New Arrivals
Fresh stock, freshly listed — our New Arrivals collection is the quickest way to see what's just landed at Little Bird Electronics. From connectors and headers to sensors, modules, and maker essentials, new products are added regularly to keep your projects moving.
Whether you're a hobbyist, student, educator, or professional engineer, you'll find useful components for Arduino, Raspberry Pi, and embedded electronics projects. Shipped fast from Australia to your door.
Serial WIFI Transceiver Module ESP8266
SKU: EC-WWI8266ESP | Brand: Elecrow
This serial WiFi transceiver module is based on ESP8266 SoC.. ESP8266 is a highly integrated chip that has Integrated TCP/IP protocol stack. It offers a complete and self-contained Wi-Fi networking solution, allowing ...
Delivered by Fri 19 Jun
ESP32-S2 Saola 1R Dev Kit featuring ESP32-S2 WROVER
SKU: AF-4693 | Brand: Adafruit
ESP32-S2 Saola-1 is a small-sized ESP32-S2 based development board produced by Espressif. Just about all of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either conn...
Delivered by Fri 19 Jun
TF-Luna (ToF) Micro Single-point Ranging LiDAR
SKU: DF-SEN0340 | Brand: DFRobot
SPECIFICATION Distance Resolution: 1cm Frequency: 100Hz Ambient Light Resistance: 70klux Detecting Range: 0.2~8m Weight: ＜5g FoV: 2° Supply Voltage: 5V±0.1V Data Interface: UART/ I²C Accuracy: ±6cm@(0.2m-3m) DOCUMENTS...
Delivered by Tue 30 Jun
Breakout Board for Micro: bit
SKU: EC-DTS02078B | Brand: Elecrow
This is a GPIO expansion board for Micro: bit. It completely compatible with the Micro: bit and respectively extended the UART port and IIC port. It can make it easy for you to use the extenal pins of the Micro: bi...
Delivered by Fri 19 Jun
Adafruit Mini GPS PA1010D - UART and I2C - STEMMA QT
SKU: AF-4415 | Brand: Adafruit
The Adafruit Mini GPS PA1010D is a compact 25×25 mm GPS/GNSS breakout with a built-in patch antenna, dual UART and I2C interfaces, and STEMMA QT connectors for solderless plug-and-play use. Powered by the MTK3333 chip...
Delivered by Thu 9 Jul
A01NYUB Waterproof Ultrasonic Sensor
SKU: DF-SEN0313 | Brand: DFRobot
A waterproof ultrasonic distance sensor with UART serial output. The A01NYUB measures distance by timing the ultrasonic pulse echo and outputs the result directly via asynchronous serial at 9600 bps — no external sign...
Delivered by Tue 30 Jun
FTDI Serial TTL-232 USB Type C Cable
SKU: AF-4331 | Brand: Adafruit
Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an...
Delivered by Fri 19 Jun
Adafruit Grand Central M4 Express featuring SAMD51 - Without Headers
SKU: AF-4084 | Brand: Adafruit
The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Ar...
Delivered by Thu 9 Jul
SparkFun ESP32 Thing Plus DMX to LED Shield
SKU: SF-DEV-15110 | Brand: SparkFun
The SparkFun ESP32 Thing Plus DMX to LED Shield enables sending and receiving DMX data via an on-board XLR-3 jack or over ArtNet. Designed for developing custom DMX fixtures or adding ArtNet capabilities to existing s...
Delivered by Tue 30 Jun
Maxbotix Ultrasonic Rangefinder - LV-EZ0 [LV-EZ0]
SKU: AF-979 | Brand: Adafruit
The LV-EZ0 from MaxBotix is a compact ultrasonic rangefinder providing short to long-range detection. It can detect objects from 0 to 254 inches (6.45 m) and provides calibrated range information from 6 inches out to ...
Delivered by Fri 19 Jun
Breadboard-friendly MIDI Jack (5-pin DIN)
SKU: AF-1134 | Brand: Adafruit
A sturdy, breadboard-friendly 5-pin DIN MIDI jack with all pins on standard 0.1" (2.54 mm) spacing. Perfect for adding MIDI input or output to your Arduino or microcontroller project without any adapter boards. This ...
Delivered by Thu 9 Jul
XBee 3 Module - RP-SMA Antenna
SKU: SF-WRL-15130 | Brand: SparkFun
After years of popularity with the XBee Series 1 and XBee Series 2, we now have the XBee Series 3 which brings the best of both worlds. XBee 3 not only handles 802.15.4, and ZigBee, but also BLE protocols and you can ...
Delivered by Tue 30 Jun
Bluetooth 4.0 HM-11 Module
SKU: LB-LS1217 | Brand: Little Bird
JDY-08 BLE Serial Transmission Module Compatible CC2541 JDY-08 transparent transmission module is based on the Bluetooth 4.0 protocol standard, the working frequency of 2.4GHZ range, modulation scheme is GFSK...
Delivered by Fri 19 Jun
SparkFun Serial Basic Breakout - CH340C and USB-C
SKU: SF-DEV-15096 | Brand: SparkFun
This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G and takes advantage of the handy USB-C connector. With USB-C you can get up to three times the power delivery over the pr...
Delivered by Tue 30 Jun
Adafruit HUZZAH32 – ESP32 Feather Board (pre-soldered)
SKU: AF-3591 | Brand: Adafruit
The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converte...
Delivered by Thu 9 Jul
SparkFun XBee Explorer USB
SKU: SF-WRL-11812 | Brand: SparkFun
This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, att...
Delivered by Fri 19 Jun
Multi USB-RS232-RS485-TTL Converter
SKU: DF-TEL0070 | Brand: DFRobot
A multi-protocol converter board that supports USB, TTL, RS232, and RS485 interfaces. It can convert signals between any two protocols and supports one input to multiple outputs simultaneously — for example, convertin...
Delivered by Tue 30 Jun
DE-9 (DB-9) Male Plug to Terminal Block Breakout
SKU: AF-3123 | Brand: Adafruit
The DE-9 (DB-9) Male Plug to Terminal Block Breakout makes it easy to create custom DE-9 cables or interfaces without soldering a connector. A solid PCB breaks out all nine pins of the DE-9 plug to screw terminal bloc...
Delivered by Thu 9 Jul
USB/Serial Converter [FT232RL]
SKU: AF-18 | Brand: Adafruit
This USB-to-serial converter adds a DB9 RS-232 serial port to your computer via USB. Based on the FTDI FT232RL chip, it delivers true RS-232 voltage levels (approximately ±10V) rather than TTL 5V — ensuring compatibil...
Delivered by Thu 9 Jul
PN532 NFC/RFID controller breakout board [v1.6]
SKU: AF-364 | Brand: Adafruit
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (s...
Delivered by Fri 19 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
