New Arrivals

SKU: SF-CAB-14166 | Brand: SparkFun

A pair of 24 AWG wires, each terminated with a female insulated spade connector at one end and a braided wire lead at the other. At 0.9 m (3 ft) long and rated for up to 300 VDC, these versatile cables are suitable fo...

SKU: DF-FIT0231 | Brand: DFRobot

High quality switching 'wall wart' 'wall adapter' AC to DC 12V 1A wall power supply. These are switch mode power supplies which mean the output is regulated to 12V(no more 14V outputs!). They take 100-240Vac 50/60Hz ...

SKU: SF-PRT-08995 | Brand: SparkFun

Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below. Sold in single units.

SKU: SF-PRT-08993 | Brand: SparkFun

A standard Phillips head machine screw with 2-56 thread and a length of 9.5 mm (3/8"). Compatible with 2-56 nuts for securing panels, button pads, and small electronic assemblies. Specifications Head Type – Phillip...

SKU: SF-PRT-08870 | Brand: SparkFun

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snug...

SKU: AF-2793 | Brand: Adafruit

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid ...

SKU: AF-2792 | Brand: Adafruit

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid ...

SKU: SF-PRT-08866 | Brand: SparkFun

Standard 22 AWG stranded hook-up wire in white. Stranded wire is more flexible than solid core, making it ideal for projects where the wire needs to bend or will be subject to repeated movement and stress. Specificat...

SKU: DF-FIT0261 | Brand: DFRobot

INTRODUCTION Shape Memory metals that were developed by NASA for the space industry, and have been used for increasing applications down on earth.For example,there have been limited studie...

SKU: SF-PRT-08865 | Brand: SparkFun

Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'.

SKU: SF-DEV-14129 | Brand: SparkFun

The Ardumoto Shield is a dual-motor controller for Arduino based on the L298 H-bridge. It can drive two DC motors at up to 2A per channel, making it an excellent platform for RC vehicles and small autonomous robots. ...

SKU: SF-COM-08861 | Brand: SparkFun

Huge 10mm through-hole LEDs. Features: 515-520nm Green 3.0-3.4VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 16,000-22,000 MCD output Documents: Datasheet LED Tutorial

SKU: AF-2884 | Brand: Adafruit

The FeatherWing Proto is a prototyping add-on board compatible with all Adafruit Feather boards. It provides duplicate breakouts for every Feather pin, a grid of proto holes for custom circuitry, and connected pad str...

SKU: SF-COM-08860 | Brand: SparkFun

Huge 10mm through-hole LEDs. Mood-light an entire wall! Features: 465-470nm Blue 3.0-3.4VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 8,000-10,000 MCD output Documents: Datasheet LED Tutorial

SKU: SF-PRT-08811 | Brand: SparkFun

A 2" (50 mm) square double-sided perfboard with standard 0.1" (2.54 mm) hole spacing. Features 4-40 (3 mm) mounting holes in the corners for easy installation in enclosures or stacking multiple boards. Specifications...

SKU: DF-SEN0121 | Brand: DFRobot

This is a steam(water)sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up. Notic...

SKU: SF-PRT-08780 | Brand: SparkFun

A compact RS232-to-TTL level shifter board that converts both TX and RX lines bidirectionally. Powered from your target application's supply voltage, it automatically converts RS232 signals to match — run it at 5 V fo...

SKU: AF-2659 | Brand: Adafruit

A pack of 10 miniature 3535-format (3.5 × 3.5 mm) NeoPixel RGB LEDs with white casing and integrated WS2811-compatible driver chips. These are half the size of standard 5 × 5 mm NeoPixels, making them the most compact...

SKU: SF-CAB-14093 | Brand: SparkFun

The Adam Tech Wall Adapter Cable (EU) provides a safe, ready-made connection between a European mains outlet and compatible power supplies. Terminated with a standard CEE 7/7 plug at one end and three colour-coded ins...

SKU: AF-2686 | Brand: Adafruit

Itsy Bitsy Teenie Weenie Mini NeoPixel RGB LEDinis! Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. These MINI (3.5mm x 3.5mm) RGB LEDs&nbs...