New Arrivals

SKU: SF-DEV-13743 | Brand: SparkFun

The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level shifting hardware, this board allows you to utilize a microSD card at Arduino’s SD...

SKU: SF-SEN-11574 | Brand: SparkFun

Heart rate data can be really useful whether you’re designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart beat. The problem is that heart rate can be ...

SKU: SF-BOB-13717 | Brand: SparkFun

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-friendly arrangement and spacing, and even adds a couple of decou...

SKU: AF-284 | Brand: Adafruit

Note: These use genuine FTDI chips, either we purchase them or they are manufactured to our specifications with the requirement of genuine FTDI chips 10/22/14 - read more. Long gone are the days of parallel ports and ...

SKU: AF-444 | Brand: Adafruit

Add a tiny joystick to your project with this PSP thumbstick. This is a replacement component for PSP1000's, but we think they'd make for a great little joystick/thumbstick add-on for a wearable, or portable pro...

SKU: DF-SEN0162 | Brand: DFRobot

The Gravity Analog UV Sensor V2 uses a GUVA-S12SD photodiode to detect ultraviolet radiation in the 200–370 nm (UV-A) wavelength range. It outputs a linear analogue voltage signal proportional to UV intensity, making ...

SKU: AF-3420 | Brand: Adafruit

The PaPiRus Screen HAT from Pi Supply is an ePaper / eInk screen HAT designed for the Raspberry Pi. Think of it as the older sibling of the PaPiRus Zero.ePaper / eInk is a display technology that mimics the appearance...

SKU: SF-SEN-12642 | Brand: SparkFun

The SparkFun Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of so...

SKU: AF-1918 | Brand: Adafruit

An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable vo...

SKU: AF-3533 | Brand: Adafruit

The Adafruit 0.96" 160×80 Colour TFT Display Breakout is a tiny, high-density full-colour screen driven by the ST7735R controller. Despite its thumbnail size, it packs 160×80 RGB pixels and communicates over 4-wire SP...

SKU: PL-2126 | Brand: Pololu

A breakout board for ST's LPS331AP digital barometric pressure sensor. This sensor measures absolute pressure from 260 to 1260 mbar with excellent accuracy (±2 mbar), making it ideal for altitude estimation, weather m...

SKU: SF-BOB-29094 | Brand: SparkFun

A breakout board for the Panasonic EVQWGD001 roller wheel encoder with press-to-select switch. This tactile input device combines a scrolling wheel with a push button in a compact form factor – similar to the scroll w...

SKU: AF-6348 | Brand: Adafruit

Add reliable wired Ethernet to your microcontroller project with the Adafruit Wiz5500 Ethernet Breakout Board. The WIZ5500 chip handles TCP/IP over SPI, letting you skip the hassle of WiFi passwords and antennas for a...

SKU: WS-29792 | Brand: Waveshare

The Waveshare 10.85" e-Paper Display (G) is a wide-format E-Ink screen with 1360×480 resolution and quad-colour output — red, yellow, black, and white. Using microcapsule electrophoretic technology, it delivers a pape...

SKU: WS-30717 | Brand: Waveshare

Add 4G LTE connectivity and GNSS positioning to your Raspberry Pi with this SIM7600NA-H HAT. It supports LTE Cat-4 data rates (up to 150 Mbps down / 50 Mbps up), phone calls, SMS, and multi-constellation satellite nav...

SKU: WS-31124 | Brand: Waveshare

The Waveshare 10.2" e-Paper Display (G) is a large-format E-Ink screen with 960×640 resolution and quad-colour output — black, white, red, and yellow. Like real paper, it requires no backlight and retains its last dis...

SKU: DF-DFR1103 | Brand: DFRobot

##Introduction The Gravity GNSS Positioning & Timing Module integrates satellite positioning functionality and a real-time clock (RTC). The module automatically obtains satellite time based on a preset calibration per...

SKU: DF-TEL0150 | Brand: DFRobot

##Introduction This is a CAN-to-UART and USB 1.0 communication module that is compatible with both 3.3V and 5V. It supports the CAN 2.0 protocol and incorporates the SLCAN command, eliminating the need for you to conc...

SKU: AF-6067 | Brand: Adafruit

The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...

SKU: AF-6065 | Brand: Adafruit

The Adafruit CP2105 Friend provides two independent UART serial ports from a single USB-C connection — no USB hub required. Built around the Silicon Labs CP2105 dual-port bridge, it enumerates as two separate COM port...