Prototyping

SKU: SF-SEN-08681 | Brand: SparkFun

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative po...

SKU: DF-DFR0224 | Brand: DFRobot

The Arduino Screwless Terminal Shield breaks out all Arduino Uno-compatible header pins to spring-loaded push-in terminal blocks. Press the lever, insert your wire, and release — no screwdriver needed. The shield stac...

SKU: SF-COM-08588 | Brand: SparkFun

This is a very common signal diode - 1N4148. Use this for signals up to 200mA of current. If you need a bunch of these, you can get good bulk discounts on Digikey, part # : 1N4148FS-ND Documents: Datasheet

SKU: SF-PRT-08535 | Brand: SparkFun

This 2×5 (10-pin) IDC ribbon cable with 2.54 mm pitch connectors is commonly used for AVR ISP programming and general-purpose communication between boards. The cable is 6 inches (approximately 15 cm) in length. Key F...

SKU: DF-FIT0295 | Brand: DFRobot

An assortment of 35 crystal oscillators covering 7 of the most commonly used frequencies. Keep them on hand for microcontroller projects, prototyping, and circuit experiments — no more hunting for the right crystal wh...

SKU: SF-PRT-08506 | Brand: SparkFun

A 2×5 (10-pin) shrouded box header on standard 0.1" (2.54 mm) pitch. The keyed shroud prevents reversed cable connections, making it ideal for programming headers, data buses, and other multi-pin interfaces. Key Feat...

SKU: SF-COM-12021 | Brand: SparkFun

These are bare non-addressable 1 meter long RGB LED strips that come packed with 60 5060 LEDs per meter. As these are bare LED strips that have no protective coating, your project won’t be water proof but there is acc...

SKU: SF-COM-08034 | Brand: SparkFun

A standard DIP switch with 8 individual switch positions at 0.1″ (2.54mm) pin spacing. Fits directly into breadboards and standard PCB through-holes for easy prototyping and configuration. Specifications Positions ...

SKU: SF-PRT-08025 | Brand: SparkFun

Standard 22 AWG solid Gray hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SKU: SF-COM-11975 | Brand: SparkFun

A heavy-duty, panel-mount latching pushbutton with an illuminated white LED ring. Built from stainless steel with IP65 weatherproofing, this 16mm threaded switch is designed to withstand tough environments while deliv...

SKU: SF-COM-11970 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated white LED ring. It is a SPDT with 16mm thread...

SKU: SF-COM-11968 | Brand: SparkFun

A heavy-duty, panel-mount momentary pushbutton with an illuminated green LED ring. Built from stainless steel with IP65 weatherproofing, this 16 mm threaded switch is tamper-resistant and designed for demanding enviro...

SKU: SF-COM-11951 | Brand: SparkFun

A small aluminium control knob with markings that go to eleven. Fits potentiometers with a 6mm shaft diameter using a brass insert with a set screw for secure attachment. Specifications Dimensions – 23.6 × 14.2mm ...

SKU: AF-2880 | Brand: Adafruit

This matching cable set includes one 2-pin JST SM plug and one 2-pin JST SM receptacle, each with 16cm leads. The latching connectors provide a solid, compact connection that won't come apart easily, and the polarised...

SKU: SF-PRT-00553 | Brand: SparkFun

A row of right angle male headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.

SKU: SF-PRT-00548 | Brand: SparkFun

Ever wanted to see what’s on that SIM card? Use these sockets in your next project to interface to any old SIM. 6-Pin standard connection. This is a surface mount socket, but it is large enough that it can be hand sol...

SKU: SF-COM-11840 | Brand: SparkFun

These snap-in plastic LED holders provide a clean, secure way to panel-mount 5 mm LEDs. Simply press the LED into the holder and snap the holder into a 7.5 mm (19/64″) mounting hole — no screws or adhesive required. T...

SKU: SF-CAB-00507 | Brand: SparkFun

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs. Dimensions: 36" Long

SKU: SF-PRT-11710 | Brand: SparkFun

Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid female connector on either end. They have the flexibility of stranded wire but will fit directly onto male pin headers. The only down...

SKU: SF-PRT-11709 | Brand: SparkFun

Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin head...