New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Zero Spy Camera for Raspberry Pi Zero
SKU: AF-3508 | Brand: Adafruit
Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your Raspberry Pi Zero but was still sm...
Delivered by Wed 18 Nov
Gravity 4Pin IIC/I2C/UART Sensor Cable (10pcs)
SKU: DF-FIT0513 | Brand: DFRobot
A pack of 10 Gravity-series 4-pin sensor cables, 30 cm long, for connecting I2C or UART sensors to Gravity-compatible boards. Each cable has a PH2.0 4-pin connector on one end and a XH2.54 DuPont connector on the othe...
Delivered by Thu 5 Nov
SparkFun Line Sensor Breakout - QRE1113 (Analog)
SKU: SF-ROB-09453 | Brand: SparkFun
This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applic...
Delivered by Tue 27 Oct
Gravity: Arduino Analog Flame Sensor
SKU: DF-DFR0076 | Brand: DFRobot
This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefig...
Delivered by Tue 27 Oct
DIY HDMI Cable Parts - Right Angle (R bend) HDMI Plug Adapter
SKU: AF-3549 | Brand: Adafruit
If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI a...
Delivered by Wed 18 Nov
Jumper Shunt with Handle (0.1 / 2.54mm) – 10 Pack
SKU: AF-3525 | Brand: Adafruit
Are you looking to jumper two neighboring male headers (2.54mm apart) without the hassle of maneuvering and re-maneuvering wires? Well then you've jumped to the right page!This pack of ten (10) 2.54mm jumpers is ...
Delivered by Wed 18 Nov
DIY HDMI Cable Parts - Right Angle (L Bend) HDMI Plug Adapter
SKU: AF-3550 | Brand: Adafruit
If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI a...
Delivered by Tue 27 Oct
DIY HDMI Cable Parts - Straight HDMI Socket Adapter
SKU: AF-3551 | Brand: Adafruit
If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDM...
Delivered by Tue 27 Oct
DIY HDMI Cable Parts - Straight HDMI Plug Adapter
SKU: AF-3548 | Brand: Adafruit
A straight HDMI plug adapter for building custom HDMI cables. Pair it with an HDMI ribbon cable and snap on any combination of DIY HDMI adapters using the flex cable clips — mix and match plugs, sockets, and angles to...
Delivered by Wed 18 Nov
DIY HDMI Cable Parts - 20 cm HDMI Ribbon Cable
SKU: AF-3561 | Brand: Adafruit
If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables...
Delivered by Wed 18 Nov
Adafruit AS7341 10-Channel Light / Color Sensor Breakout - STEMMA QT / Qwiic
SKU: AF-4698 | Brand: Adafruit
The Adafruit AS7341 is a 10-channel multi-spectral light sensor that detects not just the amount of light present, but the specific wavelengths — giving you far more detailed colour information than a simple RGB senso...
Delivered by Wed 18 Nov
Portable 3.5mm Jack Clip-on Lapel Microphone
SKU: LB-LS2184 | Brand: Little Bird
Capacitive microphone, professional metal lavalier mobile phone microphone, designed for mobile phonesWire: 2.0mm x 1.5mOmnidirectional microphone core -30±2dBDetachable clip4 gold-plated 3.5mm in-lineTensile shielded...
Delivered by Tue 27 Oct
Adafruit PiRTC - PCF8523 Real Time Clock for Raspberry Pi
SKU: AF-3386 | Brand: Adafruit
The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux...
Delivered by Tue 27 Oct
Gravity: Bright LED Module
SKU: DF-DFR0438 | Brand: DFRobot
INTRODUCTION The Bright LED module is designed for some special application. It's using a very bright LED component as its light source. Compatible with DFRobot gravity 3-Pin interface, plug and play. What you ne...
Delivered by Thu 5 Nov
ProtoBoard Pro-Double Sided
SKU: DF-FIT0193 | Brand: DFRobot
This is a very basic double sided prototyping board with standard 0.1" spacing with a 4x3mm (0.16x0.12") holes for mounting.The leaf pads makes you great for quickly prototyping stackable circuits.You can not onl...
Delivered by Thu 5 Nov
Snap-on Enclosure for Raspberry Pi Pico / W / 2 / 2W
SKU: AF-6252 | Brand: Adafruit
A custom-designed snap-together enclosure for the Raspberry Pi Pico, Pico W, Pico 2, and Pico 2 W. 3D printed using an SLA process in translucent milky white plastic, the case allows the power LED to shine through whi...
Delivered by Wed 18 Nov
Big Game Button with Enclosure 100mm USB Green
SKU: LB-LS7008-G | Brand: Little Bird
Make a big, satisfying entrance in a quiz, game or interactive project with this 100mm green button. It has a durable plastic enclosure, a tactile click and a light-up button.It acts as a USB keyboard device, so you c...
Delivered by Tue 27 Oct
Maqueen Lite V5 micro:bit Robot Kit for STEM (Line Tracking & Obstacle Avoidance)
SKU: DF-MBT0046 | Brand: DFRobot
This classroom-ready robot platform is built to make micro:bit STEM lessons smoother, with line tracking, obstacle avoidance, lighting effects and expansion options in a compact robot car format.The Maqueen Lite V5 ar...
Delivered by Thu 5 Nov
RP2350 1.8" AMOLED Touch Development Board – 368x448, QSPI, Accelerometer & Gyroscope
SKU: WS-31295 | Brand: Waveshare
Product Description: Unleash your creative potential with the cutting-edge RP2350 1.8inch AMOLED Touch Display Development Board—a versatile and powerful tool for all your development needs. With its rich display and ...
Delivered by Wed 18 Nov
Magnet Square - 0.125
SKU: SF-COM-08644 | Brand: SparkFun
These are very small rare earth magnets - 0.125" cubed. Composed of Neodymium/Iron/Boron (NdFeB), these magnets are curiously strong and make for a great way to attach tools to a metal workbench, hold small children t...
Delivered by Tue 27 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared