New Arrivals

SKU: AF-6217 | Brand: Adafruit

A warm-white LED filament shaped as the letter "Z", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6096 | Brand: Adafruit

A lightning bolt-shaped COB (Chip-on-Board) LED filament that produces a warm, uniform glow similar to classic Edison-style LED bulbs. Dozens of micro LED diodes are bonded to a rigid metal backing and coated in silic...

SKU: AF-6095 | Brand: Adafruit

This skull-shaped LED filament uses COB (Chip-on-Board) technology — dozens of micro LED diodes bonded to a rigid metal backing and coated in silicone — to produce a warm, uniform glow similar to Edison-style LED bulb...

SKU: AF-6094 | Brand: Adafruit

COB LED Unicorn – A Miniature Magical LightThis glowing unicorn is crafted from COB (Chip-on-Board) LEDs, the same technology found in Edison-style LED bulbs, arranged in a whimsical design to create a bright, warm, a...

SKU: DF-FIT0796 | Brand: DFRobot

A pack of four coreless micro motors sized 8.5×20mm, designed for DIY drone builds and lightweight RC projects. These high-speed motors deliver 46,000 RPM from a compact form factor, making them well-suited for quadco...

SKU: DF-FIT0812 | Brand: DFRobot

A flexible LED filament chip that emits warm 2200K light in a full 360° pattern. At 260mm long and just 2mm in diameter, the filament can be bent and folded into any shape, making it perfect for DIY lighting decoratio...

SKU: KI-5636 | Brand: Kitronik

This RTC & Klimate board is a Real Time Clock (RTC) and environmental sensor (BME280) interface for the BBC microbit. The environmental sensor will give the ability to measure temperature, barometric pressure an...

SKU: DF-FIT0419 | Brand: DFRobot

INTRODUCTION This is a new micro DC geared motor, using planetary gear mechanism, applicable to the various types of DIY project. Especially the project which has a certain requirements for ...

SKU: LB-PMMA19004A001 | Brand: Little Bird

A compact 370 DC diaphragm pump designed for automated plant watering systems and other fluid transfer applications. With a wide operating voltage range of 3–24V, it's easy to integrate with Arduino and other microcon...

SKU: PL-2265 | Brand: Pololu

This tiny DC motor has a shaft with an offset mass that vibrates when it rotates. Motors like this are commonly found in cell phones and other devices that use vibration for tactile feedback. The motor has 1.5″ lea...

SKU: CB-0799439675339 | Brand: Chibitronics

A MegaPack of 30 Chibitronics circuit stickers — peel-and-stick LED stickers that bring paper circuits to life. Simply stick them onto copper tape, connect a coin cell battery, and watch them light up. No soldering re...

SKU: AF-4547 | Brand: Adafruit

A small submersible DC water pump for fountains, plant-watering systems, and other beginner projects. The pump draws water in from the side of the plastic casing and pushes it out through the tubing port. It runs on 3...

SKU: KI-2271 | Brand: Kitronik

A compact 2×AAA battery cage with a JST PH connector and 145 mm colour-coded leads. Designed to plug directly into the BBC micro:bit's battery socket, providing a portable power source for classroom projects and weara...

SKU: DF-FIT0794 | Brand: DFRobot

A pack of four coreless micro motors measuring 7 × 20 mm, reaching 50,000 RPM at 3.7V. The largest and most powerful in the coreless micro motor range, these draw 120 mA and feature a 1 mm shaft — delivering the most ...

SKU: KI-2715 | Brand: Kitronik

A starter kit for e-textiles and wearable electronics from Kitronik's Electro-Fashion range. This Discovery Pack includes a curated selection of sewable components — LEDs, switches, coin cell holders, conductive threa...

SKU: PI-TEK004 | Brand: Pimoroni

A four pack of sewable, heart-shaped bright pink LEDs. The voltage (and hence current) supplied from LIR2032 rechargeable coin cell batteries may damage the Teknikio LED boards, so please ONLY USE CR...

SKU: SF-ROB-10846 | Brand: SparkFun

This NEMA 17 bipolar stepper motor delivers 68 oz·in (48 N·cm) of holding torque with a fine 0.9° step angle, providing 400 steps per revolution for high-precision positioning. Its 5mm D-shaft and standard NEMA 17 mou...

SKU: PI-TEK005 | Brand: Pimoroni

Two diamond-shaped, sewable LED boards that are colour-changeable! They can be connected to light up in red, blue, green, or any combination of those colours! The voltage (and hence current) supplied from&nbsp...

SKU: PI-COM1900 | Brand: Pimoroni

A sewable coin cell battery holder designed for wearable electronics projects. The metal tabs have small 1mm holes that accommodate a #5 or smaller needle, making it easy to sew directly onto fabric with conductive th...

SKU: LB-EAGLED | Brand: Little Bird

EagLED is Little Bird's wearable development kit — a complete Arduino-compatible microcontroller on a snappable board with built-in LEDs, a light sensor, push button, and battery holder. Snap apart the components, sew...