New Arrivals

SKU: AF-1821 | Brand: Adafruit

This 1.2″ 8×8 LED Matrix features 64 bright white LEDs arranged in a square grid, perfect for building scrolling signs, simple animations, or small pixel displays. The compact package plugs directly into a breadboard ...

SKU: SF-SEN-12728 | Brand: SparkFun

Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Termina...

SKU: DF-SEN0192 | Brand: DFRobot

INTRODUCTION The microwave sensor applies the Doppler effect to detect moving objects using microwaves. This differs from the method used by a regular infrared (IR) sensor as microwave is...

SKU: AF-661 | Brand: Adafruit

A compact 1″ diagonal OLED display with 128×32 white pixels driven by the SSD1306 controller. Each pixel is individually lit, delivering sharp, high-contrast graphics with no backlight needed — resulting in excellent ...

SKU: DF-DFR0382 | Brand: DFRobot

An Arduino-compatible shield featuring a 4-digit 7-segment digital tube display (common cathode, 0.56") with 5 input buttons. Uses I2C to drive the display, providing an easy interface for menus, controls, and numeric...

SKU: AF-1859 | Brand: Adafruit

This 2.4"/61mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Anten...

SKU: SF-PRT-12718 | Brand: SparkFun

PCB mount clip to hold a AAA battery. Sold in single units, you’ll need two for each battery. These work great for small, low power applications that need a battery to run. Low cost and easy to use!Documents:Datasheet

SKU: AF-1895 | Brand: Adafruit

The Adafruit I2C Non-Volatile FRAM Breakout provides 256 Kbit (32 KByte) of fast, non-volatile storage for your microcontroller projects. FRAM (Ferroelectric RAM) combines the speed of SRAM with the persistence of EEP...

SKU: SF-BOB-12708 | Brand: SparkFun

This is the SparkFun Real Time Clock (RTC) Module, this little breakout that uses the DS1307 to keep track of the current year, month, day as well as the current time. The module comes fully assembled and includes a s...

SKU: DF-FIT0457 | Brand: DFRobot

INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting h...

SKU: AF-666 | Brand: Adafruit

You built an educational mini UAV! Adafruit offers a fun and exciting stickers to celebrate achievement for electronics, science and engineering. We believe everyone should be able to be rewarded for learning a ...

SKU: SF-PRT-10210 | Brand: SparkFun

Here is a six pin horizontal 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards, but are actually the much ...

SKU: DF-FIT0468 | Brand: DFRobot

This compact micro metal gear motor features a 50:1 gear ratio and a D-profile metal output shaft, making it ideal for small robotics platforms and wheeled projects. The shaft dimensions are compatible with Pololu 42×...

SKU: AF-670 | Brand: Adafruit

Celebrate a useful skill with this "Bike Repair" achievement sticker from Adafruit. Hand them out in classrooms, workshops, makerspaces, and maker faires to reward beginners on their skill-building journey — or stick ...

SKU: AF-677 | Brand: Adafruit

Connect this to that without soldering using these quick terminal blocks. They allow connecting of two sets of four wires together using just a flat-head screwdriver. These are UL rated to carry up to 15 Amps, so they...

SKU: AF-1899 | Brand: Adafruit

The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...

SKU: AF-1906 | Brand: Adafruit

The Pixy2 (CMUcam5) is a smart vision sensor that can be taught to detect objects, track lines, and identify intersections — all at 60 frames per second. It offloads image processing from your microcontroller, sending...

SKU: AF-3422 | Brand: Adafruit

The Adafruit Arcade Bonnet makes it easy to build retro gaming projects with a Raspberry Pi. It's sized to match the Pi Zero for compact builds, but works with any Pi that has a 2×20 header (Pi Zero, Pi 2, Pi 3, Pi B+...

SKU: SF-ROB-10189 | Brand: SparkFun

Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power...

SKU: AF-687 | Brand: Adafruit

A glossy vinyl "Catapult" achievement sticker — reward yourself or your students for building a catapult! Perfect for laptops, workbenches, notebooks, and more. Key Features Material – Glossy vinyl, made to last M...