More from Pi Australia

SKU: LB-LR0293-11 | Brand: Little Bird

A 40-pin ribbon of female-to-female (F/F) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual...

SKU: LB-LR0259 | Brand: Little Bird

This compact 9 g micro servo is an affordable, simple actuator for small mechatronics projects, robot linkages and model mechanisms. It can operate from 3.0 V to 7.2 V, with the supplied feature ratings listed at 6.0 ...

SKU: LB-LAMP | Brand: Little Bird

This learn-to-solder lamp kit lets you build a simple USB-powered light with an inline rocker switch. It is a great hands-on project for beginners practising through-hole soldering and basic circuit assembly.Once asse...

SKU: EF-EF08282 | Brand: ElecFreaks

Micro:bit Retro Programming Arcade The Microbit Retro Programming Arcade is a colorful screen joystick expansion board designed for the Microbit V2. It features a TFT 160x128 color screen, four directional buttons, tw...

SKU: LB-LR0214-16 | Brand: Little Bird

This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for switching heating or cooling loads. It uses an NTC thermistor probe (i...

SKU: LB-LS2334 | Brand: Little Bird

This USB-C powered Lithium Battery Charger Module is a great way to charge your rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method.The module has an input voltage of ...

SKU: LB-LR0309-1 | Brand: Little Bird

A bulk pack of 600 metal film resistors in 30 common values, with 20 of each. All resistors are ¼W rated with 1% tolerance. Each value is grouped on a labelled strip for easy identification and storage. Key Features ...

SKU: DF-ROB0148 | Brand: DFRobot

Maqueen Lite is a compact, pre-assembled robot for the BBC micro:bit, and the friendliest way into classroom robotics. Slot a micro:bit into the edge connector, write a few blocks in MakeCode, and it drives, follows a...

SKU: LB-LR0002 | Brand: Little Bird

The 5V 1-Channel Relay Board Module provides a simple way to switch high-voltage loads from your Arduino, Raspberry Pi, or other microcontroller project. Controlled via a 5–12V TTL signal, this relay can switch loads ...

SKU: EC-CQA23922K002 | Brand: Elecrow

UZG-01 LAN/POE WIFI USB ZigBee 3.x Coordinator Say Hello, to remake of very popular ZigStar LAN Gateway,most important addition is that is having on board PoE at/af, NEW CC2652P7 chip with support up to 300 Zigbee ...

SKU: LB-LR0228 | Brand: Little Bird

These are the popular 28YBJ-48 geared stepper motors with driver board. The motor and driver are suitable for 5V operation. 4 Phase Current : 160 mA per winding (320 mA in 4-step mode) Measured: 250mA stopped, 200...

SKU: DF-DFR0198 | Brand: DFRobot

This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PV...

SKU: EF-EF08247 | Brand: ElecFreaks

Designed for classroom and maker learning, this handheld arcade device lets students create their own games through Microsoft MakeCode Arcade. It supports a friendly blocks-based programming workflow, helping kids bui...

SKU: DF-FIT0010 | Brand: DFRobot

A 65-piece pack of male-to-male breadboard jumper wires in assorted lengths. These flexible jumper cables are essential for prototyping on solderless breadboards, making it easy to connect components, sensors, and mic...

SKU: LB-LR0128 | Brand: Little Bird

Material: Experimental Board + Mixed Alloy Color: Black Chip Module: CP2102 Working Temperature: -40 ℃ ~ +125 ℃ Power Input: 4.5V ~ 9V (10VMAX), USB-powered Drive Type: Dual high-power H-bridge driver Current: cont...

SKU: EF-EF08239 | Brand: ElecFreaks

Build robots and interactive models around a micro:bit using this brick-compatible kit from ElecFreaks. It pairs a Wukong expansion board with a large set of bricks, motors and sensors for hands-on STEM projects.The k...

SKU: LB-LORIKEET | Brand: Little Bird

The Little Bird Lorikeet is an Australian-made RGB LED board featuring five individually addressable WS2812B LEDs (NeoPixel-compatible). Control all five LEDs from a single microcontroller pin using the WS2812B serial...

SKU: EF-EF09081 | Brand: ElecFreaks

EF90D is a kind of 360 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and uses pulse width to adjust speed of the servo rotation, which also can be used to make...

SKU: LB-LS0317-10K | Brand: Little Bird

Commonly used in breadboards and other prototyping applications, these 10K ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboa...

SKU: SF-DEV-22632 | Brand: SparkFun

Arduino empowers makers’ creativity and passion for innovation with a robust new board that’s perfect for all users, from beginners to experts – allowing anyone to easily connect to the internet and create IoT proj...