Prototyping

SKU: PI-COM1304 | Brand: Pimoroni

A 4×AA battery holder with press-stud (snap) termination, providing a portable power source for wearable and on-the-go projects. With four alkaline AA batteries, it delivers approximately 6V with 7,000–10,000 mAh of c...

SKU: AF-1445 | Brand: Adafruit

A clean, rounded 16mm panel-mount momentary pushbutton in red. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. K...

SKU: AF-1518 | Brand: Adafruit

The Adafruit Flex Perma-Proto is a half-sized breadboard-layout prototyping board made from ultra-thin polyamide film. It bends, twists, and can even be cut to shape with scissors — perfect for wearables, curved enclo...

SKU: TB-SP0603 | Brand: Little Bird

A normally open SPST micro tactile switch in a compact 6×6mm package. This single-action momentary push button is designed for PCB mounting and is suitable for a wide range of electronics projects and prototyping appl...

SKU: TB-RR2846 | Brand: Little Bird

A pack of two 1 MΩ carbon film resistors rated at 1 W continuous power. These through-hole axial resistors feature colour-coded bands for easy identification and solder legs for breadboard or PCB mounting. Specificat...

SKU: AF-1494 | Brand: Adafruit

Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and s...

SKU: SS-110990032 | Brand: Seeed Studio

A pack of 50 individual jumper wires, each 100 mm long with female connectors on both ends (female-to-female). These single-pin wires are ideal for making point-to-point connections on breadboards, between header pins...

SKU: AF-1539 | Brand: Adafruit

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. We go through these guys real fast, and thought that given how ...

SKU: AF-1833 | Brand: Adafruit

This breakout board gives you easy access to all 5 pins of a USB Micro-B connector via standard 0.1" header pins. It's a simple way to add USB 5V power to a project, interface with a USB-capable microcontroller, or pr...

SKU: TB-SY4036 | Brand: Little Bird

This small, lightweight 5V SPST reed relay is designed for PCB mounting in a standard DIL (Dual In-Line) package. It switches up to 1A DC with a low 0.1W power consumption, making it suitable for low-power switching a...

SKU: TB-RR0606 | Brand: Little Bird

A pack of eight 27kΩ metal film resistors rated at 0.5W. Same physical size as standard ¼W carbon film resistors, these metal film resistors offer tighter ±1% tolerance for applications requiring greater precision. S...

SKU: AF-1872 | Brand: Adafruit

This 8 MHz ceramic resonator is a breadboard-friendly oscillator with built-in load capacitors, making it a simple drop-in timing source for microcontrollers. With 0.5% accuracy, it's well suited for everyday electron...

SKU: AF-2175 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a flat finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The flat bezel si...

SKU: AF-2102 | Brand: Adafruit

This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre ...

SKU: AF-366 | Brand: Adafruit

These 2 mm pitch 10-pin socket headers are designed specifically for XBee modules, which use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes two sockets — one for each side of the XBe...

SKU: SF-PRT-14417 | Brand: SparkFun

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system!Additionally, this connector w...

SKU: PL-2441 | Brand: Pololu

These side-entry screw terminal blocks have a pitch of 5 mm (0.197″). Each block has three terminals for the stripped ends of 22 – 14 AWG wires, and units can slide together to make longer strips. They ar...

SKU: AF-2672 | Brand: Adafruit

These 2 mm pitch 25-pin female socket headers are perfect for connecting to modules and boards that use 2 mm pin spacing instead of the standard 2.54 mm (0.1″) pitch. Each pack includes five 25-pin strips that can be ...

SKU: SF-COM-09264 | Brand: SparkFun

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicato...

SKU: TB-HP9554 | Brand: Little Bird

A versatile prototyping board with a doughnut-pad layout for building electronic circuits. Each pad is separated from its neighbours by approximately 0.5 mm, providing electrical isolation while making it easy to brid...