New Arrivals

SKU: AF-2056 | Brand: Adafruit

This is really the fanciest, best feeling knob we've ever seen. Using this knob sort of reminded us of driving along the Amalfi coast in a perfectly restored '65 Porsche - meaning we really, really liked ...

SKU: AF-2210 | Brand: Adafruit

The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire u...

SKU: AF-2220 | Brand: Adafruit

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins,...

SKU: AF-2280 | Brand: Adafruit

The Adafruit Pi Box Plus is a crystal-clear acrylic enclosure designed specifically for the Raspberry Pi Model A+. Six laser-cut pieces slide together and secure with four screws for a sturdy, professional-looking bui...

SKU: AF-2327 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo HAT adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution — c...

SKU: AF-2307 | Brand: Adafruit

This high-powered micro servo packs nearly double the stall torque of standard micro servos into a compact metal-geared package. With approximately 180° of rotation, it works with any standard servo library, driver, o...

SKU: AF-2340 | Brand: Adafruit

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...

SKU: AF-2379 | Brand: Adafruit

A USB-A to Micro-B power-only cable with a built-in inline on/off switch. Perfect for powering a Raspberry Pi or any Micro USB device from a USB power supply, with the convenience of a physical power switch — no need ...

SKU: AF-2407 | Brand: Adafruit

Its a mini panel-mountable HDMI monitor with a built-in touchscreen! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This ...

SKU: AF-2471 | Brand: Adafruit

The Adafruit HUZZAH ESP8266 Breakout is a breadboard-friendly WiFi microcontroller board built around the Espressif ESP8266. With an 80 MHz processor, full WiFi client and access point support, a built-in TCP/IP stack...

SKU: DF-DFR0106 | Brand: DFRobot

This fantastic light disc consists of 7 SMD RGB LED. It illustrates a beautiful color combination much better than traditional RGB led. You can control the LEDs via the RGB pins. By pulse-width-modulating the pins an...

SKU: DF-FIT0030 | Brand: DFRobot

These 23 cm (9″) female-to-female jumper wires are a prototyping essential. Use them to connect between male headers on Arduino boards, IO shields, sensors, and breadboards. Multiple wires sit neatly side by side on s...

SKU: DF-FIT0100 | Brand: DFRobot

A pack of 10 right-angle male header strips, each with 40 breakable pins at 2.54mm pitch. The 90° bend allows horizontal connections from vertically mounted PCBs, ideal for compact enclosures and edge-mounted connecto...

SKU: AF-1500 | Brand: Adafruit

The Adafruit Trinket 3V3 is a tiny microcontroller board built around the Atmel ATtiny85 processor. At just 27mm × 15mm, it's small enough to fit into virtually any project and affordable enough to dedicate to a singl...

SKU: DF-FIT0105 | Brand: DFRobot

A pack of 10 long straight male header strips, each with 40 breakable pins at 2.54mm pitch. The extended 10mm pin length allows socket-to-socket connections, and the plastic separator can be repositioned along the pin...

SKU: DF-DFR0116 | Brand: DFRobot

This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino. This programmer works ...

SKU: DF-FIT0522 | Brand: DFRobot

This is a metal geared DC motor w/Encoder. It is a 6V motor with a 75:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds ...

SKU: DF-FIT0127 | Brand: DFRobot

Standard 16x2 character LCD display. It has a basic 16 character by 2 line display with a blue background with white characters. You could get a compatible LCD pannel or IIC LCD backpack here. SPECIFICATIONS ...

SKU: DF-SEN0237-A | Brand: DFRobot

Measure dissolved oxygen in water for aquaculture, environmental monitoring, natural science projects and general water-quality work. This DFRobot Gravity kit pairs a galvanic dissolved oxygen probe with an analogue s...

SKU: DF-FIT0131 | Brand: DFRobot

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack. Plug a 9V battery into one end and connect the other to any device with an onboard barrel jack — ideal for powering Arduinos, development...