New Arrivals

SKU: LB-LS1177 | Brand: Little Bird

Laser Detector Module Want to set up your own laser tripwire? These little modules make it super simple. Just hook one up to your Arduino, line it up with a laser pointer, and you’ve got a working laser detection syst...

SKU: DF-DFR1211 | Brand: DFRobot

Introduction The Raspberry Pi Compute Module 5 IO Board (CM5IO) is a powerful development platform designed to integrate the Compute Module 5 (CM5) into industrial and embedded applications. Offering extensive connect...

SKU: DF-FIT1014 | Brand: DFRobot

The official Raspberry Pi IO Case is a two-piece sheet metal enclosure for the Compute Module 5 and CM5 IO Board. It provides space for accessories such as an M.2 SSD or PoE+ HAT+, includes slots for CSI-2 cameras and...

SKU: DF-DFR1114 | Brand: DFRobot

The Gravity N20 is a compact all-metal gear motor with an integrated drive chip that simplifies motor control to a single PWM signal. Operating on 3–6 V, it uses a PPM servo-style control method — forward, stop, and r...

SKU: DF-DFR1084 | Brand: DFRobot

The Arduino UNO R4 WiFi is the latest evolution of the iconic UNO series, powered by the Renesas RA4M1 (Arm Cortex-M4) processor running at 48 MHz — a 3× speed increase over the UNO R3. With 256 KB flash, 32 KB SRAM, ...

SKU: AF-6109 | Brand: Adafruit

The Adafruit A4988 Stepper Motor Driver Breakout simplifies stepper motor control down to just two pins — a direction pin and a step pin. Each pulse on the step pin advances the motor by one step or microstep, making ...

SKU: AF-6103 | Brand: Adafruit

A compact 60mm USB-powered cooling fan that provides instant airflow for electronics projects. Simply plug into any USB port for immediate cooling — no drivers or setup required. The USB connector can be cut off to w...

SKU: AF-5912 | Brand: Adafruit

The Adafruit SHT41 Trinkey is a tiny USB A device that combines an ATSAMD21 microcontroller with a Sensirion SHT41 temperature and humidity sensor. Simply plug it into any USB A port on your computer and start reading...

SKU: DF-DFR0994 | Brand: DFRobot

Romeo ESP32-S3 is a high-performance development board specifically designed forrobotics projects. It utilizes the ESP32-S3 microcontroller and is equipped with an onboard camera that enables video transmission and...

SKU: AF-5663 | Brand: Adafruit

Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel I2C Multiplexer lets you connect up to four same-address I2C devices to a single microcontroller by acting as a gatekeeper — write a ...

SKU: DF-SEN0487 | Brand: DFRobot

This tiny MEMS microphone has an amplifier gain of 66. When there is no sound detected, it outputs voltage around 0.66*VCC. When speaking, you can easily get the acoustic waveform by ADC sampling. The module can be us...

SKU: DF-DFR0914 | Brand: DFRobot

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 5V, making it easy to interface industrial sensors and PLC outputs with Arduino and other 5V microcontrollers. Each channel fe...

SKU: AF-4411 | Brand: Adafruit

A compact NEMA-8 bipolar stepper motor with the same 1.8° step angle (200 steps/revolution) as full-size NEMA-17 motors, but in a much smaller 20 × 30 mm package. Ideal for compact CNC builds, small robotics, and spac...

SKU: DF-SEN0492 | Brand: DFRobot

This laser range sensor can be used to detect objects in 4~400cm with ±2cm accuracy. With 3 measurement modes supported, it is well applicable to various detection scenarios like security gate detection, access contro...

SKU: AF-4886 | Brand: Adafruit

The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LE...

SKU: DF-MBT0034 | Brand: DFRobot

The Environment Science Expansion Board V2.0 is a micro:bit add-on designed for STEAM education, integrating 14 environmental sensors and modules onto a single tree-shaped board. Students can measure UV levels, temper...

SKU: AF-4700 | Brand: Adafruit

A compact DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 600mA, making it easy to run from the same supply as your DC motors or servos. The pump su...

SKU: AF-4739 | Brand: Adafruit

This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 5V output with up to 1.2A current. It's great for supplying power to popular 5V voltage circuits from a range of b...

SKU: DF-SEN0340 | Brand: DFRobot

SPECIFICATION Distance Resolution: 1cm Frequency: 100Hz Ambient Light Resistance: 70klux Detecting Range: 0.2~8m Weight: ＜5g FoV: 2° Supply Voltage: 5V±0.1V Data Interface: UART/ I²C Accuracy: ±6cm@(0.2m-3m) DOCUMENTS...

SKU: AF-4314 | Brand: Adafruit

The Adafruit ATECC608 Breakout provides hardware-based cryptographic security for your microcontroller projects. This crypto-authentication chip from Microchip stores private keys securely — once locked, the keys cann...