Prototyping

SKU: SF-TOL-12942 | Brand: SparkFun

The Bus Pirate v3.6a, created by Ian Lesnet, is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, 3-wire, UART, I2C, SPI, and HD44780 LCD protocols - all at voltages...

SKU: SF-CAB-10647 | Brand: SparkFun

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.This is a 15ft. length ...

SKU: SF-COM-10633 | Brand: SparkFun

A large 10 mm through-hole LED with a diffused green glow. The opaque epoxy package produces a soft, even light output that's easy to see from wide viewing angles — perfect for indicators, prototyping, and decorative ...

SKU: SF-COM-12877 | Brand: SparkFun

We know this looks like a lot of our other LEDs, but it’s not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin, except it i...

SKU: SF-PRT-12807 | Brand: SparkFun

A standard 2×3 male through-hole header with 0.1″ (2.54 mm) pin spacing. This is the common configuration used for ISP (In-System Programming) connectors on AVR microcontroller boards and programmers. Key Features ...

SKU: SF-PRT-12639 | Brand: SparkFun

A 3.5mm TRRS (tip, ring, ring, sleeve) audio jack in a surface-mount package. Unlike standard stereo TRS connectors, TRRS provides three conductors plus ground, allowing it to carry stereo audio along with an addition...

SKU: SF-CAB-09741 | Brand: SparkFun

These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs). Comes in a bag of five IC hooks of d...

SKU: DF-DFR0012 | Brand: DFRobot

The Arduino Nano I/O Sensor Shield acts as an expansion board for the Arduino Nano and DFRduino Nano microcontrollers. There are several different options for power input. The form factor of the Nano I/O Shield bo...

SKU: AF-816 | Brand: Adafruit

These right-angle male headers feature a 3-row configuration at standard 0.1" (2.54mm) pitch, making them ideal for connecting three-wire cables such as sensor and servo leads. Each piece is a 3×4 block, and four piec...

SKU: DF-FIT0008 | Brand: DFRobot

This compact 170-point mini breadboard is ideal for small prototyping tasks and fits neatly onto Arduino proto shields, enclosures, or project bases thanks to its strong self-adhesive backing. The solderless tie point...

SKU: SF-PRT-09353 | Brand: SparkFun

A 95-piece heat shrink tubing kit in multiple colours and sizes, all cut to a convenient 10cm length. Use heat shrink to reinforce solder connections, protect devices, electrically insulate exposed joints, and add col...

SKU: EF-EF03404 | Brand: ElecFreaks

Micro:bit Breadboard Adapter is a breadboard pinboard based on Micro:bit. It can be directly plugged into breadboard. Through this adapter, you can start various DIY creation on Micro:bit Breadboard.Features:1. Fully ...

SKU: LB-RED-100 | Brand: Little Bird

A bulk pack of 100 red 5mm through-hole LEDs. These standard LEDs are ideal for power indicators, status lights, and general-purpose projects. Key Features 5mm Diameter – Standard size for breadboards and PCBs Red...

SKU: LB-LS5179-5 | Brand: Little Bird

A pack of ten 5-pin PCB screw terminal blocks with a 2.54mm (0.1") pitch — the same spacing as standard breadboard headers. Strip a wire, insert it into the terminal, and tighten the screw for a secure, solderless ele...

SKU: LB-PT91073 | Brand: Little Bird

This 25-pack of momentary push buttons comes with colour-coded round keycaps in a handy storage case. Each button includes a matching keycap, making them easy to organise and use across projects. The assortment of fiv...

SKU: AF-5682 | Brand: Adafruit

Make cables and wiring harnesses with ease using the best crimping pliers we've used. These especially light, ergonomic, precision-machined crimpers will turn you into a pro, with no more painful struggles with pliers...

SKU: AF-5539 | Brand: Adafruit

Have you found yourself in a maze of twisty-turny knobs, all alike? These micro potentiometer (or rotary encoder) knobs offer a rainbow burst of color to your synth or control panel. They are made of a hard plast...

SKU: AF-5490 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: AF-5453 | Brand: Adafruit

Often used for floppy drives, 34 pin IDC cables have a 2x17 array of pins. This cable will let you connect one port to another with a festive rainbow design! Both ends have strain relief and keyed connectors. Perfect ...

SKU: AF-5413 | Brand: Adafruit

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's sorta like a DIY "MagSafe-styled" connector, with five 0.1" spaced...