New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Adafruit HDC3021 Precision Temperature & Humidity Sensor
SKU: AF-5989 | Brand: Adafruit
The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature a...
Out of stock
Adafruit 1.54" Tri-Color eInk / ePaper 200x200 Display with SRAM
SKU: AF-4868 | Brand: Adafruit
The Adafruit 1.54" Tri-Colour eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 200×200 pixel display with black, red, and white ink, this breakout delivers high-contrast, d...
Out of stock
Arduino Infrared Remote Control IOT Smart IR Module
SKU: EC-WIS00975M | Brand: Elecrow
The Smart IR Module is a compact infrared transceiver board designed for IoT remote control projects. With four IR transmitters arranged for 360° coverage and an integrated IR receiver, it allows you to learn remote c...
Out of stock
STEMMA Wired Potentiometer Breakout Board - 10K ohm Linear
SKU: AF-4493 | Brand: Adafruit
For the easiest way possible to measure twists, turn to this STEMMA potentiometer breakout (ha!). This plug-n-play pot comes with a JST-PH 2mm connector and a matching JST PH 3-Pin to Male Header Cables - 200mm,...
Out of stock
Adafruit 2.9 Red/Black/White eInk Display Breakout - THINK INK
SKU: AF-1028 | Brand: Adafruit
Add a large, vibrant tri-colour eInk display to your microcontroller project with this 2.9" breakout board. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power com...
Out of stock
Adafruit 2.13 Monochrome eInk / ePaper Display with SRAM - 250x122 Monochrome
SKU: AF-4197 | Brand: Adafruit
Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its i...
Out of stock
Logic Level Converter Module
SKU: FT-LEVEL | Brand: Freetronics
Many of the most interesting sensors and devices are only available in 3.3V or even lower voltage versions, which can be a problem if you want to connect them to a 5V microcontroller such as an Arduino. This module...
Out of stock
OLED Breakout Board - 16-bit Color 1.5 w/microSD holder
SKU: AF-1431 | Brand: Adafruit
A 1.5" colour OLED breakout with 128×128 RGB pixels and 16-bit colour depth, driven by the SSD1351 controller. Because it uses OLED technology, there is no backlight — blacks are truly black with excellent contrast. T...
Out of stock
Adafruit SPI Non-Volatile FRAM Breakout - 64Kbit / 8KByte
SKU: AF-1897 | Brand: Adafruit
The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no pa...
Out of stock
ROS-Compatible 10-Axis IMU Sensor with ARM DSP, BLE 5.3, and Environmental Sensors
SKU: WS-29207 | Brand: Waveshare
Revolutionize Your Robotics and Drones with the 10-Axis ROS IMU SensorDive into Dynamic Orientation and Precision with Our State-of-the-Art SensorTransform your robotic creations into masterpieces of precision and agi...
Out of stock
Adafruit CP2105 Friend - USB to Dual UART Serial Converters
SKU: AF-6065 | Brand: Adafruit
The Adafruit CP2105 Friend provides two independent UART serial ports from a single USB-C connection — no USB hub required. Built around the Silicon Labs CP2105 dual-port bridge, it enumerates as two separate COM port...
Out of stock
Adafruit NeoDriver - I2C to NeoPixel Driver Board - Stemma QT
SKU: AF-5766 | Brand: Adafruit
The Adafruit NeoDriver converts I2C commands into NeoPixel (WS2812/SK6812) timing signals, letting you control addressable LED strips from any board with an I2C bus — even platforms that lack native NeoPixel support. ...
Out of stock
Ultrasonic Distance Sensor with I2C Interface - RCWL-1601
SKU: AF-4742 | Brand: Adafruit
This ultrasonic distance sensor uses I2C communication instead of the traditional trigger/pulse interface, making it easy to integrate with microcontrollers and microcomputers that lack fast GPIO or hardware UART. It ...
Out of stock
Adafruit HTS221 - Temperature & Humidity Sensor Breakout Board
SKU: AF-4535 | Brand: Adafruit
The Adafruit HTS221 is an affordable I²C/SPI temperature and humidity sensor breakout board from ST. It measures relative humidity from 0–100% RH with 3.5% accuracy (in the 20–80% range) and temperature from -40 to 12...
Out of stock
Adafruit SHARP Memory Display Breakout - 2.7 400x240 Monochrome
SKU: AF-4694 | Brand: Adafruit
The Adafruit SHARP Memory Display Breakout features a 2.7" 400×240 monochrome LCD that combines the ultra-low power consumption of e-paper with the fast refresh rates of a traditional LCD. The larger display area and ...
Out of stock
Adafruit 2.7 Tri-Color eInk / ePaper Shield with SRAM - Red Black White
SKU: AF-4229 | Brand: Adafruit
Add a large, vibrant tri-colour eInk display to your Arduino project with this shield. The 2.7" panel displays red, black, and white pixels at 264×176 resolution that remain visible even with power completely disconne...
Out of stock
Adafruit eInk Breakout Friend with 32KB SRAM
SKU: AF-4224 | Brand: Adafruit
The Adafruit eInk Breakout Friend is a driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite displa...
Out of stock
Adafruit 1.54 Monochrome eInk / ePaper Display with SRAM - 200x200 Monochrome
SKU: AF-4196 | Brand: Adafruit
The Adafruit 1.54" Monochrome eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 200×200 pixel black-and-white display, this breakout delivers high-contrast, daylight-readabl...
Out of stock
Temperature Sensor - TMP36
SKU: PI-COM1701 | Brand: Pimoroni
The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn’t require any external calibration to provide t...
Out of stock
Skywriter
SKU: PR-PIM062 | Brand: Little Bird
The big brother to the Skywriter HAT - Skywriter adds 3D gesture sensing to your project! Using our Python and Arduino libraries you can read off the positional data (x, y, z) and common gestures like ...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared