New Arrivals

SKU: SF-ROB-15324 | Brand: SparkFun

Does controlling door and cabinet access with the power of Electromagnetism interest you? Excellent! In effect, this latch / lock solenoid is an electronic lock. When powered with 12VDC source, the latch is pulled in,...

SKU: DF-DFR0553 | Brand: DFRobot

DFRobot I2C ADS1115 16-bit ADC module can accurately collect and convert analog signals. Through this ADC module, Raspberry Pi can easily use a wide range of Gravity series analog sensors to measure various signals...

SKU: LB-LR0380 | Brand: Little Bird

A set of six precision ESD-safe tweezers for electronics work. Each tweezer has a different tip profile for various tasks, from fine-pitch SMD component placement to general handling. The antistatic coating protects s...

SKU: LB-LR0005 | Brand: Little Bird

The Line Trace Sensor Module uses an infrared emitter/detector pair to measure the reflectivity of a surface below it. When the reflectivity exceeds an adjustable threshold, the output goes low — making it ideal for b...

SKU: LB-00022 | Brand: Little Bird

The Cherry MX Blue switch is a light, tactile, clicky mechanical keyboard switch in the Cherry MX family. Keyboards with these switches often have the stiffer Cherry MX Green switch for the space bar.

SKU: LB-00021 | Brand: Little Bird

Reshipping an order via Regular Parcel Post

SKU: SF-PRT-14491 | Brand: SparkFun

A pack of 20 through-hole 10 kΩ resistors with thick leads designed for a snug fit in solderless breadboards. These are standard ¼ W, ±5% tolerance PTH resistors — ideal for pull-ups, pull-downs, current limiting, and...

SKU: KI-5642 | Brand: Kitronik

The Kitronik STOP:bit is a pre-assembled traffic light board designed for the BBC micro:bit. It replicates a real traffic light with three 10 mm LEDs (red, amber, green) driven directly from the micro:bit's I/O pins (...

SKU: LB-LR0399 | Brand: Little Bird

This straight bar load cell (strain gauge) converts applied force or weight into a proportional electrical signal, with a maximum capacity of 5kg. It uses four strain gauges arranged in a Wheatstone bridge configurati...

SKU: LB-ETEXTILELED-O | Brand: Little Bird

This is a simple single unit ORANGE E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB ...

SKU: AF-1648 | Brand: Adafruit

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display, for a different size. Works great, just carefully open the connect...

SKU: DF-TEL0038 | Brand: DFRobot

A passive RS-232 to RS-485 converter that extends serial communication distance up to 1.2km using balanced differential signalling. Self-powered from the RS-232 TX/RX or RTS/CTS lines — no external power supply requir...

SKU: DF-FIT0117 | Brand: DFRobot

An assortment of 100 aluminium electrolytic capacitors across 12 common values, ranging from 1µF to 470µF. A handy kit for prototyping, decoupling, and general-purpose circuit building — covers the most frequently use...

SKU: DF-FIT0154 | Brand: DFRobot

These high-quality breadboard jumper cables are made with 22 AWG multi-strand wire and sturdy male pins on both ends. Each cable is approximately 214 mm long and comes in assorted colours for easy circuit identificati...

SKU: DF-DFR0205 | Brand: DFRobot

This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V. You can choose 5V direct output voltage with the conv...

SKU: DF-FIT0266 | Brand: DFRobot

A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black w...

SKU: AF-2910 | Brand: Adafruit

This super slim, super tiny, and super cute Micro-B to USB on-the-go adapter is so slim, tiny, and cute that we'd pinch its cheeks if it was big enough to have cheeks.  At just ~15.5mm long, ~11.3mm wide, an...

SKU: SF-COM-00102 | Brand: SparkFun

Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general control switch.

SKU: AF-97 | Brand: Adafruit

A blank metal tin in the classic Altoids mints size — the larger format, perfect for housing electronics projects that need a bit more room. A popular choice for DIY builds and portable project enclosures. Specificat...

SKU: DF-DFR0144 | Brand: DFRobot

This 4-channel relay shield from DFRobot plugs directly onto an Arduino Uno or compatible board, providing opto-isolated relay switching for controlling high-power devices such as lamps, water pumps, and motors. Each ...