New Arrivals

SKU: AF-4294 | Brand: Adafruit

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!This is a 25 Pack of 1.0KΩ Resistors. More specifically, they are carbon film, through-hole ax...

SKU: SF-CAB-15425 | Brand: SparkFun

A USB 2.0 cable with a reversible USB-A plug on one end and USB-C on the other. The USB-A connector has been modified to insert in either orientation — just like USB-C — eliminating the usual trial-and-error of pluggi...

SKU: SF-PRT-15353 | Brand: SparkFun

Sometimes we want our projects on, but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while only consuming minimal power (approximately 35nA) and turn your project...

SKU: SF-SEN-15289 | Brand: SparkFun

The SparkFun gator:microphone is a micro:bit Accessory Board that integrates an electret microphone into SparkFun's gator:bit series of gator-clippable accessories, enabling it to be easily interfaced with the micro:b...

SKU: AF-4311 | Brand: Adafruit

A vibrant 2.0" IPS TFT display breakout with 320×240 resolution and full-colour output, driven by the ST7789 controller. The IPS panel delivers vivid colour reproduction and wide viewing angles — a significant upgrade...

SKU: YH-6000200150 | Brand: Little Bird

The Spin:bit kit combines 265 building blocks with a motorised drive and the Super:bit expansion board to create programmable mechanical models. Build a Ferris wheel, gyroscope, fan, or your own custom creations — all...

SKU: SF-SEN-15269 | Brand: SparkFun

The SparkFun gator:environment is a micro:bit accessory board that combines the CCS811 gas sensor and BME280 atmospheric sensor for comprehensive environmental monitoring. It measures barometric pressure, humidity, te...

SKU: TR-ANGLEBIT | Brand: 4tronix

The Angle:Bit is a compact adaptor that changes the orientation of your BBC micro:bit from horizontal to vertical, or vice versa. The edge connector is wired so you can insert the micro:bit either way round, letting y...

SKU: SF-COM-15350 | Brand: SparkFun

If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.5W, 8Ohm speaker is only 40mm in diameter and just over 4mm thick, the same kind you might find in o...

SKU: SF-PRT-15306 | Brand: SparkFun

A translucent keycap designed for Cherry MX switches, perfect for custom keyboards and input devices. The clear body lets LED backlighting shine through beautifully, while still providing a smooth, professional finish...

SKU: AF-4211 | Brand: Adafruit

If you need to add a panel-mount connection for USB Mini B, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. I...

SKU: AF-4219 | Brand: Adafruit

This 75mm slide potentiometer is a linear 10KΩ pot with a smooth, satisfying action and an included grippy plastic knob with a white position marker. Use it as a voltage divider, input control, or anywhere you need a ...

SKU: EC-SES14002KA | Brand: Elecrow

CrowPi is an educational tool based on Raspberry Pi, designed to help people learn electronics, programming, and basic computer science. CrowPi was first released on Kickstarter in May 2018 and won a very successfu...

SKU: AF-4150 | Brand: Adafruit

In this world nothing can be said to be certain, except we need headers, headers, and more headers!Each pack contains ten blue 36-pin 0.1" pitch break-away male headers.  These are a little extra special in that ...

SKU: EF-EF04013 | Brand: ElecFreaks

The Octopus Crash Sensor Brick is a simple collision detection module based on a momentary crash switch. When physical contact is made, the switch triggers a digital signal — making it ideal for bump detection in robo...

SKU: FT-OLSH | Brand: Freetronics

Connect the 128x128 pixel OLED module to your Arduino-compatible board for a tiny, handy display with a joystick input and piezo sound output! The module can be plugged in directly on top of the shield, or connecte...

SKU: SF-SEN-14607 | Brand: SparkFun

Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array, meaning you have a square array of 64 pixels capable of independent temperature detec...

SKU: DF-FIT0577 | Brand: DFRobot

This DC gearmotor are now in the status of Pre-order and will ship in the end of Jun. This DC gearmotor has an integrated M3*20mm threaded rod as its output shaft, turn it into a linear actuator. 6V rated voltage...

SKU: DF-FIT0565 | Brand: DFRobot

This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft facilitates the installation of motor. The no-load speed is...

SKU: AF-2821 | Brand: Adafruit

The Feather HUZZAH ESP8266 is an all-in-one Wi-Fi development board with built-in USB and battery charging. Powered by the ESP8266 with a full Wi-Fi stack, it's a compact and affordable way to add Internet connectivit...