More from Pi Australia

SKU: DF-ROB0148 | Brand: DFRobot

Maqueen Lite is a compact, pre-assembled robot for the BBC micro:bit, and the friendliest way into classroom robotics. Slot a micro:bit into the edge connector, write a few blocks in MakeCode, and it drives, follows a...

SKU: LB-PT-26AWG | Brand: Little Bird

A handy workbench box containing five spools of 26 AWG silicone hookup wire in blue, black, green, red, and yellow. The super-flexible silicone insulation makes this wire much easier to work with than stiffer PVC-insu...

SKU: LB-LR0002 | Brand: Little Bird

The 5V 1-Channel Relay Board Module provides a simple way to switch high-voltage loads from your Arduino, Raspberry Pi, or other microcontroller project. Controlled via a 5–12V TTL signal, this relay can switch loads ...

SKU: EC-CQA23922K002 | Brand: Elecrow

UZG-01 LAN/POE WIFI USB ZigBee 3.x Coordinator Say Hello, to remake of very popular ZigStar LAN Gateway,most important addition is that is having on board PoE at/af, NEW CC2652P7 chip with support up to 300 Zigbee ...

SKU: LB-LR0228 | Brand: Little Bird

These are the popular 28YBJ-48 geared stepper motors with driver board. The motor and driver are suitable for 5V operation. 4 Phase Current : 160 mA per winding (320 mA in 4-step mode) Measured: 250mA stopped, 200...

SKU: DF-DFR0198 | Brand: DFRobot

This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PV...

SKU: DF-FIT0010 | Brand: DFRobot

A 65-piece pack of male-to-male breadboard jumper wires in assorted lengths. These flexible jumper cables are essential for prototyping on solderless breadboards, making it easy to connect components, sensors, and mic...

SKU: LB-LR0128 | Brand: Little Bird

Material: Experimental Board + Mixed Alloy Color: Black Chip Module: CP2102 Working Temperature: -40 ℃ ~ +125 ℃ Power Input: 4.5V ~ 9V (10VMAX), USB-powered Drive Type: Dual high-power H-bridge driver Current: cont...

SKU: LB-LORIKEET | Brand: Little Bird

The Little Bird Lorikeet is an Australian-made RGB LED board featuring five individually addressable WS2812B LEDs (NeoPixel-compatible). Control all five LEDs from a single microcontroller pin using the WS2812B serial...

SKU: EF-EF09081 | Brand: ElecFreaks

EF90D is a kind of 360 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and uses pulse width to adjust speed of the servo rotation, which also can be used to make...

SKU: LB-LS0317-10K | Brand: Little Bird

Commonly used in breadboards and other prototyping applications, these 10K ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboa...

SKU: LB-LR0102 | Brand: Little Bird

The DHT22 (also known in Australia by RHT03) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor comes pre-calibrated and in a breadboard compatible module form so you don...

SKU: EC-WRF24010R | Brand: Elecrow

This module uses the newest 2.4GHz transceiver from Nordic Semiconductor, the nRF24L01.This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some e...

SKU: LB-LR0327 | Brand: Little Bird

Need more? Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using...

SKU: LB-24-LIGHT | Brand: Little Bird

Light-dependent resistors are electronic components whose resistance changes with light intensity. They are also called LDRs, photoresistors, or photoconductors.   It has four pins:3.3V  : While 'VCC'...

SKU: LB-CTCTHINK | Brand: Little Bird

Perfect for both classroom undertakings and those new to Arduino! Designed to seamlessly plug into any standard Arduino or compatible board, this shield serves as an excellent tool. Originally conceived for worksh...

SKU: LB-LS1222 | Brand: Little Bird

Attach your laptop to external monitors, flash drives, keyboards, and more with this USB adapter that extends your USB-C port to USB-A.

SKU: LB-MAKERCASE | Brand: Little Bird

Keep your favourite maker gear together and protected when you’re heading to an event, work or school. This compact zip case is sized for small electronics essentials, helping stop them from disappearing into the bott...

SKU: AF-2374 | Brand: Adafruit

Have you ever wanted comprehensive information on a diverse amount of subjects in a pocket sized, well-organized format...and not had a cell phone signal or internet connection?Look no further! This pocket referenc...

SKU: PR-PIM357 | Brand: Little Bird

The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible! Use this breakout to monitor every aspect of your indoor en...