New Arrivals

SKU: DF-SEN0121 | Brand: DFRobot

This is a steam(water)sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up. Notic...

SKU: AF-2659 | Brand: Adafruit

A pack of 10 miniature 3535-format (3.5 × 3.5 mm) NeoPixel RGB LEDs with white casing and integrated WS2811-compatible driver chips. These are half the size of standard 5 × 5 mm NeoPixels, making them the most compact...

SKU: SF-CAB-14093 | Brand: SparkFun

The Adam Tech Wall Adapter Cable (EU) provides a safe, ready-made connection between a European mains outlet and compatible power supplies. Terminated with a standard CEE 7/7 plug at one end and three colour-coded ins...

SKU: AF-2686 | Brand: Adafruit

Itsy Bitsy Teenie Weenie Mini NeoPixel RGB LEDinis! Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. These MINI (3.5mm x 3.5mm) RGB LEDs&nbs...

SKU: AF-2807 | Brand: Adafruit

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.8" PiTFT and Adafruit Pi B+ / Pi 2 case base! This Faceplate and Buttons Pack is a simple way to enclose your ...

SKU: DF-FIT0291 | Brand: DFRobot

This is a SOP8/SOP16/SOP28 to DIP16/DIP28 Adapter Board.You can change the SOP8/SOP16/SOP28 to DIP16/DIP28 packaging. So that You needn't to buy the DIP chips for prototyping specially.Just solder the SMD chips on ...

SKU: AF-2808 | Brand: Adafruit

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.4" PiTFT HAT and Adafruit Pi A+  case base! This Faceplate and Buttons Pack is a simple way to enclose yo...

SKU: DF-FIT0251 | Brand: DFRobot

This is a white spiral cable guide. This spiral makes it very easy to control your cables after they've already been plugged in, or when you have many cables going to differnet places. NOTE: Longer sleeving is av...

SKU: DF-SEN0140 | Brand: DFRobot

The DFRobot 10 DOF MEMS IMU Sensor combines four sensors on a single compact board — the ADXL345 accelerometer, ITG-3205 gyroscope, HMC5883L magnetometer, and BMP085 barometric pressure sensor. Together they provide 1...

SKU: SF-SEN-08713 | Brand: SparkFun

This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but...

SKU: AF-2778 | Brand: Adafruit

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give you a higher DC voltage! It's a handy way to power ...

SKU: AF-2876 | Brand: Adafruit

A full-size wireless keyboard with slim chiclet keys and an integrated trackpad on the right-hand side. The trackpad supports both left and right clicks, eliminating the need for a separate mouse. At just 7 mm thick, ...

SKU: DF-SER0030 | Brand: DFRobot

This is a most powerful standard servo motor from DFRobot so far. A servomotor is a rotary actuator that allows precise control of angular position. This is specifically designed for the robotics application which ...

SKU: SF-ROB-12105 | Brand: SparkFun

These enclosures allow you to mount your micro gearmotor to other Actobotics products easily. Once your gearmotor is inserted, you can take advantage of the 0.77” hole pattern. These enclosures have a length of 1.14”,...

SKU: SF-PRT-08613 | Brand: SparkFun

Two pin, compact surface mount connector. We really like the solid locking feeling and high current rating on these small connectors. Documents: Datasheet

SKU: SF-PRT-08619 | Brand: SparkFun

An empty canvas for electrical enthusiasts! Designed to fit the SFE project enclosures this project board gives you 8x10cm (3.15x3.94") of building space for through-hole components with 2.54mm (100mil) spaced hole...

SKU: SF-COM-08579 | Brand: SparkFun

BlinkM is a “Smart LED”, a networkable and programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displ...

SKU: DF-DFR0220 | Brand: DFRobot

The Arduino Due is Arduino's first ARM-based development board, powered by the Atmel SAM3X8E — a 32-bit Cortex-M3 processor running at 84MHz. With 54 digital I/O pins, 12 analogue inputs, 2 DAC outputs, and USB-OTG, i...

SKU: DF-SEN0057 | Brand: DFRobot

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtr...

SKU: SF-COM-12096 | Brand: SparkFun

This 0.012" Flexinol® Actuator Wires (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or current is applied to it and are made spec...