Prototyping

SKU: SF-PRT-14322 | Brand: SparkFun

These stackable headers are made to work with the Particle Photon and Photon ProtoShield boards. Each header adds a great deal of connectivity to your next Photon project. Each order includes one 1x12 stackable header...

SKU: DF-FIT0008-G | Brand: DFRobot

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices of different colors. SP...

SKU: DF-FIT0181 | Brand: DFRobot

This is a high quality 2-pin screw terminal. Very useful when you want to connect 24-18AWG wires to your circuits. SPECIFICATIONS Rated voltage: 300V Rated current: 10A Contact resistence: ...

SKU: SF-COM-09349 | Brand: SparkFun

This is a very simple, clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (s...

SKU: SF-PRT-14284 | Brand: SparkFun

These are 101mm long 26AWG jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female-to-female jumpers to create a ...

SKU: DF-FIT0195 | Brand: DFRobot

A 10-pack of M3 × 6mm clear nylon screws with matching nuts. Transparent and non-conductive, these fasteners are ideal for applications requiring electrical insulation, corrosion resistance, and a clean visual appeara...

SKU: SF-PRT-09280 | Brand: SparkFun

This is a 6-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet

SKU: DF-FIT0203 | Brand: DFRobot

This is a very basic double sided prototyping board with standard 0.1" spacing through holes and four 3mm diameter mounting holes. There are 22x26 holes in total. Great for quickly prototyping stackable circuit...

SKU: SF-PRT-09194 | Brand: SparkFun

A mixed pack of 100 premium jumper wires in assorted colours, ideal for breadboard prototyping and connecting to 0.1″ headers. The pack includes 50 male-to-male and 50 female-to-female wires, each 155 mm (6″) long. T...

SKU: SF-PRT-09173 | Brand: SparkFun

These spring-loaded pogo pins with round tips are ideal for programming jigs, test fixtures, and temporary connections where you don't want to solder permanent headers. The pins fit snugly into standard perfboard hole...

SKU: DF-FIT0206 | Brand: DFRobot

This is a 1-pin female housing pin with the pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced pins. NOTE: Does not include metal crimp pins (Crimp Pins for Female Housing Pi...

SKU: SF-WRL-09143 | Brand: SparkFun

A 900/1800MHz dual-band duck antenna with 2dBi gain and an RP-SMA connector. Well suited for XBee 900MHz modules and other 900MHz radio applications. 50-ohm impedance, 105mm long. Specifications Frequency – 900/180...

SKU: DF-FIT0213 | Brand: DFRobot

This is a very sensitive and stable lever switch which is commomly used in industrial automation projects. But in your DIY projetcs or robots, this is also great for detecting objects. It can be used as a bumper sens...

SKU: DF-FIT0215 | Brand: DFRobot

A 300 mm (12") ribbon cable made of ten colour-coded jumper wires, each with female headers already attached at both ends. The wires can easily be pulled apart for individual use, making them versatile for breadboard ...

SKU: SF-COM-14196 | Brand: SparkFun

The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed...

SKU: SF-COM-14195 | Brand: SparkFun

The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed...

SKU: SF-PRT-09011 | Brand: SparkFun

USB Type ‘A’ Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable. Designed to mount to the UBW32. Documents: Datasheet

SKU: AF-2739 | Brand: Adafruit

Make some beautiful colors with these diffused rectangular 2.5mm x 5mm RGB LEDs with separate red, green and blue LED chips inside! They make nice indicators, and they're fun to color-swirl! We like dif...

SKU: SF-PRT-08808 | Brand: SparkFun

This is a very simple but extremely handy, 1" square, single sided perf board. Standard 0.1" spacing with a 4-40 (3mm) hole for mounting. Every three holes are connected with a 20mil trace.  Package of 2

SKU: DF-FIT0290 | Brand: DFRobot

This is a SOP8 to DIP8 Adapter Board. You can change the SOP8 to DIP8 packaging.So that You needn't to buy the DIP chips for prototyping specially.Just solder the SMD chips on the board and plug it into the bread b...