Prototyping

SKU: AF-753 | Brand: Adafruit

These 0.1 µF ceramic capacitors are an essential component for any electronics project. Placed close to the VCC pin of your ICs, they filter out power supply noise and voltage spikes that can cause unstable behaviour ...

SKU: DF-FIT0080 | Brand: DFRobot

A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...

SKU: SF-TOL-25571 | Brand: SparkFun

Master the art of soldering with the iFixit Soldering Splint by your side. Compact yet packed with utility, this tool is designed to seamlessly integrate into both intricate electronics soldering projects and those im...

SKU: LB-SOLAR-M | Brand: Little Bird

A compact micro solar panel rated at 1.5 V and 400 mA (0.65 W peak), fitted with pre-soldered male jumper wires for direct breadboard use. Its small 80×60 mm form factor makes it easy to integrate into DIY solar proje...

SKU: AF-5113 | Brand: Adafruit

Kailh Choc Low Profile Red linear mechanical key switches in a pack of 10. These ultra-low-profile switches are significantly thinner than standard MX-style switches, making them ideal for slim custom keyboards and co...

SKU: LB-00101 | Brand: Little Bird

Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to tens-of-millions of key presses, and a standard in gaming and programming keyboards across the g...

SKU: LB-LS0069 | Brand: Little Bird

The knob is designed to set directly on the potentiometer's ridges so it's an easy & secure fit. It has a nice feel, with a solid grip, tweaking it is quite fulfilling This is the white version and it has a nice de...

SKU: SF-TOL-09327 | Brand: SparkFun

Solder wick (also known as desolder braid) is made from braided copper threads treated with flux. When placed over an unwanted solder joint and heated with a soldering iron, the flux activates and draws the molten sol...

SKU: SF-COM-08375 | Brand: SparkFun

This is a very common 0.1uF capacitor. Used on all sorts of applications to decouple ICs from power supplies. 0.1" spaced leads make this a perfect candidate for breadboarding and perf boarding. Rated at 50V. If y...

SKU: SF-COM-08285 | Brand: SparkFun

A pack of super bright green LEDs in the standard 5 mm (T1¾) package with clear lenses. At 12,000 mcd, these LEDs deliver exceptional brightness suitable for indicators, lighting effects, and high-visibility projects....

SKU: SF-COM-00107 | Brand: SparkFun

This is the basic L7805 voltage regulator, a three-terminal positive regulator with a 5V fixed output voltage. This fixed regulator provides a local regulation, internal current limiting, thermal shut-down control,...

SKU: PL-1017 | Brand: Pololu

This single-row, 7-pin straight female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. It provides a reliable socket connection for board-to-board and board-to-wire applications. ...

SKU: AF-266 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten colors). They have 0.1" socke...

SKU: AF-450 | Brand: Adafruit

A pack of three 74HC595 shift register ICs. These chips take a serial input (SPI) of one byte and output those 8 bits onto 8 digital output pins. Chain multiple chips together by connecting the serial output of one to...

SKU: SF-COM-10803 | Brand: SparkFun

PICAXE-08M2 microcontroller chip. PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development e...

SKU: SF-COM-09590 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and...

SKU: DF-FIT0084 | Brand: DFRobot

A pack of 10 black straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female header...

SKU: LB-TACTILE-RED | Brand: Little Bird

A 25-pack of red tactile push buttons, perfect for prototyping and project builds. Each button features a removable coloured cap and fits directly into standard breadboards for quick, solder-free connections. Key Fea...

SKU: SF-PRT-14492 | Brand: SparkFun

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make excellent pull-ups, pull-downs and current limiters....

SKU: PRT-BK-12043 | Brand: Little Bird

This white Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jum...