New Arrivals

SKU: WS-25742 | Brand: Waveshare

A 2.42″ monochrome OLED display module from Waveshare with 128 × 64 resolution, driven by the SSD1309 controller. It supports both 4-wire SPI and I2C interfaces with an onboard voltage translator, and Waveshare provid...

SKU: WS-25587 | Brand: Waveshare

The Waveshare OLED/LCD HAT (A) combines a 2-inch IPS LCD main screen with dual 0.96-inch blue OLED secondary screens on a single Raspberry Pi HAT. It's ideal for displaying system stats, status indicators, and small g...

SKU: DF-DFR0975 | Brand: DFRobot

FireBeetle 2 ESP32-S3 is a high-performance main controller built around the ESP32-S3-WROOM-1-N16R8 module. ESP32-S3-WROOM-1-N16R8 comes with 16MB Flash and 8MB PSRAM for storing more data. The acceleration for neural...

SKU: AF-5710 | Brand: Adafruit

The Feather RP2040 with DVI Output lets you drive an HDMI monitor or television directly from a microcontroller. The on-board HDMI connector outputs digital video (DVI) at 640×480 or 800×480 resolution using the RP204...

SKU: AF-5708 | Brand: Adafruit

The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. Th...

SKU: DF-DFR0971 | Brand: DFRobot

This 2-Channel I2C DAC module can output a voltage of 0-10V, which is a standard driver in industrial applications. It can be widely used with most 0-10V devices on markets such as light controllers, inverters, valves...

SKU: MD-B0180 | Brand: Makedo

A bulk top-up pack of 180 Makedo SCRU connectors — the cornerstone of the Makedo cardboard construction system. Each SCRU can connect up to three layers of corrugated cardboard, holding creations together quickly and ...

SKU: DF-SEN0529 | Brand: DFRobot

BMM150 is a low-power and low-noise 3-axis geomagnetic sensor from Bosch for compass applications. It allows measurements of the magnetic field and compass angle in three perpendiculars within a measuring range of ±13...

SKU: AF-5643 | Brand: Adafruit

The Adafruit SPI FLASH Breakout features a W25Q128 chip providing 128 Mbit (16 MByte) of non-volatile flash storage over a standard SPI interface. It's ideal for adding compact, low-power external storage to microcont...

SKU: AF-5463 | Brand: Adafruit

This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...

SKU: DF-MBT0021-EN-18650 | Brand: DFRobot

Note: micro:bit board and batteries are not included. What’s new in Maqueen Plus V2? 1. This is the 18650 battery version 2. New plastic box with a deeper base, enough room for the assembled car 3. Frosted acrylic p...

SKU: AF-5449 | Brand: Adafruit

A USB Type-C Power Delivery (PD) cable that converts any PD-capable USB-C power adapter into a 9V DC barrel jack output at up to 5A. The built-in PD sink negotiation chip communicates with your adapter to request 9V o...

SKU: SF-CAB-19717 | Brand: SparkFun

A USB-C to USB-C cable with a built-in LCD display that shows real-time power draw — so you can see exactly how much power your device is pulling. Supports up to 100W USB PD (Power Delivery) at 5A, with USB 2.0 data t...

SKU: DF-FIT0816 | Brand: DFRobot

A compact cooling kit for the Raspberry Pi 3B, 3B+, and 4B featuring an aluminium heatsink with a built-in 9-blade cooling fan. The heatsink surface is designed with slots to maximise heat dissipation, while the fan p...

SKU: DF-FIT0736 | Brand: DFRobot

These hook test clips provide a quick, solder-free way to connect to breakout boards, IC pins, and circuit test points. The set includes 10 wires in 5 colours for easy circuit identification, with silicone-insulated l...

SKU: DF-DFR0804 | Brand: DFRobot

Does sound quality matter to you? If Yes, then come to take a look at this HIFI Bluetooth Power Amplifier board! With AM interference suppression and filtering function, the board THD can be as low as 0.1% even when w...

SKU: DF-DFR0884 | Brand: DFRobot

This dual-USB step-down buck converter accepts 8–32V DC input and delivers a regulated 5V output at up to 3A across two USB Type-A ports simultaneously. With over 85% conversion efficiency and built-in reverse-connect...

SKU: DF-FIT0801 | Brand: DFRobot

A compact DC-powered vacuum pump ideal for beginners building inflatable or pneumatic projects. With a power consumption of just 2.5W at 5V, it can share the same power supply as DC motors or servo systems in your pro...

SKU: AF-5183 | Brand: Adafruit

The DHT20 is a nice but inexpensive temperature and humidity sensor from the same folks that brought us the DHT22.This little sensor looks an awful lot like the popular DHT11/DHT22 temperature and humidity s...

SKU: AF-4479 | Brand: Adafruit

The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring ...