New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Make: Arduino Bots and Gadgets
SKU: SF-BOK-10626 | Brand: SparkFun
Want to build your own robots, turn your ideas into prototypes, or control devices with a computer? It’s a snap with this book and the Arduino open source electronic prototyping platform. Get started with six fun proj...
Delivered by Thu 29 Oct
Adafruit TFT 50pin to 40pin + AR1100 Touchscreen Adapter
SKU: AF-3305 | Brand: Adafruit
The Adafruit TFT 50-Pin to 40-Pin + AR1100 Touchscreen Adapter converts Adafruit RTD266X driver boards with 50-pin TFT connectors to work with 40-pin TFT displays. It also includes a built-in AR1100 resistive touch co...
Delivered by Fri 20 Nov
SparkFun LED Driver Breakout - TLC5940 (16 Channel)
SKU: SF-BOB-10616 | Brand: SparkFun
The TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface. This breakout board is a good way to take full advantage of thi...
Delivered by Mon 9 Nov
Particle Photon
SKU: DF-DFR0373 | Brand: DFRobot
The Particle Photon is a compact WiFi development board for building connected Internet of Things (IoT) projects and products. Powered by a Broadcom BCM43362 WiFi chip and an STM32F205 ARM Cortex M3 microcontroller ru...
Delivered by Mon 9 Nov
Silicone Bumpers - Large (10x16.5mm, 4 pack)
SKU: SF-COM-10594 | Brand: SparkFun
Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or...
Delivered by Mon 9 Nov
Encoder Adapter
SKU: DF-FIT0324 | Brand: DFRobot
INTRODUCTION This adapter is especially designed for DFRobot 12V DC Motors, adding the compatibility factor for those products without customized connectors or external power supplies. ...
Delivered by Mon 9 Nov
Upper Deck for MiniQ
SKU: DF-DFR0310 | Brand: DFRobot
Time to upgrade! This is a upper deck PCB for the 2WD MiniQ Robot Chassis. It is compatible with 9g micro servo and URM ultrasonic mounting bracket. With this upper deck you can upgrade the MiniQ with more senso...
Delivered by Mon 9 Nov
0.1 (2.54mm) Crimp Connector Housing: 2x12-Pin 5-Pack
SKU: PL-1921 | Brand: Pololu
These 2×12-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable 24-wire conn...
Delivered by Thu 29 Oct
0.1 (2.54mm) Crimp Connector Housing: 1x16-Pin 5-Pack
SKU: PL-1920 | Brand: Pololu
These 1×16-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable multi-wire c...
Delivered by Thu 29 Oct
Red Electroluminescent (EL) Tape Strip - 100cm w/two connectors
SKU: AF-445 | Brand: Adafruit
EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The othe...
Delivered by Fri 20 Nov
SparkFun Electric Imp Breakout
SKU: SF-BOB-12886 | Brand: SparkFun
If you aren’t familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. The SparkFun Electric Imp Breako...
Delivered by Thu 29 Oct
Micro DC Geared Motor 6V 96RPM
SKU: DF-FIT0419 | Brand: DFRobot
INTRODUCTION This is a new micro DC geared motor, using planetary gear mechanism, applicable to the various types of DIY project. Especially the project which has a certain requirements for ...
Delivered by Mon 9 Nov
SparkFun Sunny Buddy - MPPT Solar Charger
SKU: SF-PRT-12885 | Brand: SparkFun
This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel ...
Delivered by Mon 9 Nov
Blue Electroluminescent (EL) Tape Strip - 100cm w/two connectors
SKU: AF-447 | Brand: Adafruit
EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The othe...
Delivered by Fri 20 Nov
BNC Connector - Right Angle
SKU: SF-PRT-10550 | Brand: SparkFun
BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut. Documents: Dimensional Drawing
Delivered by Mon 9 Nov
BlocklyProp Starter Kit
SKU: AF-3337 | Brand: Adafruit
Learning to invent is fast and fun with no code-typing or circuit-soldering to slow things down. The BlocklyProp Starter Kit has all the hardware required to fully learn the Parallax’s Blockly visual programming to...
Delivered by Fri 20 Nov
EL wire 4xAAA pocket inverter
SKU: AF-564 | Brand: Adafruit
A small, portable inverter for EL wire. Powers off of 4 AAA batteries (not included!), it can drive 3-4 meters (10 to 13 feet) of our high-brightness EL wire OR 1 meter (3 feet) of EL tape OR a 10cmx10cm piece of E...
Delivered by Fri 20 Nov
RF Link Transmitter - 434MHz
SKU: SF-WRL-10534 | Brand: SparkFun
A simple 434 MHz ASK RF transmitter module for creating basic one-way wireless data links. Breadboard-friendly and easy to pair with a microcontroller, this transmitter works with compatible 434 MHz receiver modules t...
Delivered by Mon 9 Nov
RF Link Receiver - 4800bps (434MHz)
SKU: SF-WRL-10532 | Brand: SparkFun
The RF Link Receiver is a simple 434 MHz wireless receiver module designed for one-way data communication with a compatible 434 MHz transmitter. It fits easily into a breadboard and pairs with microcontrollers to crea...
Delivered by Mon 9 Nov
0.1 (2.54mm) Crimp Connector Housing: 2x7-Pin 5-Pack
SKU: PL-1915 | Brand: Pololu
These 2×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable fourteen-wire...
Delivered by Thu 29 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared