New Arrivals

SKU: AF-1882 | Brand: Adafruit

Silicone-sheathing wire is super-flexible and soft, and its also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible...

SKU: AF-1759 | Brand: Adafruit

Mod your stuffed toy to chirp, meow, or woof! This GEMMA parts pack makes it easy to add simple sounds to any plush toy, and especially the Sew-Your-Own Owl Kit (not included!) A tilt ball switch is used to trigger...

SKU: AF-1586 | Brand: Adafruit

Round and round they go! 24 ultra-bright smart RGB NeoPixels are arranged in a circle with a 66 mm (2.6″) outer diameter — the largest in the NeoPixel Ring family. Each LED is individually addressable from a single mi...

SKU: AF-1487 | Brand: Adafruit

Put on your sunglasses before wiring up this LED matrix — 64 eye-blistering RGB LEDs adorn the NeoPixel NeoMatrix for a blast of configurable colour. Arranged in an 8×8 matrix, each pixel is individually addressable w...

SKU: AF-1793 | Brand: Adafruit

Need some really bright LEDs? We are big fans of these 5mm clear UV / Purple LEDs. These emit UV 'blacklight' in the UVA spectrum so they are great for projects with fluorescent materials referred to as UV/blacklight-...

SKU: AF-1833 | Brand: Adafruit

This breakout board gives you easy access to all 5 pins of a USB Micro-B connector via standard 0.1" header pins. It's a simple way to add USB 5V power to a project, interface with a USB-capable microcontroller, or pr...

SKU: AF-2094 | Brand: Adafruit

This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable.  It's helpful for using products like the JTAGulator or SEGGER J-...

SKU: AF-1872 | Brand: Adafruit

This 8 MHz ceramic resonator is a breadboard-friendly oscillator with built-in load capacitors, making it a simple drop-in timing source for microcontrollers. With 0.5% accuracy, it's well suited for everyday electron...

SKU: AF-2075 | Brand: Adafruit

If you've started designing your own PCBs in Eagle or KiCad and want to make your PCB a reality, you may end up with a CNC mill that can route out PCBs by cutting away the copper trace outlin...

SKU: AF-2190 | Brand: Adafruit

The VERTER is a buck-boost DC-DC converter that accepts 3–12 V input and outputs a stable 5.2 V — ideal for powering Arduino, Raspberry Pi, and other 5 V electronics from a wide variety of battery packs. The slightly ...

SKU: AF-2200 | Brand: Adafruit

How good is your multimeter really?  Or maybe your analog converter needs a good reference? Or lets say you want to test your microcontroller's conversion accuracy & precision. If only you had a dependable, high ...

SKU: AF-2197 | Brand: Adafruit

This flat HDMI 1.4 cable connects two full-size HDMI devices together in a slim, flexible form factor. At just 30 cm (1 foot) long, it's ideal for tight installations where a standard round cable would be too bulky. ...

SKU: AF-2218 | Brand: Adafruit

The TFP401 breakout is a compact HDMI/DVI decoder that outputs raw 24-bit colour pixel data to 40-pin TTL displays. It decodes unencrypted video at any resolution from 25–165 MHz pixel clock (up to 1080p) and includes...

SKU: AF-2175 | Brand: Adafruit

Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a flat finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The flat bezel si...

SKU: AF-2225 | Brand: Adafruit

This is just a standard USB-A jack.  It's a sturdy metal with 4 pins in the back and 2 small mounting tabs that make it easy to use in your next USB projectWe use this USB-A jack for everything, really. With a li...

SKU: AF-2262 | Brand: Adafruit

The Adafruit GPIO Reference Card makes it easy to identify and connect wires to the Raspberry Pi's GPIO header. This ultra-thin (0.8 mm) card slides directly onto the 2×13 GPIO header, labelling each pin by function —...

SKU: AF-2102 | Brand: Adafruit

This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre ...

SKU: AF-2354 | Brand: Adafruit

This 7.0" TFT display packs 800×480 pixels with an LED backlight and a 4-wire resistive touchscreen overlay. With 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins), it's ideal fo...

SKU: DF-FIT0003 | Brand: DFRobot

This wheel is used in our most popular A4WD Mobile Platform and 2WD Arduino Mobile Robot Platform. Mounted directly on micro gear motors. Sold in pair. SPECIFICATIONS Outer Diameter: 65mm(2.6''...

SKU: DF-DFR0105 | Brand: DFRobot

Most project of Arduino may need more than two voltage supply. When feed with from 4.5-35V, this arduino power shield able to provide a voltage range from 1.25-12V with 3A peak current. Ideal for servo control and ot...