Prototyping

SKU: AF-4897 | Brand: Adafruit

A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from y...

SKU: AF-4932 | Brand: Adafruit

A pack of 10 edge-launch USB Type-C SMT plug connectors for custom PCB designs. Each connector mounts to the edge of a board via surface-mount pads and plugs directly into a USB-C port — ideal for creating compact, pl...

SKU: AF-4924 | Brand: Adafruit

This 1.25 mm pitch 4-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal wi...

SKU: AF-4955 | Brand: Adafruit

Kailh White clicky mechanical key switches with Cherry MX compatibility. These switches deliver a tactile bump and audible click on each keystroke, providing satisfying feedback for typing and custom keyboard builds. ...

SKU: AF-4927 | Brand: Adafruit

A slim, reliable 1.25 mm pitch cable with 7-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or J...

SKU: AF-4876 | Brand: Adafruit

A matching pair of 6-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, relia...

SKU: AF-4783 | Brand: Adafruit

Here's a handy 3-pack of 2cm x 8cm Proto-board PCBs in Adafruit Black. Both sides have a black silkscreen with some row/column markings. Note that these don't have any traces between the PCB holes, you would normally ...

SKU: SF-CAB-15108 | Brand: SparkFun

This is a 5-pin JST-ZHR cable that's terminated on the end with breadboard breadboard compatible Dupont connectors. It's the same cable that comes with our SPS30 Particulate Matter Sensor and is a great spare if you n...

SKU: AF-4764 | Brand: Adafruit

These 2-prong barbed fitting connectors are designed for use with silicone tubing in air pump and valve setups. Each port has an outer diameter of approximately 4mm, creating a secure seal with 2–3mm ID silicone tubin...

SKU: SF-KIT-16549 | Brand: SparkFun

The great thing about open source is that while SparkFun has designed our own MicroMod carrier boards, that does not stop you from creating your very own MicroMod carrier board. The MicroMod DIY Carrier Kit includes f...

SKU: AF-4726 | Brand: Adafruit

A ZIF (zero insertion force) socket for wide-body SOIC-8 (200mil) chips. Flip open the latch, insert your chip, and close it to secure the IC against gold contact fingers. The bottom footprint matches the standard SOI...

SKU: SF-PRT-16766 | Brand: SparkFun

A surface-mount 4-pin JST connector in a vertical orientation, designed for the SparkFun Qwiic I2C ecosystem. This 1 mm pitch connector is used on all Qwiic-compatible boards and lets you build your own I2C devices th...

SKU: SF-PRT-16581 | Brand: SparkFun

A 2×18 pin female header with standard 0.1" (2.54 mm) pitch spacing. Mates perfectly with the Alchitry Br Prototype Element Board and other 0.1"-spaced dual-row male headers. Specifications Configuration – 2×18 (36...

SKU: AF-4447 | Brand: Adafruit

These premium female-female jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafrui...

SKU: SF-COM-16305 | Brand: SparkFun

Amphenol FCI FFC/FPC Flexible Circuit Connectors are a broad range of innovative connector solutions to terminate FFC/FPC. This 24-Pin FPC connector has a 0.5mm pitch and comes with a bottom contact in a right angle o...

SKU: AF-4482 | Brand: Adafruit

These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit bl...

SKU: AF-2598 | Brand: Adafruit

The Adafruit Feather M0 WiFi combines an ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 WiFi module for an all-in-one Arduino-compatible development board with built-in USB, battery charging, and 802.11b/g/n ...

SKU: EF-EF04026 | Brand: ElecFreaks

OCTOPUS 1-Channel Relay is a single relay electronic brick: Note: Module 5V power supply: Never use power supply more than 5V, which may cause damage to the module. Features: Relay Power Supply Voltage:<V Relay dri...

SKU: EF-EF04017 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...

SKU: SF-BOB-15035 | Brand: SparkFun

Do you need to power a project with 12V and 5V from one power supply? The ATX power connector breakout board breaks out the standard 4-pin computer peripheral port when mated with an ATX connector for your 12V and 5V ...