New Arrivals

SKU: SF-BOB-13717 | Brand: SparkFun

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-friendly arrangement and spacing, and even adds a couple of decou...

SKU: SF-COM-13716 | Brand: SparkFun

The FemtoBuck is a compact, single-channel constant-current LED driver capable of driving high-power LEDs at up to 350 mA with input voltages up to 36 V. Dimming is controlled via PWM or an analog signal (0–2.5 V), an...

SKU: DF-SEN0143 | Brand: DFRobot

This Infrared Proximity Sensor made by Sharp (model: GP2Y0A41SKOF) has an analog output which varies from 3.1V (4cm) to 0.3V (30cm) with a supply voltage between 4.5 and 5.5V DC. This sensor is great for sensing obje...

SKU: DF-SEN0168 | Brand: DFRobot

This Triple Axis Accelerometer with Bosch BMA220 is an ultra small triaxial, low-g acceleration sensor breakboard with SPI and I2C interface, aiming for low power consumer market applications. It allows measurem...

SKU: DF-TEL0073 | Brand: DFRobot

Bluno Bee is a serial to bluetooth 4.0 module, it adopts XBEE form factor which is compact and is compatible with all shields with XBEE socket. Bluno Bee is designed to have voltage regulator which supports bot...

SKU: SF-PRT-11542 | Brand: SparkFun

A standard 0.1" (2.54 mm) pitch male header pin strip with 10 pins, designed for surface-mount applications where through-hole pins are not suitable. The SMD legs are staggered for stress relief during soldering. Key...

SKU: SF-COM-13705 | Brand: SparkFun

The PicoBuck is a three-channel constant-current LED driver based on the AL8805. Each channel drives LEDs at 330 mA by default, with a solderable jumper to increase the maximum to 660 mA per channel. Dimming is contro...

SKU: AF-155 | Brand: Adafruit

This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move with...

SKU: AF-3000 | Brand: Adafruit

Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sew...

SKU: PL-1115 | Brand: Pololu

This double-row, 14-pin (2×7) extended male header with 0.1" (2.54mm) pitch features extra-long 22.85mm pins — significantly longer than standard headers. The extended length is useful for making connections that span...

SKU: PL-1114 | Brand: Pololu

This single-row, 2-pin extended male header with 0.1" (2.54mm) pitch features extra-long 22.85mm pins — significantly longer than standard headers. The extended length is useful for making connections that span greate...

SKU: SF-COM-11453 | Brand: SparkFun

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LED...

SKU: SF-COM-11442 | Brand: SparkFun

The SparkFun 7-Segment Serial Display combines a 4-digit 7-segment LED display with an ATmega328 microcontroller, allowing you to control every segment using just a few serial lines. It supports three communication in...

SKU: DF-DFR0125 | Brand: DFRobot

The DFRduino Ethernet Shield V2.1 is now released. This version of Ethernet Shield is not only compatible with Mega 1280 and 2560, but also provides a Micro SD card slot for reading/writing. DFRduino Ethernet ...

SKU: SF-COM-11450 | Brand: SparkFun

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LED...

SKU: AF-178 | Brand: Adafruit

A 100 mm linear soft potentiometer (ribbon sensor) manufactured by Spectra Symbol. This pressure-sensitive ribbon controller features an adhesive backing for easy mounting and provides a variable resistance output bas...

SKU: SF-COM-11448 | Brand: SparkFun

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LED...

SKU: AF-182 | Brand: Adafruit

This sensor can detect flexing or bending in one direction. They were popularized by being used in the Nintendo PowerGlove as a gaming interface.These sensors are easy to use, they are basically resistors that change ...

SKU: DF-DFR0060 | Brand: DFRobot

The Arduino-Compatible Screw Shield is a terminal expansion board that can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can u...

SKU: SF-ROB-13656 | Brand: SparkFun

This NEMA 23 bipolar stepper motor delivers 125 oz·in of holding torque with 200 steps per revolution (1.8° step angle). Equipped with extra-long 600 mm AWG22 wires, it's designed for CNC applications where longer cab...