New Arrivals

SKU: DF-TEL0155 | Brand: DFRobot

A 3-metre single-mode duplex fibre optic patch cable with SC connectors on both ends. The cable uses 9/125µm (G652D) single-mode fibre with ceramic ferrules and PBT protective shells, delivering low insertion loss and...

SKU: DF-DFR0895 | Brand: DFRobot

The ESP32-S3-DevKitC-1 is an entry-level development board built around the ESP32-S3-WROOM-1 module, featuring integrated Wi-Fi and Bluetooth LE connectivity. The Xtensa dual-core LX7 processor provides hardware accel...

SKU: DF-SER0062 | Brand: DFRobot

A high-torque brushless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide exceptional durability, while IP67-rated waterproofing — achieved throug...

SKU: AF-5497 | Brand: Adafruit

We now have a handy extension cord for JST-XH projects! One end has a JST-XH socket, and the other has a matching plug. Between the two, 500mm of color-coded wire. This solid 2.5mm pitch connector exten...

SKU: DF-DFR0937 | Brand: DFRobot

This wireless LED lamp pack uses magnetic resonance coupling technology to power 10 LEDs without any wires or batteries. A transmitting coil creates a non-radiative magnetic field that wirelessly transfers energy thro...

SKU: AF-5532 | Brand: Adafruit

Have you found yourself in a maze of twisty-turny knobs, all alike? These micro potentiometer (or rotary encoder) knobs offer a rainbow burst of color to your synth or control panel. They are made of a hard plast...

SKU: AF-5529 | Brand: Adafruit

This Anodised Aluminium Machined Knob in blue is a premium upgrade for any rotary encoder or potentiometer. Solid machined aluminium with knurled sides for a secure grip and a shiny anodised finish that looks right at...

SKU: SF-WRL-19956 | Brand: SparkFun

The ALFA Network AHPI7292S is the world's first WiFi HaLow (802.11ah) HAT for Raspberry Pi. Similar to LoRa, WiFi HaLow operates in the sub-gigahertz 915MHz band, providing long-range, low-power wireless communication...

SKU: AF-5454 | Brand: Adafruit

For projects that need a rotary encoder but need to keep it single-sided or need to avoid interrupting traces or devices on the other side, here's an all-SMT rotary encoder! It's a high-quality 30-detents encoder f...

SKU: SF-SEN-19512 | Brand: SparkFun

The Arducam Camera Module V3 delivers 16MP autofocus imaging for Raspberry Pi projects, powered by the Sony IMX519 sensor. With twice the resolution of the V2 camera module, it's an affordable yet high-performance opt...

SKU: JU-R-E185 | Brand: Jubly-Umph

When the going gets tough, it can be really hard to remember that you're tough too. When you've come too far to give up now, this little lapel pin will be there to remind to keep your head down, and keep charging. ...

SKU: SF-SEN-19096 | Brand: SparkFun

The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The ga...

SKU: AF-5410 | Brand: Adafruit

Have you ever seen a tactile button do a headstand? This little clicky button is like a circus (circuit circus?) performer, contorting itself so its legs stick up instead of down the way most are. We think these could...

SKU: WS-21743 | Brand: Waveshare

WAVEGO, 12-DOF bionic dog-like robot, open source for ESP32 and PI4B, facial recognition, color tracking, motion detectionHigh-DOF bionic quadruped robotPowered by ESP32 sub controller & Raspberry Pi 4B host controlle...

SKU: JU-R-E97 | Brand: Jubly-Umph

You understand the 'slings and arrows of outrageous fortune', that's why we made this lapel pin: As a little reminder that the slings and arrows are the point of the whole thing. This pin is for those who've run out o...

SKU: JU-R-E86 | Brand: Jubly-Umph

Not all battles are loud, violent and gory. Some are quiet, intense, and invisible. People frequently forget that sometimes the most difficult struggles are internal, so here's a lapel pin for those whose struggle ...

SKU: WS-21797 | Brand: Waveshare

OV9281-120 mono Camera for Raspberry Pi, Global Shutter, 1MPOV9281-120 mono camera1MP, Global Shutter, 110°FOV Compatible with Raspberry Pi series boardsDevice Support Raspberry Pi series Supports 4B / 3B+ ...

SKU: DF-FIT0892 | Brand: DFRobot

A compact 720p USB camera module with a 140-degree wide-angle lens. Using the standard UVC protocol, it's plug-and-play on Raspberry Pi, NVIDIA Jetson Nano, and any system supporting USB Video Class — no driver instal...

SKU: DF-SEN0522 | Brand: DFRobot

This human body sensing switch adopts an infrared detection way to control load switch. It offers a detection range of 5~8m, high sensitivity, and reliability. The sensor has an adjustable delay function and the ...

SKU: DF-SEN0465 | Brand: DFRobot

This is a sensor that detects oxygen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ox...