Power & Batteries

SKU: AF-6116 | Brand: Adafruit

USB C to USB B Round Panel Mount AdapterNeed a panel-mount USB C connection but don't want the hassle of cutting custom shapes? This USB C plug to USB B socket adapter makes it easy! With a 30mm diameter, you can simp...

SKU: AF-6114 | Brand: Adafruit

A snap-on enclosure designed specifically for the Adafruit Universal USB / DC / Solar Lithium Ion/Polymer Charger (bq24074). This 3D-printed case protects the charger board while providing full access to all ports and...

SKU: AF-6062 | Brand: Adafruit

The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...

SKU: DF-FIT1002 | Brand: DFRobot

The photonic thin-film battery is an advanced energy-harvesting solution that stands out from traditional solar cells and amorphous silicon photonic cells due to its higher conversion efficiency and output power. Made...

SKU: AF-5991 | Brand: Adafruit

The Adafruit USB Type C Power Delivery Dummy (I2C or Switchable) lets you tap into USB-C Power Delivery to get 5V, 9V, 12V, 15V, 18V, or 20V from any compatible USB-C charger or wall adapter — no soldering required. B...

SKU: AF-5882 | Brand: Adafruit

The Adafruit DC Power BFF Add-On lets you power your QT Py or Xiao development board from a DC source up to 20V. The on-board MPM3610 integrated buck converter steps down the input to 5V at up to 1A, with no heat sink...

SKU: SF-DEV-21868 | Brand: SparkFun

The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the...

SKU: SF-COM-21337 | Brand: SparkFun

The SparkFun 3.3V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage range of 2.7V to 5.5V. This full-size, 1in. x 1in. version of our buck regulator bo...

SKU: SF-COM-21338 | Brand: SparkFun

The SparkFun 1.8V Buck Regulator Breakout features the AP3429A step-down DC-DC converter, providing a regulated 1.8V output at up to 2A continuous current from a 2.7V to 5.5V input. An enable pin allows the output to ...

SKU: SF-CAB-21272 | Brand: SparkFun

You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The SparkFun 4-in-1 Multi-USB...

SKU: AF-5524 | Brand: Adafruit

This is a magnetic USB Type C plug! They pair with the Black Woven USB A or Type-C to Type-C Cable with Magnetic Tip . Plug your USB C power (or data!) cable into one end, then insert the little magnetic nub into your...

SKU: SF-CAB-19718 | Brand: SparkFun

This USB-A to USB-C cable features a built-in LCD display on the USB-C connector that shows real-time power draw, so you can monitor charging current at a glance. With support for up to 6A output and USB 2.0 data rate...

SKU: AF-5412 | Brand: Adafruit

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. This is a DIY "MagSafe-styled" USB cable, with four 0.1" spaced contact pogo...

SKU: AF-5436 | Brand: Adafruit

A squishy silicone button module with a built-in PWM controller and colour-changing power indicator. Press to cycle through three power levels — 100%, 70%, and 35% duty cycle — with the illuminated power symbol glowin...

SKU: DF-FIT0884 | Brand: DFRobot

This DC 5.5×2.1mm power splitter cable lets you power two DC devices from a single power source. Each cable splits one female DC jack into two male DC plugs, making it easy to share a power adapter between devices. B...

SKU: AF-5365 | Brand: Adafruit

A 30 cm cable with a standard 4-pin Molex connector, designed to tap into the 5V or 12V DC power rails of an AT or ATX power supply. Perfect for powering electronics projects directly from a desktop PSU. The connecto...

SKU: AF-5367 | Brand: Adafruit

This 5W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 940mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocryst...

SKU: AF-5369 | Brand: Adafruit

This 10W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 1,670mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocr...

SKU: AF-5356 | Brand: Adafruit

This USB micro B "JIG" Dummy Plug is a small, handy device for those interested in debugging their smartphones or other devices that use the ID pin #4 for a special signal. This plug has a 300K resistor from the ID pi...

SKU: DF-DFR0929 | Brand: DFRobot

This industrial-grade 50W high-power step-down module offers a voltage input range of 9-18V and a maximum output of 5V/10A. It has the characteristics of high isolation withstand voltage of 1500V DC or 800V AC, low ra...