Prototyping

SKU: LB-LS0111 | Brand: Little Bird

Heat Shirnk to fit your evey need!  This has 9 sizes and 7 colours all in a handy little box so you can keep your heat shrink neet and tidy.  

SKU: LB-90-USB-C | Brand: Little Bird

A 90-degree right-angle USB-C male-to-female adapter, ideal for tight spaces where a straight connector won't fit. Supports USB 3.1 Gen 2 data transfer speeds up to 10Gbps and includes multiple built-in safety protect...

SKU: LB-LS0317-220 | Brand: Little Bird

These are your run-of-the-mill 1/4 Watt  5-band resistors. Commonly used in breadboards and other prototyping applications, these 220 ohm resistors make excellent LED current limiters and are great for general...

SKU: SF-PRT-12047 | Brand: Little Bird

A compact solderless breadboard for quickly prototyping small electronics projects. With 170 tie points, it gives you enough space to build and test simple circuits without taking up much room on your bench or in an e...

SKU: LB-LR0046 | Brand: Little Bird

The 5V 1-Channel Optocoupler Relay Module provides safe, isolated switching of high-voltage loads from a microcontroller. An onboard SMD optocoupler isolates the control circuit from the relay, protecting your Arduino...

SKU: AF-160 | Brand: Adafruit

The PS1240 is a compact piezo buzzer for generating beeps, tones, and alerts in electronic projects. Drive it with a 3–30 V peak-to-peak square wave from a timer or microcontroller. It produces its loudest output arou...

SKU: LB-LR0293-13 | Brand: Little Bird

A 40-pin ribbon of male-to-male (M/M) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jum...

SKU: LB-LR0186 | Brand: Little Bird

This is a simple breadboard power supply module that is capable of 7-12V input voltage and selectable outputs (5V or 3.3V) regulated voltage. All headers are 0.1" pitch for simple insertion into a 400 point  b...

SKU: LB-LR0271 | Brand: Little Bird

A bulk pack of 500 standard 5 mm through-hole LEDs in five colours — perfect for classrooms, makerspaces, LED throwies, and any project that needs a large quantity of indicator lights on hand. Key Features 500 LEDs...

SKU: LB-10M-RESISTOR | Brand: Little Bird

A pack of ten 10MΩ (10 megaohm) carbon film resistors rated at 0.25W (¼W) with 1% tolerance. This very high resistance value is commonly used in high-impedance input buffers, electrostatic discharge protection, and le...

SKU: PI-COM0415 | Brand: Pimoroni

The rocker switch is a classic and this one is a great size for an unobtrusive on/off switch.It can be panel mounted and has two tabs for connecting wire. You can either solder wire or use a quick-connect connector.

SKU: LB-LR0289 | Brand: Little Bird

This passive buzzer is a simple sound-making component for Arduino, microcontroller and electronics projects. Unlike an active buzzer, it needs a changing signal to produce sound rather than generating a tone automati...

SKU: PL-352 | Brand: Pololu

This full-size 830-point solderless breadboard provides 63 rows of tie points with four bus lines spanning the full length of the board. It accommodates up to nine 14-pin DIP ICs or seven 16-pin DIP ICs, and labelled ...

SKU: AF-5583 | Brand: Adafruit

These Socket Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business!Socket headers are like the duct tape of electronics. They're great for connecting things, ...

SKU: LB-LR0474 | Brand: Little Bird

A handy little box of components. This includes a great variety of electronic components to use with your arduino or raspberry pi. The box includes LEDs 5 x White, Yellow, Blue, Green, Red 2 x Potentiometer 6 x Bu...

SKU: PL-967 | Brand: Pololu

This single-row, 40-pin right-angle male header strip with 0.1" (2.54mm) pitch is a versatile connector for electronics projects. The breakaway design lets you snap or cut it into any length you need, and the right-an...

SKU: LB-LS7233 | Brand: Little Bird

Upgrade your Raspberry Pi experience with our GPIO Expansion Extension Board Screw Terminal Hat! This beautifully designed screw terminal expansion version is the perfect addition to your electronic experiments. Conve...

SKU: AF-4424 | Brand: Adafruit

A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the...

SKU: DF-FIT0096-C | Brand: DFRobot

A compact 400 tie-point solderless breadboard in a crystal-clear transparent finish, with interlocking edges and self-adhesive backing. The half-size form factor (82 × 62mm) makes it ideal for small projects, and the ...

SKU: DF-FIT0179 | Brand: DFRobot

Miniature Single Pole Single Throw switches. These are high quality Omron type B3F momentary on switches. Perfect as a tactile reset switch. Mounts directly into standard bread boards also prototype shield. Rated up t...