Physical Buttons & Switches

SKU: EF-EF04033 | Brand: ElecFreaks

The Octopus Button Switch Brick is a simple, plug-and-play pushbutton module from the ElecFreaks Octopus Electronic Bricks series. It features a large button with a transparent cap — you can insert a custom label unde...

SKU: EF-EF04035 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digi...

SKU: SF-PRT-15307 | Brand: SparkFun

Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard, your own 10-key, or just a custom input for your computer Cherry MX switches give you that ...

SKU: AF-4228 | Brand: Adafruit

These Reese's Piece's lookin' bits fit perfectly on top of tactile buttons with 2.4mm square tops and give a satisfying 8mm diameter surface area for your fingers to press.You get 10 candy-colored round caps. You get ...

SKU: AF-3838 | Brand: Adafruit

These quick-connect wire pairs make wiring arcade buttons and micro switches fast and simple. Each wire comes as a pair with two 0.25" quick-connect terminals pre-crimped, terminated together in a JST 2.5mm 2-pin conn...

SKU: AF-1333 | Brand: Adafruit

This membrane keypad has a single key, but it does have an embedded surface-mount red LED installed. The flex cable is also extra-long, so we can think of a lot of wearable and portable projects that would use this so...

SKU: AF-916 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water ou...

SKU: AF-558 | Brand: Adafruit

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep wat...

SKU: AF-559 | Brand: Adafruit

A chrome-plated metal pushbutton with an illuminated red LED ring, designed for panel mounting in a 16 mm hole. The weatherproof design includes a rubber gasket to seal the enclosure against water ingress, making it s...

SKU: AF-1611 | Brand: Adafruit

A soft, squishy 4×4 silicone elastomer keypad with 16 buttons, each designed to fit a 3mm LED for optional backlighting. The conductive pad on the bottom of each button closes a contact underneath when pressed, provid...

SKU: AF-1867 | Brand: Adafruit

A breakout board with a CR1220 coin cell battery holder, an on/off switch, and 0.1″ pitch breakout pins. Ideal for powering very low-current projects or providing switchable battery backup for a real-time clock (RTC) ...

SKU: DF-FIT0115-B | Brand: DFRobot

A rugged, waterproof illuminated pushbutton designed for panel-mount applications. Built from stainless steel, this momentary switch features a blue LED ring that provides clear visual feedback, making it easy to iden...

SKU: DF-FIT0115-G | Brand: DFRobot

A waterproof stainless steel momentary pushbutton with a built-in green LED ring illuminator. Rated IP67 for dust-tight and water-resistant operation, this rugged button is ideal for panel-mount applications in both i...

SKU: DF-FIT0115-R | Brand: DFRobot

This is a water proof push button with illuminator (LED). It is made by stainless steel with excellent quality. It comes at red illuminated ring. SPECIFICATIONS Model:LAS1-AGQ 19 Diameter ...

SKU: SF-COM-09179 | Brand: SparkFun

A 33 mm round momentary pushbutton in arcade style with a convex green cap. Features a simple screw-in design for easy panel mounting — ideal for arcade builds, interactive projects, and control panels. Specification...

SKU: AF-2808 | Brand: Adafruit

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.4" PiTFT HAT and Adafruit Pi A+  case base! This Faceplate and Buttons Pack is a simple way to enclose yo...

SKU: AF-1684 | Brand: Adafruit

Push once to turn one side on, push again to turn off, push again to turn the other side on, one last push and its off again! It's basically a push-button toggle switch that connects and disconnects the middle pin fro...

SKU: SF-COM-11973 | Brand: SparkFun

This heavy-duty 16 mm metal pushbutton features a latching (on/off) mechanism with an illuminated green LED ring. Built from stainless steel with an IP65 weatherproof rating, it is designed for panel-mount application...

SKU: SF-COM-11969 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated yellow LED ring. It is a SPDT with 16mm threa...

SKU: AF-173 | Brand: Adafruit

The "poor man's" accelerometer! Tilt sensors are switches that can detect basic motion/orientation. The metal tube has a little metal ball that rolls around in it, when its tilted upright, the ball rolls onto the cont...