Prototyping

SKU: DF-DFR0123 | Brand: DFRobot

This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, th...

SKU: SF-CAB-10646 | Brand: SparkFun

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 15ft. len...

SKU: EC-CIN3232RT | Brand: Elecrow

This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....

SKU: AF-4209 | Brand: Adafruit

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead ...

SKU: LB-LR0249 | Brand: Little Bird

Note: These breadboards have a badly laid out silkscreen. They work perfectly well as breadboards, but do not rely on the printed reference markers. An 830-point solderless breadboard (MB-102) at a discounted price...

SKU: SF-COM-09939 | Brand: SparkFun

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies f...

SKU: LB-LS1372 | Brand: Little Bird

WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series).These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as s...

SKU: DF-DFR0140 | Brand: DFRobot

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be either powered from 6-12...

SKU: SF-COM-10969 | Brand: SparkFun

Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you’re gonna have the res...

SKU: SF-PRT-12795 | Brand: SparkFun

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a mal...

SKU: SF-PRT-14490 | Brand: SparkFun

Standard 330 Ω through-hole resistors rated at ¼ W with ±5% tolerance. These thick-lead versions fit securely into breadboards with minimal movement, making them reliable for prototyping. 330 Ω resistors are commonly...

SKU: LB-LR0549 | Brand: Little Bird

Description:620pcs Wire Jumper Pin Header Connector Housing Kit For Dupont and Crimp PinsSpecification: Brand:Excellway Model:TC10 Colors: Black,Silver Box Size: about 17.4x9.9x2.3cm(6.85x3.89x0...

SKU: SF-COM-11508 | Brand: SparkFun

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-fri...

SKU: AF-3351 | Brand: Adafruit

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small...

SKU: LB-LS3450 | Brand: Little Bird

A KCD4 panel-mount rocker switch with ON/OFF two-position operation and four-pin DPST (double pole, single throw) configuration. Rated for 16 A at 250 V AC, it is suitable for power switching in equipment, appliances,...

SKU: AF-3955 | Brand: Adafruit

This 200 mm cable converts a JST PH 4-pin connector into four individual wires with 0.1″ (2.54 mm) male header pins on the end. It's designed for connecting STEMMA and Grove I²C boards to breadboards, socket headers, ...

SKU: DF-DFR0229 | Brand: DFRobot

This is a Micro SD(TF) module from DFRobot. It is compatible with TF SD card (commonly used in Mobile Phone) which is the most tiny card in the market. SD module has various applications such as data logger, au...

SKU: SF-PRT-10007 | Brand: SparkFun

A set of stackable headers designed for the Arduino Uno, Arduino Pro, and other boards using the classic (pre-R3) pin layout. These female headers sit tall enough to clear the USB-B connector, making them ideal for st...

SKU: EC-ASA46530A | Brand: Elecrow

DFPlayer Mini is a compact and inexpensive MP3 module that can be connected directly to the speaker. Module can be used alone with battery power supply, speaker and keypad, or through the serial port control, as the A...

SKU: LB-LS1374 | Brand: Little Bird

WAGO's 221 Series COMPACT Splicing Connector for all wire types saves 40% more space than its predecessor (222 series).These wire connectors accommodate fine-stranded wires from 0.14 to 4 mm2 (24–12 AWG), as well as s...