New Arrivals

SKU: AF-1363 | Brand: Adafruit

Add some extra boom to your audio project with these powered loudspeakers. We sampled half a dozen different models to find ones with a good frequency response, so you'll get quality audio output for music playback...

SKU: AF-1374 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: PI-PPMB00130 | Brand: Pimoroni

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control w...

SKU: PI-COM1700 | Brand: Pimoroni

The AM2320 is a digital temperature and humidity sensor with an I2C interface. Its straightforward I2C communication makes it easy to connect to any Raspberry Pi or Arduino, and it works alongside other I2C sensors an...

SKU: AF-1328 | Brand: Adafruit

Turn any 2.1 mm barrel-jack wall adapter into a handy bench power supply with this adapter cable. The moulded DC barrel jack connects to your power supply, while colour-coded alligator clips (red for centre-positive, ...

SKU: SF-DEV-15025 | Brand: SparkFun

The SparkFun Pro nRF52840 Mini is a breakout and development board for Nordic Semiconductor’s nRF52840 – a powerful combination of ARM Cortex-M4 CPU and 2.4GHz Bluetooth radio. With the nRF52840 at the heart of your p...

SKU: EF-EF08195 | Brand: ElecFreaks

*note colour may varyLearning about electronics and programming can be simple and fun! The Robit Smart Car is an ideal starting point for those new to electronics and programming. This gentle introduction to robo...

SKU: SF-COM-15111 | Brand: SparkFun

USB-C is quickly becoming more and more prominent in the maker community because, let’s be honest, who likes trying three times to insert USB into a port? This is a 16-pin, female, USB Type C connector that is commonl...

SKU: AF-3990 | Brand: Adafruit

Analog panel meters are arguably not as blingy or flashy as LEDs, but their simplicity adds a touch of elegance and makes them easier to read quickly.This Large 5V Analog Panel Meter is about handheld-size, ...

SKU: AF-3954 | Brand: Adafruit

Upgrade your button-pad projects with full-colour NeoPixel backlighting. The NeoTrellis RGB Driver PCB is a 4×4 keypad controller with 16 NeoPixels and an onboard seesaw I2C chip that handles both button scanning and ...

SKU: AF-3987 | Brand: Adafruit

Show off your maker spirit with the Adafruit Circuit Playground Lanyard, designed by artist Bruce Yan. This vibrant, double-sided lanyard features the beloved Circuit Playground characters in full colour on durable 2c...

SKU: AF-4036 | Brand: Adafruit

Have you put up with mainstream, uninspiring, low-tech tree ornaments for too long? This season why not deck the halls with codes of holly? This DIY Ornament Kit is just the right size (6 cm diameter) for a Circui...

SKU: AF-1427 | Brand: Adafruit

The Adafruit 16×8 LED Matrix Driver Backpack is a breadboard-friendly breakout for the HT16K33 multiplexed LED driver. Unlike the pre-configured LED backpacks, this version breaks out all 16 anode and 8 cathode pins, ...

SKU: LB-LS1026 | Brand: Little Bird

The CJMCU-MPU9150 is a 9-axis motion tracking breakout board based on the InvenSense MPU-9150 System in Package (SiP). It combines a 3-axis gyroscope, 3-axis accelerometer, and 3-axis digital compass (magnetometer) in...

SKU: LB-LS0801 | Brand: Little Bird

Feeling musical?  Limited by the lack of sound on your micro:bit?This fun little module will add light and sound to your micro:bit project.It has 13 capacitive touch keys which you can use as a mini piano to unle...

SKU: TB-WQ7407 | Brand: Little Bird

Connect DVI-D to HDMI systems.   Specifications Audio/Video Signal Type HDMI Lead Output Connection Plug Output Quantity 1pc Lead Output Type DVI-D Input Quantity 1pc Lead Input Connection Plug L...

SKU: LW-LB-650-0151-00A1 | Brand: Little Bird

The littleBits Bluetooth Low Energy Bit (marked "BLE" on your Bit) is the easiest way to control your inventions wirelessly, from any smart device (like a phone or tablet). All you need is the littleBits Invent app...

SKU: AF-1446 | Brand: Adafruit

This stuff is called "wire-wrap wire" because it used to be used for wire-wrapping high-speed digital circuits on a special kind of contact board. It's pretty rare to see wire-wrapping in these days of low-cost PCB...

SKU: DEV-14356 | Brand: Little Bird

The pi-topPROTO is a HAT-compatible add-on board for prototyping electronics for your pi-top or pi-topCEED. With plenty of space available to build circuits that can interact with your pi-top — as well as a full 40-pi...

SKU: AF-3929 | Brand: Adafruit

Cut through cardboard like butter with the Canary Box Cutter. This Japanese-made tool is perfectly engineered, way better than using scissors or a craft knife.This is the perfect tool for cardboard-crafting-trashbot e...