Physical Buttons & Switches

SKU: EF-EF04075 | Brand: ElecFreaks

OCTOPUS Magnetic Switch is a kind of electric brick carrying magnetic switch and compatible with OCTOPUS series. It mainly consists of WBSF12 dry reed switch. WBSF12 is a dry reed tube with frequently open contact ...

SKU: PR-PIM401 | Brand: Little Bird

Six handy touch-sensitive buttons and LEDs for your micro:bit. Use touch:bit as a controller for games on micro:bit's LED matrix, or combine it with the radio functionality and use it as a controller for your robot...

SKU: SF-COM-08236 | Brand: SparkFun

This is a fully assembled simple breakout board for the surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down sel...

SKU: AF-1867 | Brand: Adafruit

A breakout board with a CR1220 coin cell battery holder, an on/off switch, and 0.1″ pitch breakout pins. Ideal for powering very low-current projects or providing switchable battery backup for a real-time clock (RTC) ...

SKU: AF-5157 | Brand: Adafruit

The Adafruit NeoKey 5×6 Ortho is a snap-apart PCB grid of 30 mechanical key switch sockets, each with a reverse-mount NeoPixel LED. Break the grid along its scored tabs to create any rectangular layout you need — 2×3,...

SKU: PR-PIM277 | Brand: Little Bird

Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare boa...

SKU: PR-PIM301 | Brand: Little Bird

Button SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible! Our SHIM-format boards are designed to slip neatly onto your Pi's GPIO pins and still allow you to use HAT...

SKU: SF-COM-09277 | Brand: SparkFun

A simple breakout board for 2×2 button pads with integrated LEDs. Each LED and button is brought out to side connectors, making wiring straightforward. The board also includes footprints for 1N4148 through-hole diodes...

SKU: AF-4978 | Brand: Adafruit

The only thing better than a nice mechanical key, is one that also can glow any color of the rainbow - and that's what the Adafruit NeoKey Breakout will let you do! This little 0.75" x 0.85" PCB can fit one Cherry MX ...

SKU: M5-U025 | Brand: Little Bird

Description Dual Button, as its namesake, has two buttons with different color. If the Button unit is not enough, how about double it up to a pair. They share the exact same mechanism, button status can be detected...

SKU: AF-1616 | Brand: Adafruit

The Adafruit Trellis is an open-source backlight keypad driver system designed to work with the Adafruit 4×4 elastomer keypad and 3mm LEDs. Each tile handles keypress detection and LED control for a 4×4 grid over I2C,...

SKU: SF-SEN-12041 | Brand: SparkFun

If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use d...

SKU: SF-BOB-10467 | Brand: SparkFun

This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project. Note: Populate the board according to the polarity of the LED on the switch. The markings for the swi...