Prototyping

SKU: DF-FIT0865 | Brand: DFRobot

A set of five solderless LED strip pigtail cables, each with a snap-down connector on one end for 10 mm wide 3-wire LED strips and a DuPont-style female connector on the other. The 20 cm colour-labelled wires with mar...

SKU: DF-FIT0863 | Brand: DFRobot

A set of five solderless snap-down connector cables for joining 10 mm wide, 3-wire LED strips with a wire bridge between them. Each cable has snap-down connectors on both ends — simply align the strip's copper pads an...

SKU: DF-FIT0627 | Brand: DFRobot

What do you do if you find that the line length is not enough when you do a project with Boson Kit? Or you find out the interface of Boson module is not matched with the Arduino IO expansion shield when you want to co...

SKU: AF-1074 | Brand: Adafruit

Spring terminal blocks will simplify your wiring and make your project more rugged. Instead of soldering wires to your perf board, solder in these 0.1" pitch terminal blocks. There's a little spring contact so you ...

SKU: SF-COM-14196 | Brand: SparkFun

The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed...

SKU: SF-PRT-09915 | Brand: SparkFun

This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector ...

SKU: DF-FIT0913 | Brand: DFRobot

A 10-pack of PH2.0-3P male-to-male cables for connecting Boson modules, UNIHIKER boards, and other modular electronics. The polarised 3-pin connectors ensure correct orientation and prevent reverse insertion. The 20cm...

SKU: SF-PRT-15899 | Brand: SparkFun

You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...

SKU: TB-HM3443 | Brand: Little Bird

A 3-pin straight locking header with 3.96 mm (0.156") pitch and crimp pins. Commonly used as a power connector on PCBs and switchmode power supplies. The locking mechanism ensures a secure connection, and connectors c...

SKU: DF-FIT0208 | Brand: DFRobot

This is a 3-pin female housing pin with the pitch of 2.54mm(0.1"). You can make customized cables that mate with 0.1"-spaced pins. NOTE: Does not include metal crimp pins (Crimp Pins for Female Housing Pins...

SKU: SF-COM-14197 | Brand: SparkFun

The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed...

SKU: SF-PRT-08232 | Brand: SparkFun

A 3-pin polarised male header with standard 0.1" (2.54mm) pin spacing. The keyed design prevents incorrect or reversed connections, making it ideal for power and sensor connections on perfboard and PCB projects. Spec...

SKU: TB-HM3173 | Brand: Little Bird

A 3-way PCB-mount screw terminal block with 5 mm pitch. Solder it to a PCB and connect wires using the screw terminals — ideal for any situation where wires need to leave a circuit board. The interlocking design allow...

SKU: SF-PRT-10368 | Brand: SparkFun

A simple 3-pin jumper wire with JST RE connectors on both ends, designed for standard 0.1" (2.54 mm) breakaway headers. Ideal for board-to-board connections, sensor hookups, and general prototyping. Specifications ...

SKU: AF-5755 | Brand: Adafruit

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin connector, this cable will do the trick. It has a 1mm pitch JST S...

SKU: TB-HM3403 | Brand: Little Bird

A 3-pin single-row crimp connector housing with 2.54 mm (0.1") pitch, designed for PCB-to-PCB or cable-to-PCB connections. The white nylon wafer housing features locking and polarising, with tin-plated brass pins that...

SKU: AF-6405 | Brand: Adafruit

This JST SH compatible cable features 1 mm pitch 3-pin connectors on both ends, making it ideal for chaining boards together or connecting to debug ports. It's perfect for use with NeoPixel JST breakout boards, UPDI p...

SKU: AF-6404 | Brand: Adafruit

If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we hav...

SKU: AF-6406 | Brand: Adafruit

If you fancy connecting to anything else with a JST SH compatible 3-pin connector, this cable will do the trick. For example, our NeoPixel JST Breakout boards, or UPDI Friend, or Sparkle Motion, or other boards we hav...

SKU: PI-COM0212 | Brand: Pimoroni

Take control of your voltage! These regulators will let you produce a reliable constant supply voltage for your circuits. Whether you're working from an unregulated supply or just need a precise voltage for your micro...