New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Pimoroni Mini Black HAT Hack3r - Fully Assembled
SKU: AF-3182 | Brand: Adafruit
The Pimoroni Mini Black HAT Hack3r breaks out all 40 GPIO pins from your Raspberry Pi while still allowing a HAT or pHAT to sit on top. Connect via the included ribbon cable and access every pin — labelled with functi...
Delivered by Fri 11 Sep
SparkFun Large Digit Driver
SKU: SF-WIG-13279 | Brand: SparkFun
The SparkFun Large Digit Driver is a chainable controller board that solders directly to the back of 6.5" 7-segment LED displays. It uses the TPIC6C596 shift register IC to drive individual segments, making it easy to...
Delivered by Mon 31 Aug
MiniQ 4WD Cross Country Arduino Mobile Robot
SKU: DF-ROB0111 | Brand: DFRobot
The MiniQ 4WD Cross Country is a compact, fully assembled Arduino-compatible mobile robot designed for education and learning. Built around an ATmega32U4 (Arduino Leonardo) controller, it features 4-wheel drive with h...
Delivered by Mon 31 Aug
Adafruit MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout
SKU: AF-3199 | Brand: Adafruit
The Adafruit MiCS-5524 Gas Sensor Breakout is a robust MEMS sensor from SGX Sensortech for detecting carbon monoxide, natural gas leaks, alcohol, and volatile organic compounds (VOCs). It provides a simple analogue vo...
Delivered by Fri 11 Sep
Rotary Encoder - 1024 P/R (Quadrature)
SKU: SF-COM-11102 | Brand: SparkFun
This 1024 pulse per rotation rotary encoder outputs gray code which you can interpret using a microcontroller and find out which direction the shaft is turning and by how much. This allows you to add feedback to motor...
Delivered by Mon 31 Aug
Relay SPDT Sealed - 20A
SKU: SF-COM-10924 | Brand: SparkFun
These are massive single pole - double throw (SPDT) sealed relays. This means that when current is applied to the coil it throws a simple changeover switch, terminating the connection from the NC contact to ground and...
Delivered by Mon 31 Aug
Micro DC Geared Motor 6V 96RPM
SKU: DF-FIT0419 | Brand: DFRobot
INTRODUCTION This is a new micro DC geared motor, using planetary gear mechanism, applicable to the various types of DIY project. Especially the project which has a certain requirements for ...
Delivered by Mon 31 Aug
Infrared Proximity Sensor Short Range - Sharp GP2Y0A41SK0F
SKU: SF-SEN-12728 | Brand: SparkFun
Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Termina...
Delivered by Thu 20 Aug
Gravity: Arduino Digital Microwave Sensor (Motion Detection)
SKU: DF-SEN0192 | Brand: DFRobot
INTRODUCTION The microwave sensor applies the Doppler effect to detect moving objects using microwaves. This differs from the method used by a regular infrared (IR) sensor as microwave is...
Delivered by Mon 31 Aug
SparkFun Real Time Clock Module
SKU: SF-BOB-12708 | Brand: SparkFun
This is the SparkFun Real Time Clock (RTC) Module, this little breakout that uses the DS1307 to keep track of the current year, month, day as well as the current time. The module comes fully assembled and includes a s...
Delivered by Thu 20 Aug
Servo - Generic Continuous Rotation (Micro Size)
SKU: SF-ROB-10189 | Brand: SparkFun
Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power...
Delivered by Mon 31 Aug
Bluno Beetle Shield
SKU: DF-DFR0356 | Brand: DFRobot
INTRODUCTION The Bluno Beetle Shield expands the Beetle's single analog and digital I/O pins to the 3 pin "gravity" interface, giving more power and ground connections and making it easier to attach gravity inter...
Delivered by Thu 20 Aug
RPLIDAR A2 - 360 Degree Laser Scanner Development Kit
SKU: DF-DFR0445 | Brand: DFRobot
RPLIDAR A2 is the next generation low cost 360 degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. It can take up to 4000 samples of laser ranging per second with high rotation speed. And equipped with S...
Delivered by Mon 31 Aug
SparkFun USB Mini-B Breakout
SKU: SF-BOB-09966 | Brand: SparkFun
A simple breakout board for the USB Mini-B connector, bringing all 5 pins out to a breadboard-friendly 0.1" pitch header. Useful for prototyping USB connections or as a convenient 5V power source (up to 100 mA, unregu...
Delivered by Mon 31 Aug
SparkFun OpAmp Breakout - LMV358
SKU: SF-BOB-09816 | Brand: SparkFun
This is a simple 5V Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandw...
Delivered by Mon 31 Aug
URM04 Ultrasonic Sensor (RS485)
SKU: DF-SEN0002 | Brand: DFRobot
The URM04 Ultrasonic sensor is developed based upon our popular URM37 ultrasonic sensor, it is using RS485 interface which allows multiple sensors to be used simultaneously . The RS485 interface allows a number of...
Delivered by Thu 20 Aug
Gravity: 9 Pcs Sensor Set for Arduino
SKU: DF-DFR0018 | Brand: DFRobot
This is DFRobot's basic sensor set for arduino. Set includes light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, tilt sensor, big button, LED lighting module and Grayscale sensor. ...
Delivered by Mon 31 Aug
Optical Dust Sensor - GP2Y1010AU0F
SKU: SF-COM-09689 | Brand: SparkFun
Sharp’s GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflecte...
Delivered by Mon 31 Aug
Gravity: 360 Degree Hall Angle Sensor
SKU: DF-SEN0221 | Brand: DFRobot
The Hall Angle Sensor is a miniature 360 degree sensor which works based on the principle of the Hall effect. It is compatible with the DFRobot Gravity sensor interface, and works with a 5V DC power supply. The ...
Delivered by Mon 31 Aug
Gravity: 80cm Arduino Infrared Proximity Sensor
SKU: DF-SEN0019 | Brand: DFRobot
This is an Arduino infrared distance sensor. It has an adjustable detection range, 3cm - 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line,...
Delivered by Mon 31 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
