New Arrivals

SKU: AF-2658 | Brand: Adafruit

A set of three SIM card adapters that let you use a single SIM card across devices with different slot sizes. Includes two Nano-to-Standard adapters and one Micro-to-Standard adapter, plus a SIM ejector pin for easy r...

SKU: DF-FIT0106 | Brand: DFRobot

A pack of ten 6-pin female headers with standard 0.1″ (2.54mm) pin spacing. Commonly used for Arduino shield connections and general prototyping. Key Features Standard 0.1″ Pitch – Compatible with breadboards, Ardu...

SKU: AF-2675 | Brand: Adafruit

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.3" diagonal, and very readable due to the high contrast of an OLED display. This display is mad...

SKU: DF-DFR0162 | Brand: DFRobot

This is Version 2.0 of the Xboard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol without the need of a voltage level converter. The XBoard is a...

SKU: DF-DFR0173 | Brand: DFRobot

A low power version of the USB-RLY16 module, the USB-RLY16L is powered solely from the USB bus and provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The relays are SPCO (Single ...

SKU: SF-PRT-14338 | Brand: SparkFun

This isn’t your ordinary power supply. The Global Power Supply is a 15V, 4.34A power device specifically designed to work with the JustBoom Amp HAT for the Raspberry Pi. Additionally, as this is a “global” power su...

SKU: DF-FIT0164 | Brand: DFRobot

This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields. SPECIFICATIONS Pins are spaced by 0.1" Size: 15.58x23.05x2.4mm(0.9x0.6x0.1") (Pins: 15 mm)(Pin...

SKU: SF-COM-14325 | Brand: SparkFun

A basic 125 kHz RFID tag with a unique 40-bit ID, ideal for access control, identification, and automation projects. The tag uses the EM4001 ISO-based RFID IC with Manchester encoding. This blank, smooth, credit-card...

SKU: DF-FIT0008-BE | Brand: DFRobot

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices for different colors. S...

SKU: DF-FIT0008-R | Brand: DFRobot

A compact 170-point solderless breadboard with a self-adhesive backing for mounting to project enclosures, robot chassis, or proto shields. The red board measures 46 × 36 mm (1.8 × 1.4″) and is compatible with the Ard...

SKU: DF-FIT0008-BK | Brand: DFRobot

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices of different colours. SPECIF...

SKU: SF-PRT-14321 | Brand: SparkFun

A standard 1×12 female header designed for the Particle Photon and Photon ProtoShield boards. Add reliable, stackable connectivity to your next Photon project with this 0.1" (2.54mm) pitch header. While designed for ...

SKU: DF-FIT0171 | Brand: DFRobot

The DFRobot FIT0171 is a 150W DC-DC buck-boost converter that accepts 8–40V DC input and provides a stable 24V DC output at up to 6A. Housed in a waterproof, shockproof enclosure, it is well suited for mobile robots, ...

SKU: DF-FIT0172 | Brand: DFRobot

A waterproof DC-DC step-up converter that takes 8–18V DC input and outputs a stable 24V at up to 10A (240W). The sealed, shockproof enclosure makes it suitable for robotics, outdoor installations, and demanding enviro...

SKU: DF-DFR0174 | Brand: DFRobot

The XBee USB Adapter V2 is an update version from DFRobot. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The Atmega8U2 firmware uses the standard USB ...

SKU: DF-FIT0170 | Brand: DFRobot

The 120W DC-DC Converter steps down a 15–40V DC input to a stable 12V output at up to 10A, making it an ideal regulated supply for embedded PCs, robots, and 12V accessories powered from higher-voltage battery systems....

SKU: DF-FIT0014 | Brand: DFRobot

How can your robot rule the world with an iron fist if it doesn't have a hand? This LG-NS robot gripper makes a great addition to a small arm or mobile base. The gripper features injection molded components and ...

SKU: DF-DFR0185-GY | Brand: DFRobot

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a very ...

SKU: DF-DFR0185-P | Brand: DFRobot

Electroluminescent (EL) wire is a thin, flexible, phosphor-coated wire that emits a bright, even glow when driven by a high-voltage AC source. This 3-metre length of purple EL wire is 3 mm in diameter, making it easy ...

SKU: SF-ROB-09347 | Brand: SparkFun

Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-p...