Prototyping

SKU: SF-CAB-10646 | Brand: SparkFun

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 15ft. len...

SKU: EC-CIN3232RT | Brand: Elecrow

This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....

SKU: AF-4209 | Brand: Adafruit

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead ...

SKU: AF-3814 | Brand: Adafruit

For a really long time we assumed that the JST PH didn't have a free-hanging male header version. But then we found this JST-PH 2-pin Male Cable, and we were like, this is perfect! It's not a genuine JST...

SKU: SF-COM-09939 | Brand: SparkFun

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies f...

SKU: DF-DFR0140 | Brand: DFRobot

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be either powered from 6-12...

SKU: SF-COM-10969 | Brand: SparkFun

Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you’re gonna have the res...

SKU: SF-PRT-12795 | Brand: SparkFun

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a mal...

SKU: SF-PRT-14490 | Brand: SparkFun

Standard 330 Ω through-hole resistors rated at ¼ W with ±5% tolerance. These thick-lead versions fit securely into breadboards with minimal movement, making them reliable for prototyping. 330 Ω resistors are commonly...

SKU: AF-3351 | Brand: Adafruit

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small...

SKU: DF-DFR0229 | Brand: DFRobot

This is a Micro SD(TF) module from DFRobot. It is compatible with TF SD card (commonly used in Mobile Phone) which is the most tiny card in the market. SD module has various applications such as data logger, au...

SKU: SF-PRT-10007 | Brand: SparkFun

A set of stackable headers designed for the Arduino Uno, Arduino Pro, and other boards using the classic (pre-R3) pin layout. These female headers sit tall enough to clear the USB-B connector, making them ideal for st...

SKU: EC-ASA46530A | Brand: Elecrow

DFPlayer Mini is a compact and inexpensive MP3 module that can be connected directly to the speaker. Module can be used alone with battery power supply, speaker and keypad, or through the serial port control, as the A...

SKU: AF-4210 | Brand: Adafruit

This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching f...

SKU: DF-DFR0265 | Brand: DFRobot

The DFRobot Gravity IO Expansion Shield V7.1 simplifies Arduino prototyping by breaking out all digital and analogue pins into colour-coded 3-pin (Signal, Voltage, Ground) Gravity connectors. Plug in sensors, actuator...

SKU: AF-153 | Brand: Adafruit

75 flexible stranded core wires with stiff ends molded on in red, orange, yellow, green, blue, brown, black and white. These are a major improvement over the "box of bent wires" that are sometimes sold with breadboard...

SKU: AF-290 | Brand: Adafruit

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like to have a few spools of this stuff around. We suggest picking up wire...

SKU: AF-356 | Brand: Adafruit

These are our favorite trim pots, perfect for breadboarding and prototyping. They have a long grippy adjustment knob and with 0.1" spacing, they plug into breadboards or perfboards with ease. This is the same pot t...

SKU: LB-LR0293-29 | Brand: Little Bird

These compact jumper cables feature a premium female header on one end and a grippy mini alligator clip on the other — perfect for breadboarding with non-header-friendly boards and components. Clip onto a micro:bit, C...

SKU: AF-2670 | Brand: Adafruit

Make your next project as you imagine it with prototyping perfboards that can easily be cut with scissors like these Bakelite Universal Perfboard Plates! We wanted a perfboard that was both customizable a...