New Arrivals

SKU: SF-CEL-15054 | Brand: SparkFun

This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands. Combined with an SMA to U.FL Adapter, this duck antenna works perfectly with our LTE Cat M1/NB-IoT Shi...

SKU: AF-3874 | Brand: Adafruit

This 5V electromagnet provides 10kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it perfect for controllabl...

SKU: DF-DFR0550 | Brand: DFRobot

A 5-inch TFT capacitive touchscreen display with 800×480 resolution, designed for direct connection to Raspberry Pi 3B and 3B+ via the DSI interface. The display is powered directly from the Pi — no external power sup...

SKU: DF-DFR0491 | Brand: DFRobot

The Gravity IO Expansion Shield breaks out all GPIO pins from the LattePanda into Gravity-compatible 3-pin colour-coded connectors, providing plug-and-play access to hundreds of Gravity sensors and modules. Each pin i...

SKU: AF-481 | Brand: Adafruit

This chrome-plated metal pushbutton is built tough and looks great doing it. Simply drill a 16mm hole into any panel up to 12.7 mm thick, drop it in, and tighten the included nut — a rubber gasket keeps water out of y...

SKU: AF-1479 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in white LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger ...

SKU: AF-1459 | Brand: Adafruit

This inductive charging set provides wireless power transfer using a split-transformer design. The transmitter coil is powered with 9–12 V DC, and the receiver coil outputs 3.3 V DC — no direct wire connection between...

SKU: AF-3213 | Brand: Adafruit

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit ...

SKU: AF-3167 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flex...

SKU: AF-3166 | Brand: Adafruit

This silicone-insulated wire is exceptionally flexible and soft while remaining impressively tough — making it the go-to choice when standard PVC-covered wire can't keep up. Its silicone sheath handles extreme tempera...

SKU: DF-SEN0248 | Brand: DFRobot

DFRobot BME680 Environmental Sensor is a low power gas, pressure, temperature & humidity sensor based on BOSCH BME680 sensor. It is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatil...

SKU: DF-FIT0554 | Brand: DFRobot

The LiitoKala Lii-402 is a four-slot smart charger that supports Li-ion, Ni-MH, and LiFePO4 rechargeable batteries. It automatically identifies Li-ion and Ni-MH battery types, with manual mode selection for LiFePO4 an...

SKU: AF-3694 | Brand: Adafruit

These Banana Plugs not only look great, they're also solder-free and stackable! Banana plugs are often used on test equipment, tools, synthesizers and other electronic patch panels. Each connector is designed ...

SKU: AF-3709 | Brand: Adafruit

The Adafruit SGP30 is a multi-pixel MOX (metal-oxide) gas sensor from Sensirion that measures Total Volatile Organic Compounds (TVOC) and equivalent CO2 (eCO2) for indoor air quality monitoring. With fully calibrated ...

SKU: AF-3670 | Brand: Adafruit

High-conductive heating fabrics are Literally! This non-woven fabric feels a little like felted paper but is filled with conductive material that can make the fabric emit heat when powered. Resistive heating fabrics s...

SKU: TB-PH9203 | Brand: Little Bird

A single AA battery holder moulded in Delrin with corrosion-resistant nickel-plated springs and studs. It comes with 150 mm bare lead connection wires for easy integration into your projects. Specifications Cell Ty...

SKU: AF-1532 | Brand: Adafruit

This RF adapter bit is great for anyone doing RF work. If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to an SMA antenna, this dongle will do the trick!

SKU: AF-1503 | Brand: Adafruit

A clean, rounded 16mm panel-mount momentary pushbutton in burgundy. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control pane...

SKU: AF-1381 | Brand: Adafruit

This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can al...

SKU: AF-1570 | Brand: Adafruit

A compact 3.7 V lithium-ion polymer (LiPo) battery with approximately 100 mAh capacity (0.4 Wh). Thin, lightweight, and powerful, this cell is suited for small wearable projects, IoT devices, and compact electronics w...