New Arrivals

SKU: LB-LR0005 | Brand: Little Bird

The Line Trace Sensor Module uses an infrared emitter/detector pair to measure the reflectivity of a surface below it. When the reflectivity exceeds an adjustable threshold, the output goes low — making it ideal for b...

SKU: SF-PRT-14491 | Brand: SparkFun

A pack of 20 through-hole 10 kΩ resistors with thick leads designed for a snug fit in solderless breadboards. These are standard ¼ W, ±5% tolerance PTH resistors — ideal for pull-ups, pull-downs, current limiting, and...

SKU: KI-5642 | Brand: Kitronik

The Kitronik STOP:bit is a pre-assembled traffic light board designed for the BBC micro:bit. It replicates a real traffic light with three 10 mm LEDs (red, amber, green) driven directly from the micro:bit's I/O pins (...

SKU: LB-LR0399 | Brand: Little Bird

This straight bar load cell (strain gauge) converts applied force or weight into a proportional electrical signal, with a maximum capacity of 5kg. It uses four strain gauges arranged in a Wheatstone bridge configurati...

SKU: AF-1648 | Brand: Adafruit

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display, for a different size. Works great, just carefully open the connect...

SKU: DF-TEL0038 | Brand: DFRobot

A passive RS-232 to RS-485 converter that extends serial communication distance up to 1.2km using balanced differential signalling. Self-powered from the RS-232 TX/RX or RTS/CTS lines — no external power supply requir...

SKU: DF-FIT0117 | Brand: DFRobot

An assortment of 100 aluminium electrolytic capacitors across 12 common values, ranging from 1µF to 470µF. A handy kit for prototyping, decoupling, and general-purpose circuit building — covers the most frequently use...

SKU: DF-FIT0154 | Brand: DFRobot

These high-quality breadboard jumper cables are made with 22 AWG multi-strand wire and sturdy male pins on both ends. Each cable is approximately 214 mm long and comes in assorted colours for easy circuit identificati...

SKU: DF-DFR0205 | Brand: DFRobot

This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V. You can choose 5V direct output voltage with the conv...

SKU: DF-FIT0266 | Brand: DFRobot

A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black w...

SKU: AF-2910 | Brand: Adafruit

This super slim, super tiny, and super cute Micro-B to USB on-the-go adapter is so slim, tiny, and cute that we'd pinch its cheeks if it was big enough to have cheeks.  At just ~15.5mm long, ~11.3mm wide, an...

SKU: SF-COM-00102 | Brand: SparkFun

Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general control switch.

SKU: SF-COM-00096 | Brand: SparkFun

High-quality radial electrolytic capacitors rated at 100 µF / 25 V. Ideal for power supply decoupling, transient suppression, and smoothing voltage ripple in your projects. Place one between power and ground rails to ...

SKU: AF-97 | Brand: Adafruit

A blank metal tin in the classic Altoids mints size — the larger format, perfect for housing electronics projects that need a bit more room. A popular choice for DIY builds and portable project enclosures. Specificat...

SKU: AF-3064 | Brand: Adafruit

By popular request - we now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable comes with an in-line Switch - click once t...

SKU: DF-DFR0144 | Brand: DFRobot

This 4-channel relay shield from DFRobot plugs directly onto an Arduino Uno or compatible board, providing opto-isolated relay switching for controlling high-power devices such as lamps, water pumps, and motors. Each ...

SKU: AF-147 | Brand: Adafruit

These multi-size wire strippers are a versatile everyday tool for electronics work. With built-in stripping notches for 20–30 AWG wire, integrated wire cutters, plier tips, and a wire loop, they handle most common str...

SKU: SF-BOB-11189 | Brand: SparkFun

The ‘must have’ IC for TTL/CMOS projects finally has its own breakout board! This is the RS232 converter IC that is capable of running at 3V and communicating with 5V logic.We’ve taken the SOIC package MAX3232 and bro...

SKU: SF-PRT-11026 | Brand: SparkFun

If you need to knock up a quick prototype there’s nothing like having a pile of jumper wires to speed things up, and let’s face it: sometimes you want quantity over quality. These are the same jumper wires that com...

SKU: SF-PRT-12796 | Brand: SparkFun

These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header. Combine these with our male to male jumpers to create a male to f...