New Arrivals

SKU: AF-3314 | Brand: Adafruit

This is a cute half-size breadboard with an assortment of small jumper wires, great for prototyping. Breadboard is 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on ...

SKU: AF-3417 | Brand: Adafruit

The FeatherWing Tripler lets you connect a Feather board to two FeatherWings side by side — no stacking headers needed. All three sets of pins are cross-connected, with dedicated GND and 3.3 V strips for easy power di...

SKU: DF-FIT0487 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses can reach up to 7*2*380...

SKU: SF-SEN-10128 | Brand: SparkFun

This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and w...

SKU: SF-COM-10001 | Brand: SparkFun

Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft. The knob slides onto the potentiometer and holds tightly with a strong frict...

SKU: AF-754 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these clear white LEDs, in fact we use them exclusively in our kits. They are very bright and have about 25 degree LED beam so they're good for illumination, head lamps...

SKU: DF-FIT0489-C | Brand: DFRobot

INTRODUCTION The turbo metal gear worm motor uses a metal gear box for durability and a high torque output. Due to the special mechanical structure of the worm drive the motor output shaft i...

SKU: SF-PRT-09925 | Brand: SparkFun

This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small Phillips head screw. Another bonus is the ON/OFF ...

SKU: AF-2269 | Brand: Adafruit

Interested in learning how Bluetooth Low Energy works down to the packet level? Debugging your own BLE hardware, and trying to spot where something is going wrong? Or maybe you're writing a custom application for y...

SKU: DF-DFR0399 | Brand: DFRobot

A compact DC micro metal gear motor with a built-in driver that uses the DFRobot Gravity 3-pin interface. Simply connect to a microcontroller and control direction and speed with a single PWM signal — no external H-br...

SKU: DF-DRI0040 | Brand: DFRobot

INTRODUCTION This is a ultra compact size Dual-H-Bridge dc motor driver (Based on HR8833), which could drive two way 1.5A DC brush motors up to 10V . It has the same footprint as your thumbn...

SKU: AF-3438 | Brand: Adafruit

Your cell phone charges off of USB, but can you really trust that charging station at the airport? Now you can control when to allow data in or out of your device with this little USB extension cable. You can plug ...

SKU: SF-SEN-09836 | Brand: SparkFun

This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital...

SKU: SF-PRT-09835 | Brand: SparkFun

This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector. The connector mates with the barrel jack on the Arduino (among a numbe...

SKU: SF-BOB-09822 | Brand: SparkFun

This is the newest revision and fixes issues with the last board. This breakout board pairs an SP3485 RS-485 transceiver with an FT232RL USB UART IC to convert a USB stream to RS-485. The SP3485 is a half-duplex tr...

SKU: DF-DRI0042 | Brand: DFRobot

The DFRobot DRI0042 is a compact, high-current DC motor driver capable of continuously driving a single motor at up to 15A (with heatsink) from a 12–36V supply. The onboard LM2575 regulator provides a 5V 500mA output ...

SKU: AF-3505 | Brand: Adafruit

The Adafruit Metro M0 Express brings 32-bit ARM power to the familiar Metro/UNO shield-compatible form factor. Powered by the ATSAMD21G18 ARM Cortex M0+ processor at 48 MHz, it offers 256 KB flash and 32 KB RAM — a ma...

SKU: DF-DRI0002 | Brand: DFRobot

A dual H-bridge DC motor controller based on the L298N driver chip, capable of driving two bi-directional DC motors at up to 2 A per channel. The module accepts a wide motor supply voltage of 4.8–46V and includes high...

SKU: AF-812 | Brand: Adafruit

Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal...

SKU: DF-DRI0001 | Brand: DFRobot

The DFRobot 2×1A DC Motor Shield uses the L293 motor driver chip to control two 7–12 V DC motors at up to 1 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using pins 4, 5, 6, and 7 for mot...