New Arrivals

SKU: AF-4286 | Brand: Adafruit

The Adafruit DS3502 is an I2C-controlled digital potentiometer that lets your microcontroller adjust resistance programmatically — no manual knob-turning required. Simply send a command over I2C from an Arduino, Circu...

SKU: SF-DEV-15421 | Brand: SparkFun

NOT COMPATIBLE WITH THE TEENSY 4. For compatible version, see Teensy Audio Adaptor Board (Revision D)This is the Teensy Audio Adapter Board that can be added to a Teensy 3.0, 3.1, 3.2, 3.5 or 3.6 for your next au...

SKU: SF-SEN-15335 | Brand: SparkFun

The SparkFun 9DoF IMU Breakout brings InvenSense's ICM-20948 9-axis motion tracking sensor to a Qwiic-enabled breakout board with an on-board logic level shifter and broken-out GPIO pins. The ICM-20948 is an extremely...

SKU: LB-LR0293-5 | Brand: Little Bird

This HDMI-to-VGA adapter cable converts a digital HDMI signal to analogue VGA output, letting you connect HDMI devices like a Raspberry Pi, laptop, or media player to a VGA monitor, projector, or LCD screen. It featur...

SKU: DF-DFR0557 | Brand: DFRobot

The Gravity I2C LCD1602 is a 16×2 character LCD display module from DFRobot's Gravity series, redesigned with a clean modern look and simplified I2C interface. It eliminates the need for contrast adjustment, retains b...

SKU: LB-LR0309-20 | Brand: Little Bird

A simple single-slot 9V battery holder case with wire leads for soldering or connecting directly to your projects. Keeps your battery secure and organised. Key Features Wire Leads – Pre-attached cables for direct s...

SKU: LB-LR0003 | Brand: Little Bird

This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound inte...

SKU: AF-2601 | Brand: Adafruit

The Adafruit RGB Matrix Shield simplifies connecting HUB75-type RGB LED matrices to Arduino-compatible boards. Instead of wiring up a bundle of individual connections, this shield handles all the routing for you — jus...

SKU: AF-4097 | Brand: Adafruit

A versatile triple-axis digital accelerometer breakout featuring the Analog Devices ADXL343. With selectable sensitivity of ±2g, ±4g, ±8g, or ±16g and up to 13-bit resolution, this sensor handles everything from preci...

SKU: AF-1168 | Brand: Adafruit

A silver-coloured woven conductive fabric made from copper and nickel-plated nylon. Highly conductive with a resistance of less than 1 Ω per 30 cm in any direction across the textile. Use it to create soft switches, p...

SKU: LB-FLICKER | Brand: Little Bird

Looking to make a candle?  Want a flicking LED without the effort of programming it?Look no further than these Flame Flickering LEDs.Great for all your paper circuit projects to give a random flickering effect.Ch...

SKU: CB-11945692935 | Brand: Chibitronics

Color your world with Chibitronics MegaPack of 30 tropical LED circuit stickers.  This pack includes 10 pink, 10 orange, and 10 green LED circuit stickers.  Limited Edition, quantities limited.  

SKU: AF-1439 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in red LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger in...

SKU: AF-4026 | Brand: Adafruit

The Adafruit STEMMA Soil Sensor uses capacitive measurement to detect soil moisture — a more durable approach than resistive sensors that corrode over time. With a single probe and no exposed metal, it avoids oxidatio...

SKU: KI-5601B | Brand: Kitronik

The Edge Connector Breakout Board for the BBC micro:bit provides easy access to all of the processor pins on the micro:bit's edge connector. Pre-built with pin headers already soldered, it's ready to use straight out ...

SKU: LB-LR0281-5-B | Brand: Little Bird

This 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows blue when applied with the appropriate voltage. Whilst EL wire looks similar to a thin neon tube, the wire is in ...

SKU: LB-ETEXTILELED-YG | Brand: Little Bird

A single yellow-green LED module designed for e-textiles projects. Each unit features sewable tabs so it can be stitched directly into fabric using conductive thread. The thicker PCB design makes it more durable than ...

SKU: LB-LS0153B | Brand: Little Bird

Black Wire Wrap Wire on Spool 250m 30AWG Wire Wrapping Wire, 30 AWG External Material :PVC PVC insulation, Tinned copper conductor Diameter: 0.5 mm Inner diameter:0.25 mm Length:250 meters Heat-resistant: 80 degree...

SKU: AF-1757 | Brand: Adafruit

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...

SKU: AF-2315 | Brand: Adafruit

The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini cons...