Prototyping

SKU: AF-4726 | Brand: Adafruit

A ZIF (zero insertion force) socket for wide-body SOIC-8 (200mil) chips. Flip open the latch, insert your chip, and close it to secure the IC against gold contact fingers. The bottom footprint matches the standard SOI...

SKU: SF-PRT-16766 | Brand: SparkFun

A surface-mount 4-pin JST connector in a vertical orientation, designed for the SparkFun Qwiic I2C ecosystem. This 1 mm pitch connector is used on all Qwiic-compatible boards and lets you build your own I2C devices th...

SKU: SF-PRT-16581 | Brand: SparkFun

A 2×18 pin female header with standard 0.1" (2.54 mm) pitch spacing. Mates perfectly with the Alchitry Br Prototype Element Board and other 0.1"-spaced dual-row male headers. Specifications Configuration – 2×18 (36...

SKU: AF-4447 | Brand: Adafruit

These premium female-female jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafrui...

SKU: SF-COM-16305 | Brand: SparkFun

Amphenol FCI FFC/FPC Flexible Circuit Connectors are a broad range of innovative connector solutions to terminate FFC/FPC. This 24-Pin FPC connector has a 0.5mm pitch and comes with a bottom contact in a right angle o...

SKU: AF-4482 | Brand: Adafruit

These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit bl...

SKU: AF-2598 | Brand: Adafruit

The Adafruit Feather M0 WiFi combines an ATSAMD21G18 ARM Cortex M0+ processor with an ATWINC1500 WiFi module for an all-in-one Arduino-compatible development board with built-in USB, battery charging, and 802.11b/g/n ...

SKU: EF-EF04026 | Brand: ElecFreaks

OCTOPUS 1-Channel Relay is a single relay electronic brick: Note: Module 5V power supply: Never use power supply more than 5V, which may cause damage to the module. Features: Relay Power Supply Voltage:<V Relay dri...

SKU: EF-EF04017 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...

SKU: SF-BOB-15035 | Brand: SparkFun

Do you need to power a project with 12V and 5V from one power supply? The ATX power connector breakout board breaks out the standard 4-pin computer peripheral port when mated with an ATX connector for your 12V and 5V ...

SKU: DF-FIT0627 | Brand: DFRobot

What do you do if you find that the line length is not enough when you do a project with Boson Kit? Or you find out the interface of Boson module is not matched with the Arduino IO expansion shield when you want to co...

SKU: AF-4350 | Brand: Adafruit

This 9-pin cable is just about 100mm / 4" long and fitted with JST-SH female connectors on both ends. Compared with chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel and are easy ...

SKU: SF-PRT-15363 | Brand: SparkFun

A compact 2×5 pin female through-hole header with 1.27 mm (50 mil) pitch. This is the standard configuration used for JTAG and SWD debugging connections on microcontroller boards. Specifications Configuration – 2×5...

SKU: AF-4184 | Brand: Adafruit

The 6mm Rainbow Tactile Button Deluxe Party Tray is a 160-piece assortment of colour-coded momentary tactile switches, each pre-assembled with a round coloured cap. The buttons come in a handy round plastic carry case...

SKU: AF-4154 | Brand: Adafruit

In this world nothing can be said to be certain, except we need headers, headers, and more headers! Each pack contains ten candy-colored 36-pin 0.1" pitch break-away male headers. &nbsp;These are a little extra ...

SKU: AF-4206 | Brand: Adafruit

These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin so you can solder them in an oven or with a very pow...

SKU: AF-4207 | Brand: Adafruit

These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin so you can solder them in an oven or with a very powerf...

SKU: DF-FIT0580 | Brand: DFRobot

This 8 AWG (10 mm²) silicone wire is designed for high-current applications that demand flexibility and heat resistance. The conductor is made from fine-strand tinned copper (0.08 mm diameter strands), twisted togethe...

SKU: SF-DEV-13819 | Brand: SparkFun

The SparkFun Arduino ProtoShield is a bare PCB with no attached or included parts that lets you customize your own Arduino shield using whatever circuit you can come up with! You will even be able to test your ci...

SKU: AF-3892 | Brand: Adafruit

For those who are fans of our silicone-covered wires, but are always looking to up their wiring game. We now have Silicone Cover Ribbon cables! These may look a lot like squid ink noodles, but they're not. The sili...