Power Management

SKU: EF-EF03091 | Brand: ElecFreaks

The Wireless Charging Module can be applied in electronic equipments in common use for close wireless charging or power supply. Consisted of a transmitter and insolation coil, it could serve as a replacement for th...

SKU: SF-PRT-15353 | Brand: SparkFun

Sometimes we want our projects on, but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while only consuming minimal power (approximately 35nA) and turn your project...

SKU: DF-DFR0535 | Brand: DFRobot

DFRobot is launching a brand new series - Sunflower, focusing on high-efficiency, small power solar energy management for IoT projects and renewable energy applications.   Solar Power Manager is ...

SKU: AF-1459 | Brand: Adafruit

This inductive charging set provides wireless power transfer using a split-transformer design. The transmitter coil is powered with 9–12 V DC, and the receiver coil outputs 3.3 V DC — no direct wire connection between...

SKU: PL-2833 | Brand: Pololu

The compact (0.5″ × 0.7″) D24V10F9 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V while allowing for a maximum output current of 1 A....

SKU: AF-2789 | Brand: Adafruit

The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you ...

SKU: PL-2172 | Brand: Pololu

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it ...

SKU: SF-PRT-11214 | Brand: SparkFun

MOSFETs are awesome. They’re like a switch that you flip electronically! This SparkFun MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. The board also ha...

SKU: AF-3238 | Brand: Adafruit

This IEEE 802.3af PoE splitter separates power and data from a single PoE Ethernet cable, providing regulated 12VDC at up to 1A on a standard 2.1 mm DC barrel jack alongside a standard Ethernet data connection. It let...

SKU: AF-3310 | Brand: Adafruit

A 5.5×2.1mm DC barrel connector plug for adding a standard power connector to the end of your own wires. The outer shell unscrews to reveal solder terminals and a crimp strain relief, making it easy to wire up custom ...

SKU: SF-PRT-10287 | Brand: SparkFun

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack...

SKU: SF-PRT-10255 | Brand: SparkFun

The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery, has solder jumper selectable 5V and 3.3V output, and an under voltage protection...

SKU: SF-PRT-12711 | Brand: SparkFun

The SparkFun USB LiPoly Charger is a single-cell Li-Ion/Li-Polymer battery charging board based on the MCP73831T. It charges 3.7V LiPo cells at a selectable rate of 500 mA or 100 mA via a solder jumper, with power inp...

SKU: TB-MB3563 | Brand: Little Bird

Keep your Eneloop and other Ni-MH batteries charged and ready to go with this lightweight Panasonic charger. It charges both AA and AAA batteries and includes 4× AA Eneloop batteries straight out of the box. Eneloop ...

SKU: PL-2884 | Brand: Pololu

The Pololu D24V150F9 is a high-current synchronous step-down (buck) voltage regulator that converts input voltages up to 40V down to a fixed 9V output. With up to 15 A available output current and typical efficiencies...

SKU: SS-110060062 | Brand: Seeed Studio

The AllPixel PowerTap is a tiny accessory board (under 1" square) that simplifies power injection on long runs of LEDs. When running long LED strips, voltage drops can cause dimming and colour inconsistency — the Powe...

SKU: SF-PRT-14411 | Brand: SparkFun

The SparkFun LiPo Charger/Booster is a compact board that charges a single-cell lithium polymer battery and boosts its output to a regulated 5V at up to 1A. Built around the MCP73831 charge controller and PAM2401 boos...

SKU: SF-TOL-14100 | Brand: SparkFun

This is the big kahuna from Mean Well, a 350W single output switching power supply. This power supply is extremely reliable and beefy, able to output 24VDC at 14.6A. If you’ve been looking for a powerful power supply ...

SKU: AF-327 | Brand: Adafruit

A 1.5-metre (5 ft) extension cable with a 5.5 / 2.1 mm barrel jack (female) on one end and a barrel plug (male) on the other. Heavy-duty 24 AWG wires handle up to 5 A, making it suitable for powering LED strips, Ardui...

SKU: AF-425 | Brand: Adafruit

A 4-pin Molex power cable that matches the hard drive/CD-ROM power connectors found on AT and ATX power supplies. Use it to tap into 5V or 12V DC from a desktop power supply for your projects — a convenient source of ...