Project Boxes

SKU: EL-MP014888 | Brand: Jaycar

A black ABS enclosure designed specifically for the Raspberry Pi 5 with a 7″ touchscreen display. Manufactured in the UK, it features precision cut-outs for all connections and dedicated ventilation slots for efficien...

SKU: LB-LS0439 | Brand: Little Bird

This case provides your Arduino R3 Uno with an extra level of protection.  Made out of clear blue plastic and with block compatible moulding you can add a hard shell to your Arduino board.

SKU: DF-FIT0788-V2 | Brand: DFRobot

##Introduction This is an Aluminum case and heat sink kit built specifically for the Raspberry Pi CM4 IoT Router Carrier Board Mini. The kit allows the Raspberry Pi CM4 IoT Router Carrier Board Mini to be safely house...

SKU: AF-6241 | Brand: Adafruit

A custom-designed snap-on enclosure for the Adafruit Feather RP2040 with DVI Output Port. 3D printed using an SLA process in translucent milky white plastic, it provides a clean, protective case with no visible layer ...

SKU: DF-FIT0968 | Brand: DFRobot

##Introduction This Expandable case is a high-quality expandable enclosure designed specifically for the LattePanda Sigma Single Board Computer Server. It offers convenient installation for various non-standard M.2 ex...

SKU: DF-FIT0949 | Brand: DFRobot

An all-metal aluminium alloy enclosure designed specifically for the LattePanda Sigma single board computer. Features a bright black anodised finish with sandblasting for a scratch-resistant, professional appearance. ...

SKU: DF-FIT0945 | Brand: DFRobot

##Introduction This meticulously crafted metal enclosure is specifically designed for the LattePanda 3 Delta Single Board Computer. The enclosure fully wraps around the entire LattePanda 3 Delta, including the mainboa...

SKU: DF-FIT0946 | Brand: DFRobot

A fanless aluminium alloy enclosure designed specifically for the LattePanda 3 Delta single board computer. The case acts as a passive heatsink, with the aluminium shell providing excellent thermal conductivity to kee...

SKU: AF-6126 | Brand: Adafruit

Here is a cute and minimal enclosure for your Adafruit bq25185 USB / DC / Solar Charger with 5V Boost Board to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate al...

SKU: AF-6114 | Brand: Adafruit

A snap-on enclosure designed specifically for the Adafruit Universal USB / DC / Solar Lithium Ion/Polymer Charger (bq24074). This 3D-printed case protects the charger board while providing full access to all ports and...

SKU: AF-6015 | Brand: Adafruit

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws...

SKU: AF-6002 | Brand: Adafruit

Here is a cute and minimal enclosure for your QT Py to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate the USB-C connector. No screws or glue are required; simpl...

SKU: AF-5981 | Brand: Adafruit

Here is a cute and minimal enclosure for your TRRS Trinkey to keep it safe during use and transport. This case has been custom designed and 3D printed to accommodate the reset button and STEMMA QT connector. No screws...

SKU: DF-FIT1020 | Brand: DFRobot

This protective back cover is designed for the UNIHIKER K10, helping shield the exposed back-side components from accidental contact and unexpected short circuits during classroom, workshop and maker use.The case is m...

SKU: AF-6402 | Brand: Adafruit

Keep your Adafruit TPS61169 Constant Current Boost Converter for LEDs protected during use and transport with this compact snap-on enclosure. It has been custom-designed and 3D printed to fit the breakout and its surr...

SKU: AF-6013 | Brand: Adafruit

Keep your Pixel Trinkey protected in use and during transport with this cute, minimal clear enclosure. It has been custom-designed and 3D printed to fit the Pixel Trinkey neatly.The case accommodates the reset button,...

SKU: AF-6301 | Brand: Adafruit

This cute, minimal enclosure is designed to help keep your compatible Adafruit Sparkle Motion board safe during use and transport. It has been custom-designed and 3D printed to accommodate the board’s peripherals.No s...

SKU: AF-6505 | Brand: Adafruit

Keep your Adafruit Terminal Block BFF board protected during use and transport with this neat, minimal snap-together case.The enclosure is custom-designed and 3D printed to fit the Terminal Block BFF Add-On and its pe...

SKU: SF-PRT-17868 | Brand: SparkFun

This compact MI:pro case protects a BBC micro:bit while keeping it portable and easy to build into projects. It is designed for both the original micro:bit V1 and the micro:bit V2, with a clear three-layer constructio...

SKU: DF-FIT0944 | Brand: DFRobot

This CNC-machined metal enclosure is designed to protect and cool a ROCK Pi 5B single board computer. The rugged aluminium housing helps shield the board from physical damage, vibration and accidental contact while ke...