micro: bit, and this expansion board can be cascaded.SpecificationsSize: 64 x 37 x 12...

SKU: AF-4511 | Brand: Adafruit

If you need to connect an RJ-45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet jack - this adapter will come in very handy! No soldering required - Just flick up the little levers and slide in your st...

SKU: AF-4510 | Brand: Adafruit

Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Socket to Terminal Spring Block Adapter. You get a nice solid PCB with a DE-9 socket and one line of push-terminal blocks. Just flick up the...

SKU: SF-PRT-16891 | Brand: SparkFun

This surface-mount 50-pin board-to-board connector with 0.5 mm pitch and double-slot male configuration is used on Alchitry FPGA boards. Soldered to the underside of a board, these connectors allow Alchitry FPGA board...

SKU: SF-PRT-16662 | Brand: SparkFun

A 2-pack of premium 6" male-to-male jumper wires in red and black — handy for power and ground connections where colour coding matters. Stranded core for flexibility with solid male pins on both ends for a reliable fi...

SKU: SF-PRT-16538 | Brand: SparkFun

Poke Home Connectors have been featured on a number of our boards over the last few years by providing a simple screw-terminal-type connector for easy wire connection purposes. Similar to screw terminals, Poke Home Co...

SKU: SF-PRT-15900 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: SF-PRT-15899 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: SF-PRT-15898 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 2-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: EF-EF04009 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...

SKU: EF-EF04063 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: EF-EF04036 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: EF-EF04034 | Brand: ElecFreaks

The Octopus Digital Push Button Brick is a simple momentary button module from ElecFreaks' Octopus series. It connects to Arduino, micro:bit, and other microcontroller boards via a 3-pin buckled connector — no breadbo...

SKU: EF-EF04062 | Brand: ElecFreaks

A green 5 mm LED module from the Octopus Electronic Bricks range. It connects to Arduino or micro:bit via a 3-pin sensor cable for breadboard-free, plug-and-play wiring. Control it with a digital pin (LOW = on, HIGH =...

SKU: EF-EF04038 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: EF-EF04033 | Brand: ElecFreaks

The Octopus Button Switch Brick is a simple, plug-and-play pushbutton module from the ElecFreaks Octopus Electronic Bricks series. It features a large button with a transparent cap — you can insert a custom label unde...

SKU: EF-EF04035 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...