More from Pi Australia

SKU: LB-BIRDBIT | Brand: Little Bird

This robot is a graphical programming robot for STEM education utilising the simple programming of the micro:bit to achieve great results.   This compact robot is plug and play allowing children to quickly learn...

SKU: LB-LS0823 | Brand: Little Bird

The Micro: bit GPIO T-type Expansion Board is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pin. This breakout board for the micro:b...

SKU: LB-LR0021 | Brand: Little Bird

High Quality Laser sensor module for Arduino.   Features: Operating Voltage: 5V PCB Size: 15*24 mm Wavelength: 650 nm Depth: 8 mm Height: 24 mm Width: 15 mm Product Weight: 2.2 g

SKU: LB-LS2218 | Brand: Little Bird

This compact solar panel is rated at 3V and 100mA, making it a useful power source for small electronics and maker projects.It comes fitted with a JST connector, so it can be wired into compatible projects without nee...

SKU: SF-DEV-20359 | Brand: SparkFun

The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, an...

SKU: AF-5302 | Brand: Adafruit

The Adafruit KB2040 is an RP2040-powered board designed specifically for mechanical keyboard builds, in the Arduino Pro Micro form factor. With castellated pads, USB-C, 8 MB of Flash, and a STEMMA QT / Qwiic connector...

SKU: EF-11098 | Brand: ElecFreaks

This compact DC micro submersible pump from ElecFreaks operates at 3V, making it easy to integrate into microcontroller-based projects. It comes equipped with male and female Dupont connectors for quick and simple wir...

SKU: LB-LR0006 | Brand: Little Bird

The infrared obstacle sensor is a compact IR proximity module designed for robotics and automation projects. It detects obstacles within a 2–40 cm range and outputs a TTL-level signal, making it easy to integrate with...

SKU: LB-LR0272 | Brand: Little Bird

Stock up your parts drawers with this bulk pack of 500 diffused 3mm LEDs. It includes 100 each of red, green, blue, white and yellow LEDs, giving you a handy mix for indicators, models, craft builds and general electr...

SKU: EC-CIN3232RT | Brand: Elecrow

This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....

SKU: SF-COM-09939 | Brand: SparkFun

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies f...

SKU: LB-LR0309-57 | Brand: Little Bird

The servo tester and controller can be used as a signal generator for electronic speed controllers.   If you are looking for a low-cost way to get a servo up and running without any programming, you can plug d...

SKU: LB-1601104 | Brand: Little Bird

USB C to 3.5mm Audio Headphone Jack DAC Adapter OverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headp...

SKU: PI-PIM721 | Brand: Pimoroni

The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or Micro...

SKU: EF-EF08209 | Brand: ElecFreaks

Documents Smart Cutebot kit

SKU: DF-DFR0478 | Brand: DFRobot

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. FireBeetle Board - ESP32 integrates a Dual-Core ESP-WROOM-32 module, which suppo...

SKU: LB-LR0030 | Brand: Little Bird

A simple analog Hall effect sensor module for detecting magnetic fields with Arduino. When a magnet is detected, the on-board LED turns on and the analog output changes proportionally to the field strength — making it...

SKU: SF-COM-09181 | Brand: SparkFun

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...

SKU: AF-592 | Brand: Adafruit

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long

SKU: LB-LS2202 | Brand: Little Bird

This compact Bluetooth amplifier board provides wireless audio playback with 5W per channel (10W total) output via dual PAM8403 amplifier chips. Stream music wirelessly from any Bluetooth 5.0 compatible device directl...