New Arrivals

SKU: PI-COM1700 | Brand: Pimoroni

The AM2320 is a digital temperature and humidity sensor with an I2C interface. Its straightforward I2C communication makes it easy to connect to any Raspberry Pi or Arduino, and it works alongside other I2C sensors an...

SKU: PL-2490 | Brand: Pololu

This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53L0X uses time-of-flight measurements of infrared pulses for rangi...

SKU: DF-SEN0097 | Brand: DFRobot

This is a BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations. This is a more acurate and easier ...

SKU: DF-DFR0164 | Brand: DFRobot

This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The 8U2 firmware uses the standard USB COM drivers, and no ...

SKU: AF-444 | Brand: Adafruit

Add a tiny joystick to your project with this PSP thumbstick. This is a replacement component for PSP1000's, but we think they'd make for a great little joystick/thumbstick add-on for a wearable, or portable pro...

SKU: AF-1897 | Brand: Adafruit

The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no pa...

SKU: AF-3420 | Brand: Adafruit

The PaPiRus Screen HAT from Pi Supply is an ePaper / eInk screen HAT designed for the Raspberry Pi. Think of it as the older sibling of the PaPiRus Zero.ePaper / eInk is a display technology that mimics the appearance...

SKU: PL-2126 | Brand: Pololu

A breakout board for ST's LPS331AP digital barometric pressure sensor. This sensor measures absolute pressure from 260 to 1260 mbar with excellent accuracy (±2 mbar), making it ideal for altitude estimation, weather m...

SKU: PL-1317 | Brand: Pololu

This compact USB-to-serial adapter lets you easily connect TTL serial devices to a computer, where it appears as a virtual COM port. The board is a Micro-USB carrier for the Silicon Labs CP2102N USB-to-UART bridge, pr...

SKU: EF-EF04061 | Brand: ElecFreaks

A linear sliding potentiometer module from the ElecFreaks Octopus series. Provides an analogue voltage output proportional to the slider position, making it useful as a variable input for controlling volume, brightnes...

SKU: AF-3515 | Brand: Adafruit

The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...

SKU: AF-931 | Brand: Adafruit

A compact 0.96" (24.4 mm diagonal) monochrome OLED graphic display with 128 × 32 pixel resolution. Driven by the SSD1306 controller over I2C, each white OLED pixel is individually addressable, producing high-contrast,...

SKU: PI-COM0205 | Brand: Pimoroni

The MCP3008 is a 10-bit analogue-to-digital converter with eight single-ended input channels, communicating via SPI. It's a popular choice for adding analogue inputs to the Raspberry Pi and other digital-only boards —...

SKU: LB-00255 | Brand: Little Bird

An 8-channel voltage level converter module for shifting between 3.3V and 5V logic levels. Designed for use with Raspberry Pi, making it easy to interface with 5V sensors and modules from the Pi's 3.3V GPIO pins. Key...

SKU: SF-ROB-10507 | Brand: SparkFun

The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 1Amps. The board is capable o...

SKU: SF-COM-08236 | Brand: SparkFun

This is a fully assembled simple breakout board for the surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down sel...

SKU: SF-BOB-09719 | Brand: SparkFun

A breadboard-friendly breakout board for the Analog Devices AD5330 8-bit parallel digital-to-analogue converter (DAC). All necessary pins are broken out to 2.54 mm (0.1″) spaced headers. The board includes a decouplin...

SKU: AF-1712 | Brand: Adafruit

A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c ...

SKU: AF-2542 | Brand: Adafruit

The Adafruit FONA 808 combines 2G cellular connectivity with integrated GPS tracking in a compact 1.75 × 1.6-inch breakout. Built around the SIM808 module with an MT3337 GPS chipset, it provides voice calling, SMS, GP...

SKU: DF-DFR0117 | Brand: DFRobot

Arduino has a small amount of data storage space, The Arduino UNO has 32k. It doesn't have enough space if you want to store a lot of data. Therefore, we need to add an EEPROM Data Storage Module to increase its stora...