New Arrivals

SKU: AF-4055 | Brand: Adafruit

This snap-in panel mount USB A extension cable lets you run a USB port through an enclosure wall without screws or drilling mounting holes. Cut a rectangular opening in your panel, snap the connector in, and the integ...

SKU: EF-EF04024 | Brand: ElecFreaks

This is a Rain/steam sensor from ElecFreaks. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up.You even co...

SKU: FT-HUMID | Brand: Freetronics

Measure temperature and relative humidity with this simple, Arduino-compatible sensor module based on the DHT22. With just three connections (GND, power, and data), you can read both temperature and humidity from a si...

SKU: ET-RP007 | Brand: Little Bird

Description: This 2M HDMI Cable is perfect to plugging you Raspberry Pi into your HDMI enabled monitor or television.  Dimensions:   Connector Type A: HDMI Plug  Connector Type B: HDMI Plug ...

SKU: LB-CTCBOX | Brand: Little Bird

Already run the Crack the Code unit of work and want to replenish your component box? At Little Bird Electronics we have put together a replenishment kit for your Crack the Code unit of work.   Kit Contains: ...

SKU: DF-FIT0576 | Brand: DFRobot

This is a soft thin protoboard with hole diameter of 1mm, hole spacing of 2.54mm. It can be soldered DIP and SMD components, and the thickness is only 0.4mm. The proto board can be appropriate bending in any directio...

SKU: DF-FIT0585 | Brand: DFRobot

  INTRODUCTION   This product is high temperature resistant silicone rubber copper wire with 18AWG and 0.75mm2. It is made of fine tin-plated copper material and not easily oxidized. It adopts th...

SKU: DF-FIT0523 | Brand: DFRobot

This is a high-quality copper coupling for connecting wheels and motors to facilitate the user to build a robot or small mobile platform motion system. The coupling is fully CNC machined with solid workmanship and...

SKU: DF-DFR0568 | Brand: DFRobot

This compact DC-DC buck-boost converter automatically steps voltage up or down to deliver a stable 3.3 V output from a wide 2.5–15 V input range. With a maximum output current of 600 mA and ultra-low 180 µA quiescent ...

SKU: SF-PRT-14671 | Brand: SparkFun

You asked for more wires, so you are going to get more wires! This is a large kit of jumper wires - cut, stripped, and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG ...

SKU: AF-2787 | Brand: Adafruit

A pack of 25 through-hole 100 kΩ resistors — an essential component for voltage dividers, pull-up/pull-down circuits, and general electronics projects. The 0.4 mm lead diameter fits standard solderless breadboards per...

SKU: SF-PRT-15187 | Brand: SparkFun

These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of he...

SKU: SF-CAB-15186 | Brand: SparkFun

A 10-pack of cables with an alligator clip on one end and a female header on the other. These cables bridge the gap between clip-based prototyping and standard 0.1" pin headers, making it easy to connect alligator cli...

SKU: SF-COM-14884 | Brand: SparkFun

A general-purpose 1N4004 rectifier diode in a subminiature axial-lead package. Rated for 1 A forward current and 400 V reverse voltage, this diode is commonly used for reverse voltage protection, power rectification, ...

SKU: AF-3093 | Brand: Adafruit

The Adafruit CRICKIT for Circuit Playground Express is a robotics and electronics driver board that bolts directly onto a Circuit Playground Express. It adds motor drivers, servo outputs, capacitive touch inputs, NeoP...

SKU: SF-CAB-14911 | Brand: SparkFun

This 1-metre interface cable converts between N-type and RP-SMA connectors, making it ideal for connecting larger LoRa antennas (such as 915MHz antennas with N-type connectors) to devices with RP-SMA ports. The RG316 ...

SKU: AF-3845 | Brand: Adafruit

This 3×4 matrix keypad provides 12 buttons (0–9, *, #) in a sturdy, rigid format. It uses a matrix scanning arrangement requiring only 7 pins to read all 12 keys, making it efficient to connect to Arduino, Raspberry P...

SKU: LB-SHAKEUP-CLASSROOM | Brand: Little Bird

Due to popular demand we've created our ShakeUp Classroom pack!The ShakeUp makes you a STEAM inventor by helping you to connect everyday objects to your computer. If you can plug in a Keyboard and Mouse, you can use t...

SKU: AF-3791 | Brand: Adafruit

The Adjustable PCB Clamp Holder from Pro's Kit is designed for larger, heavier PCB soldering and desoldering. But it works great for small boards too and is very easy to adjust. A great choice for any workbench if ...

SKU: AF-2141 | Brand: Adafruit

A compact 8-pin screw terminal block with 2.54mm (0.1") pitch, designed to fit directly into perfboard and protoboards. Terminal blocks provide reliable, tool-adjustable PCB-to-wire connections that are easy to mainta...