More from Pi Australia

SKU: AF-592 | Brand: Adafruit

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long

SKU: WS-14718 | Brand: Waveshare

A 1.8" colour display module designed for the BBC micro:bit, featuring 160 × 128 resolution and 65K colour support. It plugs directly into the micro:bit edge connector — no soldering required. The module includes onb...

SKU: AF-4853 | Brand: Adafruit

This simple Translucent Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable, speaker, and battery. It's translucent plastic so you ...

SKU: DF-DFR0229 | Brand: DFRobot

This is a Micro SD(TF) module from DFRobot. It is compatible with TF SD card (commonly used in Mobile Phone) which is the most tiny card in the market. SD module has various applications such as data logger, au...

SKU: AF-4900 | Brand: Adafruit

The Adafruit QT Py RP2040 puts the popular Raspberry Pi RP2040 chip into the tiny QT Py form factor. With dual-core ARM Cortex-M0+ running at 125 MHz, 264 KB SRAM, 8 MB flash, native USB, and a STEMMA QT connector, it...

SKU: DF-DFR1096 | Brand: DFRobot

The Arduino Nano ESP32 brings the ESP32-S3 (u-blox NORA-W106 module) into the familiar Nano form factor with a USB-C connector. It supports both Arduino and MicroPython programming, making it an accessible entry point...

SKU: WS-21443 | Brand: Waveshare

A USB-to-UART communication module based on the CH343G chip, offering data rates up to 6 Mbps via a USB-C connector. It supports selectable TTL output levels (3.3 V or 5 V) and works across Windows, macOS, Linux, and ...

SKU: DF-DFR0564 | Brand: DFRobot

Still using a big, bulky, traditional power adapter to charge your lithium battery? DFRobot provides you with a compact and efficient 7.4V lithium battery USB charger, only the size and weight of an ordinary Gravit...

SKU: EC-DIS10411D | Brand: Elecrow

You can use your tablets as a second or third display with this side mount clip, this clip can clamp your tablet or cell phone to your laptop to extend your screen and get multi-display experience. It is a must-have f...

SKU: LB-LR18 | Brand: Little Bird

Looking for a Robot Chassis?   Check out our 2 Wheel Robot Chassis in Blue.  Perfect for adding your own electronics to.  It comes with two motors which can be connected to your Arduino, Micro:Bit or...

SKU: PT-HDMI-CAP-USBC | Brand: Little Bird

A compact HDMI video capture adapter with a USB-C output that captures up to 1080p at 60Hz. Plug in an HDMI source — such as a camera, gaming console, or second computer — and the adapter appears as a standard webcam ...

SKU: LB-OWL-CHASSIS-V2 | Brand: Little Bird

Looking for a Robot Chassis?  Check out our 2 Wheel Robot Chassis.  Perfect for adding your own electronics to.  It comes with two motors which can be connected to your Arduino, Micro:Bit or Raspberry p...

SKU: PT-AUX-USBC | Brand: Little Bird

Introducing our cutting-edge USB Type C Headphone Jack Adapter! This innovative audio adapter allows you to easily connect your favorite headphones to any device with a USB-C port. Say goodbye to the hassle of carryin...

SKU: WS-25394 | Brand: Waveshare

Waveshare RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD, USB Debugging Downloader, With White Plastic Case Board specifications RP2040-GEEK is a geeks development boa...

SKU: AF-70 | Brand: Adafruit

Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL...

SKU: SF-DEV-10867 | Brand: SparkFun

This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics...

SKU: EF-EF04086 | Brand: ElecFreaks

A single-channel 3 V relay module from the ElecFreaks OCTOPUS series, designed for use with the BBC micro:bit. It uses a high-quality HUIKE relay capable of switching loads up to 30 A, making it suitable for controlli...

SKU: DF-DFR0144 | Brand: DFRobot

This 4-channel relay shield from DFRobot plugs directly onto an Arduino Uno or compatible board, providing opto-isolated relay switching for controlling high-power devices such as lamps, water pumps, and motors. Each ...

SKU: WS-26541 | Brand: Waveshare

Unlock the full potential of IoT development with the cutting-edge ESP32-S3 Development Board, your all-in-one solution for creating interactive and smart connected devices. This powerhouse board is designed by Wavesh...

SKU: WS-26462 | Brand: Waveshare

A programmable 3-key macro keyboard powered by the RP2040 microcontroller. Out of the box, the keys are mapped to Ctrl, C, and V — the essential copy-paste combo for programmers — but all three keys can be reprogramme...